Develop Bugs

my ARTEMIS is blocked "BRICK" please help

I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!

brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked

the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick

uspl does not work. this is the point you can not get it.

have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli

my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this

How can I unbrick my Artemis ?

Hello !
First, sorry for my english.
Then, my SPV M650 (Artemis) is bricked.
It shows "Searching for SD Card" and still stay on the bootloader screen (the muticolor screen) and nothing else.
On the bootloader scren I can see the IPL and the SPL numbers :
IPL: 3.13.0001
SPL: 3.13.0000
When I connect the phone via an USB cable, on the phone screen I've got a "USB" item appears at bottom left and Windows XP see a pocket PC connected (but not activesynced).
When I tried to reflash it with the RUU tool, I always got an error 260.
The RUU tool can't connect to my phone.
For me, the SPL is not good but I don't know how to change it with my phone in this state.
I tried to flash it directly with a 2GB SD card (FAT32 formated) with only a ".nbh" file at the root directory but it don't work.
If someone got an idea... I will take it with pleasure...
Thank you for your help.

Hi,
Are you following these instructions:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I see from your SPL that you are not using the USPL so your flash image would have to be your original unmodified SPV M650 flash image. The name of the image file must be ARTEIMG.nbh or it will not be found.
Hope that this helps,
Matt.

Thank you for your help.
The phone is always on the boot loader but the flash with the original Orange ROM modified my IPL and my SPL (only after the second flash).
New IPL: 1.84.0001
New SPL: 1.84.0000
The flash not take 30min as follows in the wiki.
The steps during the falsh are :
- Checking SD Card
- Validation
- Formating BINFS (1s)
- Reading from SD (5min)
- Verifying certificate (5s)
- Flashing EXTROM (1s)
- Flashing GSM CODE (1s)
- Flashing first phase OS (10s)
- Reading second OS from SD! (5min)
- Flashing second phase OS (3s)
- Success. Press any key.
=> Back to bootloader.
So the phone still bricked.

It seems that you have now a working IPL, so now try to flash the USPL, after that your phone should have SPL 1.11.000 (or so )
Link: http://forum.xda-developers.com/showthread.php?t=311403
After that you should be able to flash any ROM you like.
Don´t forget to first flash a Radio!
Link: http://wiki.xda-developers.com/index.php?pagename=Artemis_RadioUpgrades
Good luck!

Thank you four your help mat2206.
But how can I flash USPL with a bricked phone ?
From SD card it's not work. I get a "Invalid certificate" error.
And for flash a new radio or ROM version, I will need the USPL...
Any ideas ?

Damned !
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?

drummer01 said:
I find the way to flash USPL.
But I've got an 270 error when I did it at 99% of the flash.
Now the phone don't turn on. Not feels good...
Any ideas ?
Click to expand...
Click to collapse
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...

HTC Assistence
cesconoa said:
You need HTC assistence! You have damaged the SPL and now the phone is died!
You can't power on, you can't start bootloader, you can't do anything...
Click to expand...
Click to collapse
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...

drummer01 said:
Thank you for this news.
But the phone is not under guarantee.
And I don't want to pay much money for unbrick my phone...
Click to expand...
Click to collapse
I hope you find a solution, I don't know if it's a way to write the rom without bootloader (something like JTAG)...
I've read a way in the assistence manual, but you need a particolar sim card...

How can i Solve Brick Mode O2 XDA 3

Hi
My device has a German ROM.
I tried to Rom Upgrade to my O2 XDA III PDA but it doesn't work!
when i flashing the device it's freeze on process at%41 and give a error message. i unplugged the device craddle and flash same ROM again and process completed succesfuly. After all when i turn on my device ,there is only 3 Color on screen (Blue - Green - Red) and at the bottom of device is white. it writes R.1.10.00 at the right bottom of the screen.
Sorry about my english ! i searced it on web but i found a information and it tells find same type device and update ROM with FAT 32 Formatted SD Card.
Can anybody help me for Solve This Problem.
Thanks.

