Hi, all. I'm friendly user look for an dialer even it's not 3G, but also in 2G to make number changes on dialed numbers. I mean when I dial a number, in a case if I dialed wrong number to change the number on dialed one, not to dial again the correct one.
Sorry for bad english,
Thanks before.
winforall_xda-developers said:
Hi, all. I'm friendly user look for an dialer even it's not 3G, but also in 2G to make number changes on dialed numbers. I mean when I dial a number, in a case if I dialed wrong number to change the number on dialed one, not to dial again the correct one.
Sorry for bad english,
Thanks before.
Click to expand...
Click to collapse
Try the spencepu3 dialer here http://forum.xda-developers.com/showpost.php?p=2228386&postcount=1
it's amazing, flawless and beautiful (of course, it doesn't have video calling).
if you'd like to have smart_dialing , you must install his smart_dialing too.
have fun.
and your english is amusing to read
Related
Hye guys, I've searched everywhere looking for a way to actually change the speed dial number for voicemail.
Currently theres an entry as number 1 as Voicemail but there is no number attached to it. When I try and edit the number I'm not able to add an number, it has a drop down menu but it's blank and I cannot input a number into it.
I tried deleting the speed dial but then I'm unable to add a speed dial to number 1 as its reserved for voicemail...
I checked in Phone -> settings -> services and Voicemail and Text Messages has the right number for voicemail (121)
edit
using Black 2.0 with radio 1.38
thats because it hardcoded into the OS. the only thing you can do is set another speed dail number to your voicemails number and use that but 1 is always for voicemail sorry man
austinsnyc said:
thats because it hardcoded into the OS. the only thing you can do is set another speed dail number to your voicemails number and use that but 1 is always for voicemail sorry man
Click to expand...
Click to collapse
Nope not quite...
You can change it by going to settings-Phone-Services tab. It should be there with the Text MEssages Services Centre number.
I was able to edit mine when I tried YouMail. Not to mention how would these bad ass speedy cooked rom-a-lama-ding-dongs work?
X
xultar said:
Nope not quite...
You can change it by going to settings-Phone-Services tab. It should be there with the Text MEssages Services Centre number.
I was able to edit mine when I tried YouMail. Not to mention how would these bad ass speedy cooked rom-a-lama-ding-dongs work?
X
Click to expand...
Click to collapse
sorry your right forgot about that.
Hmm
Well in phone -> settings -> services -> tect messages and voicemail the right numbers are there but the voicemail just seems to be missing from the phone
I'll give it a hard reset and see how it goes
If there is nothing registered in speed dial position 1 from before, isn't it just to push the square nr. 1 and enter it from there?
edit: that is the square no. 1 in speed dial menu
Hi, all. Some days before I have posted one of my wishes that will be great if it's possibile - availablibility of change the wrong dialed number on it's self, not to dial again the correct number.
Now the second one - to group the dialed numbers by names. not in order of call. dialpads that we use let us see the last dialed number, in sub folder (when we enter that number) we see the same numbers dialed before.
Even without these improvements thanks to our developers.
Sorry for bad english,
Thanks for attention.
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
How does the phone know more than the number of the caller if not in contacts???
I was thinking of the way my landline phone (yes, I still have one of those, but I may be canning it soon) gets its Caller ID information. Verizon just sends it down the line to the phone. I thought T-Mobile did the same thing, the service just sends the necessary info down the line to the phone, but I thought that was a given (Caller ID) with wireless phone service. Maybe I'm mistaken, which maybe someone could clarify for me?
Now to me, what I'm getting seems like "partial" Caller ID, the number without the name? Or maybe I'm just totally confused on it all, been a rough week...
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
I didn't mean Verizon's wireless service, I meant their landline service.
Never mind, went over to T-Mobile, that's the way it's sent down, number only. Thanks.
darkfire62 said:
Hey folks,
I've searched the forum and Googled this issue, and I haven't seen it in quite this way, so I'm going to just ask it. And maybe this is is just a misunderstanding of how Caller ID works on the Excalibur, so please correct me if I am wrong:
My Caller ID works fine for those numbers that are in my Contact List, or course. By this, I mean I see both name and phone number. But for unknown numbers, I see just the number and no name. Which is annoying, to say the least.
I have noticed this more since I had to restore my Contacts a couple weeks ago, although I don't think that has anything to do with it. I see no Phone setting that affects this.
Okay, so the question is, is this the natural state of affairs for Caller ID in wm6.1? If the number is not in your contacts, you don't get full Caller ID? Or am I missing a setting or a registry entry or something?
DF
Click to expand...
