May I buy O2 diamond from Germany and reflash it for WWE version of ROM?
Which bad cases can be?
Yes you can...
A bad case would be if the flash went wrong... brick. But with HardSPL you should be on the safe side.
pkoper said:
Yes you can...
A bad case would be if the flash went wrong... brick. But with HardSPL you should be on the safe side.
Click to expand...
Click to collapse
If you use Hard SPL, it won't brick.
pkoper said:
Yes you can...
A bad case would be if the flash went wrong... brick. But with HardSPL you should be on the safe side.
Click to expand...
Click to collapse
Thanx.
Are you used original HTC diamond or O2 Diamond?
Related
I need to downgrade my rom for warrany purposes (the OK key is stuck) But when I load up my Original ROM when my unt goes to the bootloader tingy, it disconnects from activesync and just well.. does noting.
Please help, anyone?
Thnaks
Execute SSPL and then run the RUU.
EDIT: Note that Hard-SPL (which I assume you have installed) will not protect you from failure because the original ROM has its own bootloader that it will put on your device, which is a good thing in terms of warranty, but a bad thing in terms of a power outage.
Original rom
Did you manage to do it and revert back/
look at this guide http://www.mrvanx.org/hermes_guide/
Yep, the guide will help you through doing this. It takes a slightly more time consuming approach but you are almost guaranteed not to permenantly brick your device doing it this way, as the last thing to be flashed is the radio, then the SPL.
Ive read the guide when i wanted to upgrade and its very helpful. Did'nt notice there was a segment on downgrading which i believe will be helpful as well. Thanks for your patience and answering, you guys are kind, for pointing me in that direction.
HArd SPL? Uh, no I didn't install that.. should I?
Trancecoder said:
Execute SSPL and then run the RUU.
EDIT: Note that Hard-SPL (which I assume you have installed) will not protect you from failure because the original ROM has its own bootloader that it will put on your device, which is a good thing in terms of warranty, but a bad thing in terms of a power outage.
Click to expand...
Click to collapse
HArd SPL? Uh, no I didn't install that.. should I?
Sorry for asking but what is an SSPL?
It's funny!!! If you don't know (yet) what is SSPL and did not (yet) installed HardSPL, Wow did you install a WM6 cooked ROM?
dcoelho said:
It's funny!!! If you don't know (yet) what is SSPL and did not (yet) installed HardSPL, Wow did you install a WM6 cooked ROM?
Click to expand...
Click to collapse
Yes, I installed a WM VI 2.0. Anyone please tell me what is an SSPL?
@ Deadman
I would suggest you start reading here: http://forum.xda-developers.com/showthread.php?t=293651
Then go to the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and do a lot more reading before you really do something even more seriously seriously nasty to your phone.
You should have installed Olipro's Hard-SPL before any kind of rom upgrades.
There is also a complete guide on the wiki to unbricking your phone.
Got it, thanks.
Thanks
chrisjasper said:
@ Deadman
I would suggest you start reading here: http://forum.xda-developers.com/showthread.php?t=293651
Then go to the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
and do a lot more reading before you really do something even more seriously seriously nasty to your phone.
You should have installed Olipro's Hard-SPL before any kind of rom upgrades.
There is also a complete guide on the wiki to unbricking your phone.[/QUOT
Click to expand...
Click to collapse
Thanks
I would like to thank those who helped me. I downgraded it using SSPL then RUU. Thanks
Is there any way to restore the original SPL on the devide after the 2.03 flash? Just let the warranty to live again?
Thanks.
Bye
u can flash the SPL back to the original (there is a list of them somewhere here, probably in the Wiki)
you will need to go back to a original ROM and Radio first tho (dependant on the branding of the handset)
mugglesquop said:
u can flash the SPL back to the original (there is a list of them somewhere here, probably in the Wiki)
you will need to go back to a original ROM and Radio first tho (dependant on the branding of the handset)
Click to expand...
Click to collapse
Can you understand Polish? I know where you can find the answer but in Polish....
well.. no Polish I'm sorry!
I'm Italian....
