Could somone give me an idea on how to do this? I've looked at the wiki for the vox which has a similar procedure, is it basically the same?
http://wiki.xda-developers.com/index.php?pagename=vox_radio
Cheers
Huw
If you extract an OEM nbh, you'll eventually get an UNKNOWN file which is ~20Mb.
This is your radio.
Related
im using a tytn and getting errore message
dows the official upgrade is for tytn or doopod ?
anyone can help ??
i try using hard sspl and still .. same
I think it may be because it is a rom for Asian networks... I got a similar error, and will have to manually import the settings for my network providor... other than that, everything else went fine...
I believe there are cabs kicking about this forum to auto setup for various providors.. I think it is trying to auto detect your vendor, and if not Asian, is returning the error
I think thats all the error is showing...
If you've downloaded one of the other cooked ROMs on this site, you should have an exe file called RUU_wrapper.exe.
Now, install WINRAR and right click on the dopod rom and choose extract and it will extract various files, one of which will be another exe file. Extract this exe file again and you should end up with a file RUU_Signed.nbh - this is th only file you'll need out of the lot.
You can delete all the other files from the dopod ROM now, just keeping the RUU_signed.nbh. Copy the RUU_wrapper.exe file into the same folder and run it and you will flash the dopod rom to your phone nicely - just make sure you're HARDSPL first!
Now, you could be even smarter at this point and use dutty's good nbhtool if you like to "unwrap" RUU_signed file and remove the IPL \ SPL (though with HARDSPL, I'm not sure this is necessary) and the Radio part if you like (and the boot splash screens if you're so inclined and then use it to wrap it all back up again.
HTH,
Smiffy.
So I have a .nb0 file I need to load on my hermes device and the instructions I have say to use the lnbms command to do it. Sadly I have HardSPL installed and lnbms does not seem to be recognized as a command. Does anyone know how to load a .nb0 file if I have HardSPL installed?
Thanks,
LouisK
Um ya that makes not that much sence. Do you have a ROM.nbh or Radio.nbh? since you need to have a file type that is compatable with the hermes and I dont think the one your talking about is.
rm -rf *
-fluxist
louisk said:
So I have a .nb0 file I need to load on my hermes device and the instructions I have say to use the lnbms command to do it. Sadly I have HardSPL installed and lnbms does not seem to be recognized as a command. Does anyone know how to load a .nb0 file if I have HardSPL installed?
Thanks,
LouisK
Click to expand...
Click to collapse
Last time I checked, .nb0 files don't go on Hermes devices.
I am in the same boat. I have an os.nb0 that was extracted from a hermes. I want to get it onto my device.... lnbms is the command but it's locked in the bootloader. Anyone know how to get around this?
so, just checking, you've extracted the nb0 file out of a hermes rom and are trying to put it into a loaded os????
Sounds to me like you need to be cooking your own os if you want to do that...
And then reflash time....
I figured it out. The reason that you can not flash a .nb0 with MTTY is the bootloader is locked. Even though the phone may be CID or Super-CID or SSPL or whatever... you MUST have a bootloader that is unlocked and will allow the lnbms command to pass. I have not seen any information yet on this and the hermes. I was able to do this on my htc Wizard though Know that doesn't help but it does atleast tell you why you can't do this action
how do i install/use an nbh file? i looked on the forum and cant find it. please someone either tell me or send me a link explaining how to use nbh files. my computer doesnt recognize the format. thanks.
I suppose you want to upgrade your pda or your phone.
You must use a bootloader to install the file and upgrade your pda. Many bootloaders exist.
For example, I've installed a new ROM with WM 6.1 (from Algasystems) on my iPAQ 4700 and I have used a bootloader that I have found in the thead about my pda (I think I've used MTTY). Than I suppose you can find yours in the thread where you have downloaded your ROM .
To flash .nbh files you need a custom.RUU (Rom Update Utility) .nbh fiels are only flashable to certain devices, i.e. HTC Kaiser, Tilt, TYTNII, etc.
Older devices flash with a variation of this. What is your device type?
I've succesfully SID unlocked my Diamond and I flashed the following ROM:
QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I now want to extract the SPL and flash it from that ROM. I use this tutorial:
http://forum.xda-developers.com/showthread.php?t=335568
It's pretty simple, but the NBH file I created using HTCRT is 528K and it gives me a message that the NBH is greater than default. In the tutorial it says:
9. You should now have a NBH file that is relatively small (about 258K)
I've tried several ROMs, but with the same outcome.
I haven't flashed it yet, but I don't know what I am doing wrong?
Why are you following Kaiser instructions?
Look here:
http://forum.xda-developers.com/showpost.php?p=2460876&postcount=3
squ1zzy said:
I've succesfully SID unlocked my Diamond and I flashed the following ROM:
QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I now want to extract the SPL and flash it from that ROM. I use this tutorial:
http://forum.xda-developers.com/showthread.php?t=335568
It's pretty simple, but the NBH file I created using HTCRT is 528K and it gives me a message that the NBH is greater than default. In the tutorial it says:
9. You should now have a NBH file that is relatively small (about 258K)
I've tried several ROMs, but with the same outcome.
I haven't flashed it yet, but I don't know what I am doing wrong?
Click to expand...
Click to collapse
ROM is locked from being dumped. The kaiser tut should work isn't it?
Hi guys, I'm currently trying to update my Rogers HTC Touch Diamond to the WWE 2.07 ROM which i downloaded from here:
http://forum.xda-developers.com/showthread.php?t=512505
I have HardSPL, and I've updated my radio before, but never ROMs. So When I tried to run this official RUU, it seemed like it started (saw progress bar at 0%), but then my phone resets and the RUU gives me an error message saying "Invalid Model ID" and something like "This utility cannot be used to update your device". How do I get around this?
I read the thread which explains how to get around the invalid model id error, however it requires that I extract the NBH and build a new one. However, I only have the RUU of 2.07, not the NBH. There's one posted in the thread, but it only contains the OS. Can someone please provide me with a NBH for this ROM (Complete with the OS/Splash/etc, but radio and SPL not required)??? Thanks.
hi if you have an official rom which is a EXE file just use winrar to extract the files you need then flash using the internal storage.
I hope this helps you.