Hi fellows,
I have PDA2K with WM6 from wiki, had set power on password , had to do hard reset(power + reset)
after trying few times my old password, it asked me to type a1c2.... , and now it is no more prompting for wrong password.
I had tried to place set to bootloader by (Record + power + reset) , (Camera + power+ reset)
and (Camera+ recorder + power +reset) but no luck.
have tried to delete hive by (reset and hold record + camera buttons) not much lucky .
can any one help me to get rid this password and make my phone functional
Regards,
Khurram
This Happened to me lastnight after puting in my sim card. After countless times of trying what you did I went on ahead and reloaded the OS. The funniest thing happened after reloading the OS the phone seemed to be alot faster than before. I have the SX66 (blueangel)
Related
i update wm6 but cant remember password is there away i can bypass the password option or reset it? on xda 2s
i have the same problem... my was was 1337.. and as secret question i had LEET ... so i could never mistake.. after 2 days 1337 wont work!
i need some help 2
i bet you guys changed battery without disabling the password check...
and havent read the forum for the same problems until now.
dont worry... i've been in the same situation...
Sad to say...
your password is LOST.
there are NO SOLUTIONS to revive your password.
but there are ways to save your storage data...
WARNING:
like i said it's sad to say because all your
customization will vanish alongside this procedure.
but you can still save some personal data.
SOLUTION:
press and hold the Camera + Record button
soft reset while holding them...
there will be a display of three items with a NO toggled default.
use the Camera button to toggle YES/NO
and use the record button to Cycle thru the menu list.
Hard Reset Using this option
1. - NO
2. - YES
3. - NO
option
this means you're just clearing up your registry
without touching your storage data.
then Press the Mail button
(second button from the left above your green key)
then if you booted the WM6 and inside it...
use some backup softwares to save your
data (SMS/Contacts/Emails/My Documents)
after you have backed up what you want backed up.
Hard Reset again then use NO/YES/YES or NO/NO/YES
to format your storage...
after the hard reset then reinstall everything again...
hope that helps.
Just to cofirm that the same thing happened to me shortly after upgrading to WM6. I was on a train on my way to a really important meeting.... Grrr.
I was just grateful for being able to save my data - the loss of cusomisations was the least of my worries!!
These days I don't password protect my device...
Friends,
I've just joined the forum. My HTC touch has just been locked itself and I can't unlock it because I didn't set a password. I still can receive calls but can't make calls, the screen is password screen, nothing else. I can't shut it down without removing the battery.
I tried PIN, PUK, IMEI, 0000, 1234, etc but didn't work. I tried soft reset but didn't help. Tried hard reset but it didn't reset. I tried the SIM card in other phones, it works, thus, the problem is the device.
Any help will be appreciated...
seckin38 said:
Friends,
I've just joined the forum. My HTC touch has just been locked itself and I can't unlock it because I didn't set a password. I still can receive calls but can't make calls, the screen is password screen, nothing else. I can't shut it down without removing the battery.
I tried PIN, PUK, IMEI, 0000, 1234, etc but didn't work. I tried soft reset but didn't help. Tried hard reset but it didn't reset. I tried the SIM card in other phones, it works, thus, the problem is the device.
Any help will be appreciated...
Click to expand...
Click to collapse
Flash new ROM
You want to double check about that hard reset. I think you've probably only done a soft reset. A hard reset will reset the machine back and wipe off ALL your data and settings, including the password.
The front screen password of which you are referring to NOT any of the ones you have listed, but instead it is something you would have set when setting up the device.
Have a try with some of your usual passwords
I have tried hard reset (pushing green and red buttons at the same time pushing the reset button with its own pen) but, didn't reset (since there appeared no message on the screen like "the data will be lost"). I think those two buttons are not functional because of password. Every time I tried hard reset it has done the soft one.
thanks anyway
Elwyn M3100 said:
You want to double check about that hard reset. I think you've probably only done a soft reset. A hard reset will reset the machine back and wipe off ALL your data and settings, including the password.
