Hi guys, i don't know how to use the SD card...well, i put it in the slot but i can't see it...can you help me???...thanks...
Sorry for my english, but i'm Italian!
nobody know what can i do?!?
Help me please...
can u see the card on other devices like card reader.
sorry but the only device that i have to read sd cards is my blueangel...
some ideas to resolve that problem???
gianlu91best said:
sorry but the only device that i have to read sd cards is my blueangel...
some ideas to resolve that problem???
Click to expand...
Click to collapse
oh man! u must either try your sd card on some other device or try some other card on your BA. u can buy a card reader they are very cheap.
I've tried the sd in an other device and it works and i've tried an another card on my ba and it don't see it...so, where is the problem?
sorry for my english!
PS: in memory there is wrote: memory not installed
gianlu91best said:
PS: in memory there is wrote: memory not installed
Click to expand...
Click to collapse
dont worry few days back i hv repair my device. Here in all sd slots three pins are placed in order one above another. when we insert the card in unlock mode (without write protection) pin 1,2 and 3 get shorted. when in lock mode only 1 and 2 get shorted. shorting of 1 and 2 gives the presence of card and 2 and 3 gives the lock status. In your case pin 1 and 2 are not shorting.
Problems
1. the pin get damaged.
2. the pin get desolded.
i hv solution for both.
step 1 open ur device.
step 2 check the status of solded pins. (view images)
step 3 Re solder them.
step 4 if above does not work short the two points with a small wire.
if u hv applied the step 4 do not remove the card from the device for a long time as shorting of 1 2 gives the presence of card.
and if u r not comfortable with this send ur device to me.
OK thanks....tomorrow i'll try to repair it...when i've done i'll advise you...thaks...
just one more question...How can i open it???...thanks...
gianlu91best said:
just one more question...How can i open it???...thanks...
Click to expand...
Click to collapse
search wiki for how to disassemble BA.
well...yesterday evening i've opened my BA but i didn't find the pins that i have to control...where are they exactly????
thanks
look at the red arrows. U cant see the pins as they r behind the metallic protection on which numbers r written.
gianlu91best said:
well...yesterday evening i've opened my BA but i didn't find the pins that i have to control...where are they exactly????
thanks
Click to expand...
Click to collapse
ok...i've controlled the pins and they appear good but the problem perists...maybe i've not installed some driver or something like that...
i dont think so that u hv shorted the pins (1,2) and if u hv try some other rom.
Related
i lost the ablity to snyc by usb somehow but i can use bluetooth to move files around and whatnot. i appear also to have lost my camera controls also.i got this from a buddy heading out to the frontier(afganistan) any ideas on how to bluetooth an upgrade
Not possible. Try the memory card way if it exists for the Excalibur.
but it mentions that you have to be connected by usb
warlock123 said:
but it mentions that you have to be connected by usb
Click to expand...
Click to collapse
No, get a card reader, put the image file on it (rename it per the instrucitons) and enter bootloader.
ok my newbiness is showing like a solar flare,which 6.1 are you talking about.
also from the theads that i read it appears that for each advance the risk of losing things like cameras go up.oh well no risk no fun
please explain that last post someone.if i'm understanding you correctly i download to my sd card the upgrade program and let it runs
warlock123 said:
please explain that last post someone.if i'm understanding you correctly i download to my sd card the upgrade program and let it runs
Click to expand...
Click to collapse
Flashing from SD Card?
Hey , my htc kaiser went through alot of flashing in the past gre weeks , and now it wont flash ANY new nbh files , so I am stuck with a 2.6.25 version nbh. i cant use Hardspl like I was using , and now it wont work with the sd card , but it will go to the tri colored screen. Any suggestions would be appreciated
I came across the same problem. I also wanted to flash a new nbh file trough the sd card but every time I tried it goes directly to "serial" when I do a hard reset.
check for the correct file name. file KAISIMG.NBH must be in the root of your sd card.
it is , but it still wont flash
is USB still working?
if it does, just extract the RUU exe from an ordinary rom upgrade pack,
put the nbh u want to flash in the same seperate folder with RUU (on your desktop not your SD of course =] )
then execute RUU
it should work fine in the Tri-COlour screen.
It wont work in usb , thats how I always flashed it , but now on the tri colored screen , it says usb , but the RUU cant find the device? Its so confusing ahaha
DreadCode said:
It wont work in usb , thats how I always flashed it , but now on the tri colored screen , it says usb , but the RUU cant find the device? Its so confusing ahaha
Click to expand...
