Hi there! Well I just got a replacement phone from ATT warrenty department and it doesn't come with WM6. My last phone I was able to upgrade it to WM6 but now I seem to be having problems. I am installing:
WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
http://rapidshare.com/files/42972317...T-MR3_Ship.exe
from the Offical HTC Rom thread.
What is happening is I establish a ActiveSync Connection but when it starts to upgrade my screen goes out like a stand by mode but I'm sure i turned it off. When it goes out it looses the connection. It happens everytime. I think i had the same problem last time but I can't remember how I fixed it. Please help me out if! Thanks guys!!!
Hard spl
You didn't do a hard spl didn't you. And why did you post the same question twice next time wait for someone to answer. This is just taking up thread space.
Any way use this then reflash the rom
Vol22002 said:
You didn't do a hard spl didn't you. And why did you post the same question twice next time wait for someone to answer. This is just taking up thread space.
Any way use this then reflash the rom
Click to expand...
Click to collapse
i didn't know i posted it twice? are you refering to an old thread? Sorry about that then...Thanks for your help though. I'll use it. thanks!!! Sorry again...
Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke
y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky
OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!
This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950
harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)
he is asking for unsigned one also (i nv see wrong @ his post)
read again.. he already has 1.40 olinex (which is unsigned)
Hi I have a DIAM 110 and did a unsigned HSPL flash then upgraded to SwiftBlade. Everything was working OK til last night and now when I soft reset my screen bounces and flickers and is all jittery until a few mins after it boots... Anyway to fix that?
Thanks.
The HardSPL you flashed is too old. Try a 1.93 based one.
djvw said:
The HardSPL you flashed is too old. Try a 1.93 based one.
Click to expand...
Click to collapse
Would that be OliNex 1.30? Got a link?
Well I think I fixed it. No more flicker and still unlocked as I flashed the radio firmware to 25.05. I think it's because I have a NAM 3G U.S. Diamond. I attached the HSPL that worked for me and fixed my flicker so other people can search easily for the fix.
The how to sticky uses the older HSPL.
hi guys
as you can see im a total noob to the forums and to updating ROMs on the diamond
my htc diamond is running rom version
version: 1.37.707.1 WWE
date: 06/10/08
radio version: 1.00.25.03
protocol version: 52.26a.25.09H
i find that phone lags a bit and slows down especially when im unlocking with my password.
it also lags a bit when im activating the keyboard to write a sms..
so i guess i was hoping somebody could guide me in the right direction to get the latest rom update, and how do i do it.
i can see there are some custom roms around...so i have no idea whats the best way to proceed..
ive tried to download the latest rom update from the HTC site but it says that my device is not supported?
i dunno, cause i entered in the serial number located under the battery...
so im hoping somebody here can help me out..
thanks!
subs.
More info...
What's your diamond model number? It's under the battery.
You should look into HardSPL and then check out the official ROM's and Cooked ROM's and make a decision on which one you want to flash your phone with. Read the forum's and how-to's for more info...but first you should work out what version of the diamond you have before you go looking for ROM's...also, always HardSPL before you flash!
Good luck.
under the battery it says
HTC P3700 DIAM100
is that what you are referring to?
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
cobbs said:
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
Click to expand...
Click to collapse
yeah, ive been reading that and im slowly starting to understand what i have to do...
i would like to do this rom update on my phone
http://forum.xda-developers.com/showthread.php?t=423418
so from what i understand i first have to install a unsigned hardspl, any recommendations on which version i should use?
1.23
1.24 or
1.34 ?
i was going to use 1.24 only because i saw somebody post saying they used it and had no problems, but if i should use one of the other ones because it will work better then please let me know.
after doing the hardspl install i was going to backup all my contacts and then do the rom update.
am i missing any steps?
do i have to do a radio update before a rom update?
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Prewien said:
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Click to expand...
Click to collapse
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Substance001 said:
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Click to expand...
Click to collapse
Install hardspl 1.40 or 1.93 (I use 1.93, but didn't have problems in the short time I used 1.40) hardspl and then install any rom you like. Just try to read as much as you can because chances are, any question you have, someone else has had it and it's on the board for you to read.
ok cool, i will install hardspl 1.40 and then that rom i mentioned
at the moment i dont have any questions, i will follow that thread that explains how to update roms and hope for the best
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Substance001 said:
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Click to expand...
Click to collapse
if you brick your phone, the only option left is to claim warranty.
And i believe the only step that could possibly brick your phone is flashing HardSPL, right guys?
I was in the same state of anxiety when I did my first ROM flashing. Thankfully it all went smoothly.
My 2 cents :
1, Think about what you are gaining by a ROM upgrade. If your phone is working well out of the box and your routine functions are satisfied, you are well off with you stock ROM. I flashed a couple of ROMs and now I am with my stock and I am perfectly fine.
2, Read this -> http://forum.xda-developers.com/showthread.php?t=416211 and this -> http://www.modmydiamond.info/ And if you understand every single letter of it only proceed.
Happy flashing
i have a diam100. can i flash it to a WWE dutty rom?
thanks for all the help guys, but i decided to flash my htc with the original rom from the htc site.
for the moment it runs like a dream and has fixed all my lag issues.
so im gonna stick with that....for the moment
It's important that you feel comfortable crossing over......but I have to say, when you decide to cross, it's an exhilarating feeling to know that you can select what ever Rom from, what I think are, top notch chiefs here but also the fun continues by selecting which ever Radio.
Many post on here that say, "I bricked my phone," truly didn't brick anything. They just hit a wall so they panic. Hard SPL really does a good job. So the chances of your bricking this device is not as high as some people think..
Hey guys i'm a noob at this stuff.
I'm staying in Italy for the moment so i bought me a HTC diamond.
But the problem is that it's in Italian...
I've tried reading a lot here before making this thread but i just couldn't figure it
on my own anymore.
Can somebody help me with a step by step procedure in doing this in Detail and suggestive links??
The flashing, the radio and the WWE ROM.
If somebody could help me out here i would appreciate it very much
Thanks
http://forum.xda-developers.com/showthread.php?t=416211
read this CAREFULLY to flash a rom in language you want.
Ok i understand that part...cause i've been reading this whole thread for sum time now.. but the problems is that the new WWE Rom...i downloaded it but it says it's corrupted... how do i go about this???
Hard SPL installed? If yes try another WWE ROM
i will check it out....cuz if tried installing HARD SPL Olinex