The front screen password of which you are referring to NOT any of the ones you have listed, but instead it is something you would have set when setting up the device.
Have a try with some of your usual passwords
Click to expand...
Click to collapse
seckin38 said:
I have tried hard reset (pushing green and red buttons at the same time pushing the reset button with its own pen) but, didn't reset (since there appeared no message on the screen like "the data will be lost"). I think those two buttons are not functional because of password. Every time I tried hard reset it has done the soft one.
thanks anyway
Click to expand...
Click to collapse
I'd suggest you query this in the HTC Touch forum rather than the General Forum for everything, as they have more intimate knowledge to help you
Hi there, my HTC touch just did the same today. I never set a password.
I contacted my IT guy and he mentioned the following:
Try number 1 once, and then tap unlock.
WORKED BRILLIANTLY!!
The HTC Touch does that all the time.
All you need to do is hold down the Send and End Call buttons down firmly and push the stylus up in the little hole near the usb port (Reset Button) and wait till the screen says that the phone is going to format and all data will be lost press the soft key to continue. Then when it says that press the center button and it will show Fat formatting and Rom formatting. This will erase all data on your touch so make sure you back up.
After turn on the phone and go through the set up and it should be perfectly ok.
You can do this for two reasons.
1. To reset the phone locks.
2. To repair the touch screen if it stops working.
Hope this helps. Enjoy
Dotybizz, I guess the O/P wanted a way to recover without wiping his data. However, due to the security reasons I'm sure you know about often that isn't a suitable option.
Not working
dotybizz said:
The HTC Touch does that all the time.
All you need to do is hold down the Send and End Call buttons down firmly and push the stylus up in the little hole near the usb port (Reset Button) and wait till the screen says that the phone is going to format and all data will be lost press the soft key to continue. Then when it says that press the center button and it will show Fat formatting and Rom formatting. This will erase all data on your touch so make sure you back up.
After turn on the phone and go through the set up and it should be perfectly ok.
You can do this for two reasons.
1. To reset the phone locks.
2. To repair the touch screen if it stops working.
Hope this helps. Enjoy
Click to expand...
Click to collapse
I tried but fails. Can you advice something more. I need it badly man.
solve = hard reset
for hard reset press volume down button + center button + red reset button
A Hard Reset restores the device to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
There are 2 ways to perform a Hard Reset on this device:
Menu path
* 1. From the Today Screen, go to Start>Settings.Select the System Tab and then tap on Clear Storage.
* 2. Enter in the password provided on the display of the device (should be 1234) and tap Yes.
* 3. The device will begin the Master Reset Process.
Keystroke Method
* 1. Power the device off.
* 2. Press and hold the Volume Down and Center Navigation Button at same time, do not release.
* 3. Press Power button and hold for a 3 count (quickly - say one thousand one, one thousand two, one thousand three). 1-2 seconds is too short, 4-5 seconds is too long.
* 4. The screen will instantly show the text to hard reset (this is a white screen with Blue text that provides the next steps to complete the Hard Reset. If you do not get this screen, power the device off and try again).
* o Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data is backed up before proceeding.
bombe1 said:
for hard reset press volume down button + center button + red reset button
Click to expand...
Click to collapse
knockout87 said:
A Hard Reset restores the device to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
Snip, Snip.
Click to expand...
Click to collapse
So both of you guys/girls are posting on a thread that has no had any activity on almost a year, eh?
my fd got a i780 in hong kong and try to put in chinese rom failed.anyone knows how to do hard reset with it?
and any rom with wm6.1 eng for i780 ?
Spoke to Samsung today .... and it would appear that the rumours are true and that no -one including Samsung know how to perform hard reset !!
They also confirmed they would not be able to flash update the ROM to UK version for me .... GREAT !!!
I have located a friendly forum member who has a UK working version and is happy to dump the ROM .... but we don't know how to ....
Can anyone help in a step by step approach to dumping ROM and then creating a flashable version I can use?
Any help from anyone Really gratefully received ....