Click to collapse
Please allow me to guess around and list out possible solution,
I do wish to suggest any solution to work it out
I guess there are few possible things to check out,
like hardware,
is the usb port of your Kaiser having bad contact. are the pins having bad contact.
ever tried to replace USB cable or use another computer to try
ever tried another SD card? Flash memory does wear out in continuos read and write.
Software:
Ever tried official WM flashing pack?
What about re-do HARDSPL install? I remember there are tutorials around on how to remove HARDSPL and then reinstall HARDSPL yourself.
**PS: My own very-UNprofessional opinion: probably there is something wrong with the HARDSPL, so it wont recognise itself correctly to RUU, nor recognising NBH file on SD corerectly.
Good luck mate, looking forward to your speech of joy =]
Im not exactly sure about the usb port , Before I started flashing , it worked fine with a usb wall charger , now it doesnt , but USB debugging always comes up , and it will only charge with a usb port into a computer . so I have absolutly NO clue
Any suggestions?
You may have a worn USB socket on your phone. By the way you are talking about as much flashing as you do, that could be the root cause of the issue.
One thing to try is to clean the contacts on the USB socket of the phone by using an air duster or other compressed air source to blow any garbage out, or (my personal favorite, produces the best results) you can use a small amount of WD-40 sprayed directly in the socket with the extension tube attached. A SMALL AMOUNT WILL WORK! Don't go soaking the phone in WD-40 as this could have ill effects on the phone (I have NEVER used more than a drop or two at any one time, directly on the contacts).
Hope this helps...
ill try that But it still doesnt solve the problem of not being able to flash from SD card?
Sorry, I must have missed the SD card thing in your first post.
There is also a known issue with the ribbon cable that goes from the base to the screen/D-pad/SD socket/etc.
The SD reader is part of the tilt assembly with the electronics for it built into the screen half with the socket/receptacle. In order to use less wires to operate it, they designed it using the USB standard 4 connectors, reducing the extra terminals on the ribbon to 3 (ground is common on the tilt panel).
There's a disassembly thread around here with detailed pictures showing the board being removed from the face.
You could try the WD-40 trick on the contacts of the SD reader, but I'm doubtful thats where the problem is.
The only reason I know all this useless crap is because I had to disassemble one of my Kaisers to replace the screen/touchscreen assembly, which is connected to the same board as the SD/D-pad.
This worked for me!
I once had the same problem and this is what I did:
First bring your phone back to the tri-coloured screen, then flash your ORIGINAL rom that came with your phone. For example with the MDA Vario III you need to flash the Win Mo rom provided by T-Mobile.
Once you have done this reinstall HARDSPL exactly as written in this tutorial: http://forum.xda-developers.com/showthread.php?t=433835. And the final step is to flash your phone back with a KAISIMG.NBH file on a fat32 formatted sd card.
Hope it works and good luck!
All the credits go to l1q1d though who gave me this advice
That's a problem because he can't seem to flash anything through the USB port or from the SD slot. I'm sure he would have flashed back to WinMo by now, if he could.
Haven't heard anything back from him yet...
Try another MicroSD card, or just let windows Disk Check utility correct the filesystem errors.
Put the microSD card into Card reader, use HP USB Disk Storage format Tool to format the card to FAT, Transfer KAISIMG.NBH to your phone.
Recharge your phone TO ATLEAST 50%, or the update will fail.
Boot into bootloader and try installing nbh.
I am pretty sure you have corrupted SD Card. Try another miniUSB cable on your Kaiser. While phone is off, Take out SD Card, Then Keep Camera Button pressed and PLUG IN USB Cable, the phone will boot into tri colour screen saying USB. (Disable USB Connections from activesync)
Run RUU Utility to flash the Official Kaiser Rom
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
rollride said:
Trying to flash another .nbh but whe i go to three color screen i got no image tested with different kernels tested with windows nothing happens! Any suggestions?
Click to expand...
Click to collapse
Format de SD card, and leave only the KAISIMG.NBH in it. FAT32
ok i will test and share the result thanks for the fast suggestion !
have a nice day
rollride said:
ok i will test and share the result thanks for the fast suggestion !
have a nice day
Click to expand...
Click to collapse
Damn... i said that ?? Can't remember....
