I just installed the latest WM6.1 rom by Kavana. I'm trying to connect to my private/work network, and I need to use EAP type "Smart Card or Certificate", but only PEAP and TLS are listed. Are there any solutions to this issue? I searched on this forum, but could only find the same question asked (but not answered) here:
http://forum.xda-developers.com/showthread.php?p=2028467&highlight=Smartcard#post2028467
Thanks!
Sorry for the lack of details but I had a similar problem. There are several google references to various ways to get certificates working. You can also disable certificate checking which is what I elected to do for now.
To force WM5 or WM6 to accept the PEAP server's certificate without attempting any other validation, add the following registry key:
[\HKLM\Comm\EAP\Extension\25\]
"ValidateServerCert"=dword:00000000
This worked for me. More good hacks and the full article/blog http://www.mobilewave.ro/forum/topic-2549.html
Can you link to those several references on google? Why is the smartcard or certificate option missing from this rom anyway? Are there any registry hacks to get this option back?
Hey man, do your home work and google and you can always change the registry entry if you think that the network your are connecting too is not trustworthy. Otherwise I think you will spend many hours of trial and error like I did.
I tried
"ValidateServerCert"=dword:00000000
I am still not able to connect to network. Also as said above, the TLS is not showing the certificates & smartcard. Also when I click on TLS "properties" nothing shows up. I have certificates installed, I can see it from Settings->Security->Certificates.
Any help. It is getting very frustrating.
Bump. Please chime in.
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
as my title says that i would like to change TTLS to be Enable 'cause Im at Taiwan. im using the Wimax that requires ID and Password.
can someone help plz. do i need to open system.img as hex mode to change just like changing center frequency, but i couldnt find where it is.
and i also tried to dial ##3282#, but it didnt work.
thanks for your suggestions
Does anyone know the answer? I'd like to know also. I see that those two parameters are not configurable in the ##data# menu
bump, how can TLS be turned off? Is this in the wimax radio image or elsewhere?
Okay, a family member of mine purchased a One V and I rooted it, but I kept it stock so it's close to normal. But after all this it had MMS issues which I fixed temporarily with editing the APN's, but here's the issue. In most build.prop's they contain certain lines like gsm.operator.numeric=***** which is the country code and carrier code, this can be bypassed and work on any ROM if you edit APN's but it causes issues with videos if they send you videos.
I downloaded an app to check the MMC and MNC and they are listed as 311/270, the code I need to enter is 310/120, but on the stock ROM there is no way to alter the MMC or MNC as there are no numeric entries in the build.prop, so they are located elsewhere in the ROM, but I cannot find them, obviously an app like MCC and MNC info for US (app) can locate them and know's where the values are, but it doesn't say. So I cannot alter them.
Does anyone here know where to locate the needed file(s) I need to edit to change these values? This is a CDMA phone and not a GSM, So I don't know if that means the possible location would be different on a stock GSM/CDMA One V ROM. Also I have tried going into both PRL settings (##775#) and found nothing, and also EPST edit mode (##3282#) and the only thing in EPST settings is the MCC and MNC, but they are both set at 310/33, not the 310/120 I need, or the 311/270 that the MCC/MNC check app report back. So somewhere within the ROM's files the file that is reporting my SIM Operator Number as 311270 is conflicting with the correct settings.
Hi,
Is there a way to setup proxy settings on this thing like on an android phone? I've looked but I can't find a place to put the settings in.
Is there an app I can sideload to do this?
Thanks,
Ltjesse
If you find a solution for proxy, please let me know . I'm searching also ..