This is too bad.....has anyone tried using a program for Safemode on this ppc?.....perhaps thats the only way to perform a hardreset for those that are stuck on the welcome screen.....because the safemode will kick in when the ppc detects resets in a loop and then thats when you're able to enter the ppc in safemode just like a normal pc......i guess from here you can either uninstall the program that was incompatible or go through start-setting etc etc-hard reset option......anyone here cares to try this and let us know which safemode program they are using and if it works?.....thanks
You can Install RealVGA, and then also the Language Pack.
So you can change the Language of your i780.
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
utp said:
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Click to expand...
Click to collapse
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
vittogn said:
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
Click to expand...
Click to collapse
No emergency mode does not give hard reset, it seems to be used for downloading ROM to flash using in OS Upgrade............
Should we start a trial and error method on the hard reset?
Update:
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
samueltlc said:
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
Click to expand...
Click to collapse
samueltc, tried, no luck.. it just soft reset the device...
utp said:
samueltc, tried, no luck.. it just soft reset the device...
Click to expand...
Click to collapse
Didn't work for me.
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
ekerbuddyeker said:
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
Click to expand...
Click to collapse
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
damn utp you're desparate XDDD
utp said:
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
Click to expand...
Click to collapse
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
Press and hold both the left and right softkeys.
While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
raiz07 said:
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
Press and hold both the left and right softkeys.
While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
Click to expand...
Click to collapse
just tried this....it doesn't work
irv777 said:
just tried this....it doesn't work
Click to expand...
Click to collapse
The search goes on...
So sorry to hear it doesn't work...
http://forum.xda-developers.com/showthread.php?t=370529&page=9
Should we start a trial and error method on the hard reset?
Update:
200803220357
Result: (No luck)
tried ALL combo of 3 to every keys.
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
in the web i find this ;
Samsung i607 Blackjack hard reset
Resetting your Phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the Phone
1. On the Home screen, press the Start soft key
2. Select Settings > More... > Security > More... >
Reset.
3. Enter the reset password and press the Done soft key.
The default password is 0000.
4. Press the Yes soft key to confirm. The phone resets and
reboots itself.
Ps. i don't have this device
Hello.
I'm trying to give my BA a hard reset.
Getting in the debuggers screen is no problem but leave it is a problem!
When i set the options right i have to push the mail button to leave the menu but nothing happened when i push this button.
How can i leave this menu and apply the hard reset ?
So for now i can't do anything with my phone because i have to give it a hard reset after upgrade to WM6.1.
Thanks.
Sorry this isn't a solution,but I can't hard reset with POWER+RESET,it just resets normally,but leaves all the rubbish on I'm trying to get rid of,so I would really like an alternative reset method.Help me too!
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
pixie67 said:
Just minutes later I found this,which formats BA:
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
I had to do this because POWER+RESET doesn't work on mine-hurrah,I am happy again!
Click to expand...
Click to collapse
my email botton is n't work tooooo
toooo bad!!!!!
I need to send my phone in for repair but want to factory reset it first.
LCD cracked after a drop so I can't see ANYTHING on the screen, this is what is happening when I try reset:
1. Remove & replace battery
2. Hold volume down, then press Power whilst holding
3. Four seconds later release volume down
4. Press volume down
5. Press power button (Phone then vibrates briefly)
6. Press Volume Up
7. Wait for reboot....
Problem is that the phone doesn't seem to reboot no matter how long I wait (I never hear the start-up sound/no buttons become active.)!
I have WaveSecure installed, so I did a remote Backup to check if the phone had been reset but it hadn't, I still had data on there!! I have no performed a Remote Wipe with WaveSecure but I don't know if it deletes things like Saved Passwords from the browser!
I'm running the stock HTC 2.1.
Any help is appreciated, I really need to get the hard reset working!
Thanks!
Got it working
Not sure what I did but I kept trying it over and over and when I booted the phone and tried phoning it I realised the ringtone was back to default, so I did eventually get the hard reset working!