Anyhow, post back results
same thing
after format same result no image file ...
So... your SD card is formated as FAT32, the file is named, exactly, KAISIMG.NBH, and the device does not detect it...
Question number one, is the sdcard ok ?
Question number two, is the sdreader ok ?
hell yeah
Everything is exactly how it should be. Except i was thinking also that sd card may be the problem but after a few tries with different cards i found out that the card is not the problem. After all i think that may be this is fault of the guys i took my phone to repair usb port but after three weeks later they didn`t, telling me that for my phone there is no port `cause it wasn`t as normal kaisers` port it is mirrored and the can`t find such in the internet to order (my kaiser is from T-mobile from Germany) and after they gave it back to me it started to make this weird thing...
Anyway thank you for your fast answers and suggestion really appreciate your help dude i wish you the best!
"Mirrored" USB port?
Sounds like a regular Kaiser multi-port to me. Kaiser, Tytn, Raphael, and a whole bunch of other HTC phones use that port.
Double-check and triple-check that ATools recognizes the file as a true Kaiser image.
You can name it whatever you want but if the file signature doesn't match what the SPL is looking for, you won't get it to install.
Which SPL are you using and did the "repair" people reflash the stock SPL ont the phone?
And... how long before the gray screen says "No Image File!"? If the image is wrong you will most likely see a group of 8 numbers across the top of the screen.
If you see these numbers, the image file is wrong.
?!?
the spl is 3.56.Hard CPLD-8
THERE is no numbers just displaying really fast no image file it took a long time to even read it `cause it is displaying it very fast and after that is back to three color screen ! I really don`t have any ideas any more ...
Success i formated in fat after that fat32 and this trick worked !
I was just about to ask about formatting...
Good to hear you figured it out!
When this "strange" issue pop up with sdcards and usb flash drives, i always resort to the the old HP SD Format tool
http://en.kioskea.net/download/download-127-hp-usb-disk-storage-format-tool
i will have it in mind next time ! thanks you !
Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/
Do you have the SCHUIMG.nbh?
Would be really reat
Best regards
Oberoth
Oberoth said:
Do you have the SCHUIMG.nbh?
Would be really reat
Best regards
Oberoth
Click to expand...
Click to collapse
here you go
http://forum.xda-developers.com/showthread.php?t=1058918
there are the files for more then only hd7
the thing is we already know this for mounts but nobody listen
fearlessdolphin said:
Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/
Click to expand...
Click to collapse
Works great! Thanks man.
Guys, if a detailed tutorial is needed with a cheeper way of doing that without buying the XTC CHIP - tell me and i'll write something.
Finally I can deploy Apps !!!!!
Ofir.
Hey ofir
You do not need the xtc clip. Just any preprogrammed SD card or create a gold card yourself. The entire setup cost less than $30. Well worth it.
fearlessdolphin said:
Hey ofir
You do not need the xtc clip. Just any preprogrammed SD card or create a gold card yourself. The entire setup cost less than $30. Well worth it.
Click to expand...
Click to collapse
Yes, I know. I've used about 5$ to setup the necessary for fixing the device.
But the tutorials wasn't so good, that's why I've suggested to write a proper guide.
Ofir.
Thanks Ceeshism. I wish there were less condescending people on this site like ofir here, who after reading this post will only reply with another argument.
Can we just do the hd7 hard reset for it.Cause i use the dfrouter now i can't connect to my pc or even zune.
Edit: I try hard reset it didn't work.
ofir54321 said:
Yes, I know. I've used about 5$ to setup the necessary for fixing the device.
But the tutorials wasn't so good, that's why I've suggested to write a proper guide.
Ofir.
Click to expand...
Click to collapse
How do you make the setup? Can you tell us?
I'm still a bit shocked, but it worked! HD7 is talking to Zune again.
Thanks!
team23 said:
I'm still a bit shocked, but it worked! HD7 is talking to Zune again.
Thanks!
Click to expand...
Click to collapse
how did you do it. i already have the cables.
Ttblondey said:
how did you do it. i already have the cables.
Click to expand...
Click to collapse
just copy the file on a gold card.
connect the goldcard using a Y-Cable to the phone (one side to phone,one side to goldcard,one side to powersource )
then bring phone in tri color (bootloader mode)
it should automatically see the goldcard and the diag file gets loaded.
follow instructions on screen.
ok thanks.