1. do you use vista/7 ?
2. did you forget to take out the sim and sd card during flashing?
that would be 2 possible reasons why you had the error in the first place.
now for the solution: if the flash was really complete and successful, which at this point you cannot tell by the success message, have you performed a proper hard reset?
the instructions on how to do that are to be found here: http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
power+reset, record+camera, then set the menu options to No, Yes, Yes confirm with the mail button.
rom upgrade through the sd card is generally not such a good idea, since it has never been fully confirmed, that and how it works.
if the hard reset does not solve your problem, you should read -=this=- really carefully and think whether you really did ALL the steps, they are all equally important.

Problem is getting worst !
Thanz chieff for your Help.
Problem is getting worst and confusing. i updated Radio version to 1.10.00 to 1.15.00. Device is turn on but it doesn't boot. My Device has no camera. When i plug it to creaddle it's orange led is ligthting and randon times it boots and 3 Colored screen shown. R.1.15.00 D.****** G******
HTC Blue Angel Windows Mobile 6.1 WWE only. But now it's do nothing. This morning i made hard reset to device and shown SERİAM V.2.07 and put ,t to creedle and tried to Urgrade room but it gives error random positions etc. %54 or %89. ERROR 112
is my device dead???
Thanx you very much for helping me.
(Sorry About My English )

About my OS
i tried to upgrade XP Pro (SP2). Vista and Windows / is Not permission to upgrade...

if you're giving up, mail it to me. i should be able to tinker with it.

p3300 freezing

Hi people
my p3300 keeps freezing after a few seconds on booting, it gets stuck on the boot screen where it displays your spl and gsm versions, also when i put it into bootloader it freezes if im quick enough to attach the usb cable the screen fades away to nothing.
does anyone have an idea i have even tried hard resetting but it says "format failed"
here is my setup
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
my computer is win7 ultimate 32bit
any help will be appreciated

no help at all !
please guys

I have the exact same problem:
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
only exception is that mine agrees to hardreset ... "Format is complete"
I have replaced the battery with a new and charged it before trying to boot.
I can enter the bootloader (this 3 colored screen) but I'm not really sure on what is safe to do from there.
I would prefer to try and put a original ROM from htc.com on the device but they have removed p3300 rom's from the download page
I have not used the device for half a year or so... is it a y2k10 problem ?!

looks like I found the solution.
I managed to put a old rom onto the p3300 from my SDCard described here
wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing

[Q] Bricked Artemis - can enter bootloader

Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 300. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.

parizek said:
Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 260. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.
Click to expand...
Click to collapse
for SPL Artemis you can try this and to l his official ROM you can look at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Artemis​ but first try to him that your friend's device hardreset !! like this way :To perform a hard reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

thanks for ideas. HR cannot be made - returns error like "cannot format partition".
On the shipped ROMs site I cannot download anything - it only says something about redirection on ppc geeks
Here I attach the screen, what I get after trying to flash..

...
only the original rom will bring your device back to life.
whats your red numbers and letters at device start-up?

I can get only to bootloader, so the IPL : 1.14.0001 and SPL 1.14.0000 , that's all I can get

hmm, after a communication with official HTC servise in Czech Republic I got the number of original ROM and successfully downloaded it.
But still the same issue. Is it possible, that Bootloader is corrupted ? The guy told me that it is the only possible cause, if this ROM does not work

...
Try this original rom..
The bootloader of this rom matches yours..
(1.14.0000)
1. Put device into bootloader
2. Connect device to PC
3. Run the RUU
4(a). If this does not work, then you are stuck in the mud..
4(b). If that original rom does work, then click here for USPL 1.11.CMON
Good luck!
Rn

Hi,
thanks man for all the ideas. Unfortunately the ROM you are hyperlinkinkg I have already tried with no success. I have given it maximum, now I am giving it up.
Thanks for your patient help.
p

ME to in same problem plz help IPL 3.04.0001 and SPL 3.04.0000