Actually I have the original Rom 2.03! I had to use the Hard SPL cause the Vendor Lock. But now I would like to replace the original SPL to get my warranty restored.
try this :
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
My Diamond keeps on rebooting on me and is hard resetting itself randomly :-(
I had udK's latest flashed when that started, but reflashed 3 times now with other ROM's.
How can i make sure that my phone is broken, or is there any known way to fix this ?
Thanks for any help!
Which Hard SPL you got?
garlog said:
Which Hard SPL you got?
Click to expand...
Click to collapse
Hard-SPL 1.40 Olinex SIGNED - can try to upgrade to a newer version... Do you think that might help ?
Matmax said:
Hard-SPL 1.40 Olinex SIGNED - can try to upgrade to a newer version... Do you think that might help ?
Click to expand...
Click to collapse
Maybe, but look at these threads....
http://forum.xda-developers.com/showpost.php?p=2984793&postcount=4
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
http://forum.xda-developers.com/showthread.php?p=2895628
Flash the unsigned then reflash a working rom (e.g. AZATOR x2 WWE) and then HardReset.
If that does not work maybe something is wrong with your device (hardware).
garlog said:
Flash the unsigned then reflash a working rom (e.g. AZATOR x2 WWE) and then HardReset.
If that does not work maybe something is wrong with your device (hardware).
Click to expand...
Click to collapse
the hard reset is a very important step. dont forget to do this.
Sorry my english.
When I was putting a new room and asked to reboot never took on. Appears on screen:
IPL 3.13.0001
SPL 1.11.0000
GDM 02.94.90
OS 3.13.0.0
What to do now? How do the bootloader?
READ BEFORE POSTING
All´s is in the wiki.
ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse
I don't found anything about this problem, i have also got a ARTE100 with IPL 3.13, and i can start it or charge it on power...
I don´t understand what you say. I need help.
ark666 said:
READ BEFORE POSTING
All´s is in the wiki.
Click to expand...
Click to collapse
AsusA5EB said:
I don´t understand what you say. I need help.
Click to expand...
Click to collapse
AsusA5EB, your ARTEMIS is dead, i've exactly the same problem since 3 weeks.
You can try, to enter in bootloader : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.
Hi there...
Do not worry your phone is not dead.
Read some things about USPL and than if it doesn't helps (and it won't, because I presume that you can't synchronize it with active sync), read something about MTTY and how to use it.
Be patient, read carefully and you'll make it.
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.MTTY will solve your problem.
Spend some time reading and you'll do it.
Cheers
Z
zikizile said:
Hi there...
By looking on your report from splash screen I can see that you have done USPL....but it went wrong.
Click to expand...
Click to collapse
How can you tell USPL went wrong? I have the same IPL & SPL values in my device and everything looks good..
Ok, my phone is dead, the screen was break avec the power switch is dead....
ark666 said:
I think u should tell us what rom u flashed on your device in the first place.
Flash original rom to solve the issue, if not, u can use mtty to reset flash, and then install your original rom.
U guys already know that before flashing ANY rom besides your local CID, U MUST UNLOCK IT BY USING USPL.
Like i told u, all´s in the WIKI.
Click to expand...
Click to collapse
Hi,
Can you please tell me which ROM, RADIO do you use for ARTEMIS?
Thanks.
hello.. i flashed my device several times but all 6.5 were buggy and slow on my phone.
Im looking forward for the latest 6.1 OEM Version in German for my O2 HTC Touch Pro 2.
Is there any Rom release? How may i delete the custom boot loader (SPL Unlock)?
jsut download the original o2 rom from the o2 website, and then put it to the device! and u can´t change the bootloader back.
regards..
you can revert the bootloader using the instructions in hard spl thread.
Dave
oh thx, didn´t know that!
but what is the point of putting the original bootloader back, when u want to flash the device again?
cheers...
dwausfsanderi said:
oh thx, didn´t know that!
but what is the point of putting the original bootloader back, when u want to flash the device again?
cheers...
Click to expand...
Click to collapse
For warranty return.
HTC know to lookout for the OliNex bootloader .
Dave