The problem is creating the goldcard although i have copy the 2 files in my m2 memory card from my multicard reader.
Ttblondey said:
The problem is creating the goldcard although i have copy the 2 files in my m2 memory card from my multicard reader.
Click to expand...
Click to collapse
"m2 memory card" ?
only sd cards will work and only smaller then 1 GB
"multicard reader" you can't use that one , it need to be a "microsd card reader"
(something like this " http://www.varologic.com/blog/post/...oduces-new-MicroSD-Micro-USB-Card-Reader.aspx " )
fearlessdolphin said:
Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/
Click to expand...
Click to collapse
Well I do not give the option of diagnostic mode, just install the rom and nothing else, I get on the radio screen, bootloader, and you rcust, nothing more,I do not appear in either Flash Mode or Diag Mode
Hi all,
After an accident, I had loose my phone in the water. After dry it, The SD card is not yet recognize.
I had tried an other one ( that working on other device) but not recognize, and my SD is recognize by the other phone.
Could you please help me?
I need it to save my picture. Without the SD card, the camera won't do the picture.
M.
"My arc is rooted."
Keep drying it.
Sent from myushi
I dry each part of it still 2 weeks now but no sd recognize :s
manix0 said:
I dry each part of it still 2 weeks now but no sd recognize :s
Click to expand...
Click to collapse
Take it to a service centre, sounds like hardware damage.
Sent from myushi
my arc is too old to put it to device centre.
so I try to find solution to use it like it is but many issues :s. The most import one is picture.
I can't do the picture because it want to store it to sd card.
Is it possible to change directory?
Thnaks for your help :good:
manix0 said:
my arc is too old to put it to device centre.
so I try to find solution to use it like it is but many issues :s. The most import one is picture.
I can't do the picture because it want to store it to sd card.
Is it possible to change directory?
Thnaks for your help :good:
Click to expand...
Click to collapse
sdcard\DCIM\100ANDRO <-- Pictures taken using Sony Camera
sdcard\DCIM\Camera <-- Pictures taken using AOSP Camera
sdcard/pictures/screenshots <-- Screenshots
Best Regards,
[email protected]€r..
Thanks for your help but i don t have access to sd card due to water accident.
Up .
Do you have idea?
Download lgCamera from market:it let you choose the storage location.
Inviato da me!
manix0 said:
Hi all,
After an accident, I had loose my phone in the water. After dry it, The SD card is not yet recognize.
I had tried an other one ( that working on other device) but not recognize, and my SD is recognize by the other phone.
Could you please help me?
I need it to save my picture. Without the SD card, the camera won't do the picture.
M.
"My arc is rooted."
Click to expand...
Click to collapse
Maybe,what i'm gonna say sounds stupid but give it a try.Try flashing the software i't might fix the problem.I would try that if i were you.Good luck hope you'll fix it
Sent from my LT15i using xda premium
Hi,
I had flsh it several time since my probleme but no solution.... :s
I had installed lg camera but i can t change the value in the option of storage. when I click on it the window that appear is blank ....
Thanks for your help
manix0 said:
Hi,
I had flsh it several time since my probleme but no solution.... :s
I had installed lg camera but i can t change the value in the option of storage. when I click on it the window that appear is blank ....
Thanks for your help
Click to expand...
Click to collapse
You have to click on folder picture..
arcatarc said:
You have to click on folder picture..
Click to expand...
Click to collapse
I don t have icon .
On other settings / format of file names and under folder to save photo and video (/mnt/sdcard/DCIM/Camera
If I click on it to change it, it open new windows with nothing else that 3 button ( default/apply/cancel) but no other info or file directory !!!
manix0 said:
I don t have icon .
On other settings / format of file names and under folder to save photo and video (/mnt/sdcard/DCIM/Camera
If I click on it to change it, it open new windows with nothing else that 3 button ( default/apply/cancel) but no other info or file directory !!!
Click to expand...
Click to collapse
Try adding this line in build.prop
#camera DCIM dir. 0:sd only; 1:nand only; 2,sd first
ro.camera.dcim=1
how it is possible?
manix0 said:
how it is possible?
Click to expand...
Click to collapse
you need a file explorer like root explorer.
When your phone's wet, did you try to open it? Because if you do so, maybe it got shorted, maybe you should bring it to the authorized servc. Center
Sent from my LT18 using xda premium