Click to collapse
I thought I was having that Problem..
but im now having the problem with the Pictures not coming up.
tdavis75 said:
I have yet to see Caller ID show a name on a cell phone if it's not in your contacts. Verizon included.
Click to expand...
Click to collapse
In Canada Rogers offers this service. They call it Name Display
^^^^^^^^^^^yup dont forget fido too lol
Hi all,
I posted somethinig similar to this a while ago. I am using my Diamond to call VoIP numbers, i.e. call a landline then wait for a few seconds and enter the destination number followed by hash #. The landline number is the same for all destinations and only the second part differs, which is the destination number. The numbers look like:
0123456789, 00447890123456#
Now, if I store two or more such contacts in the address book, e.g.
Bar: 0123456789, 00441234567890#
Foo: 0123456789, 00447890123456#
Joe: 0123456789, 00445678901234#
the, regardless which one I call, say Foo, in the call log it will always list "Bar" as having been called. The same happens if I replace the comma with a "p". The number however is stored correctly, i.e. if I redial it, it will call the number for Foo which is what was dialed in the first place.
It appears as being a bug in WM6.1. I haven't tried WM6.5 (anyone?).
How in the world can I fix this?
Cheers for any help
foo? bar? linux-user? i google your text for translaiting but nothing understanding.
do you mean that the order is not correct?
(if you can give an example with more friendly-understanding/windows-user than you can get earlier response from other forum-users.)
hope, you not so much angry
okokur said:
(if you can give an example with more friendly-understanding/windows-user than you can get earlier response from other forum-users.)
Click to expand...
Click to collapse
I understood perfectly. Perhaps it is a english as a second language barrier. I will try to restate the issue. (I wish I knew the answer.)
When you have a extra long number stored to a contact (as you might when you dial a AT&T toll free number with some pauses, then a passcode, then a number.) And you have more than one contact stored with this long number... they all have the same first 10 or so numbers. So regardless of which one was called last, when you look up the call history log, it displays the first one.
It would appear the call history only looks at the first 10 or so digits to find a match.
misfitflt said:
I understood perfectly. Perhaps it is a english as a second language barrier. I will try to restate the issue. (I wish I knew the answer.)
When you have a extra long number stored to a contact (as you might when you dial a AT&T toll free number with some pauses, then a passcode, then a number.) And you have more than one contact stored with this long number... they all have the same first 10 or so numbers. So regardless of which one was called last, when you look up the call history log, it displays the first one.
It would appear the call history only looks at the first 10 or so digits to find a match.
Click to expand...
Click to collapse
if this is the case, you can use advanced config or diamond tweak (forgot which one had the option) and from there you can set how many numbers it should check
@misfitflt: Thanks for rephrasing the problem .. I was just about to post. Cheers!
Prewien said:
if this is the case, you can use advanced config or diamond tweak (forgot which one had the option) and from there you can set how many numbers it should check
Click to expand...
Click to collapse
I forgot to mention I already played with the number of trailing digits in AdvConfig (that's what apparently the option is called) ... I tried values from the default 6 to 20 and nothing changed. The buggy behaviour persists.
I recently tried a new dialer with address book application that replaces the TF3D dialer; it is called Inesoft Phone v4.5 (it's actually pretty cool). This one does differentiate between numbers with pauses or commas correctly!
I'll try switching off the dialer completely and use the built-in WM6.1 dialer to see if that works fine. If so then the bug is in TouchFlo (?).
Anyone knows of other good dialer software that I could try?
Cheers,
p.s. I'm surprised this hasn't surfaced until now though ... anyone out there with the same issue? Or maybe I need to give the thread a more appropriate title.
i have the same issue but learnt to live with it as i didnt want to shift to another dialer.
tried playing with the number in adv config but of no avail
lemme know if you find anything
I have a Verizon Note 4 (N910V) that I had unlocked a few weeks ago and am using it on T-Mobile. I'm having a few problems that are REALLY annoying.
1) I can not use the dialpad while in a call. For example, "Press 1 for English" I hit 1 and it does nothing. I've tried all the numbers with different 1-800 numbers and it just does not work.
2) My voicemail does not work. When I press 1 for voicemail, I get an error. I tried calling my number, but to enter my pin I need the dialpad to work. I tried YouMail, but that didn't work either. I never originally setup my T-Mobile voicemail so that could be why YouMail isn't working though.
Any help or suggestions would be appreciated. I'm pulling my hair out trying to google these problems.
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
lexbian said:
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
Click to expand...
Click to collapse
Thank you for the help. Your link actually fixed my dial pad while in calls. It suggested to change the DTMF to long instead of short and it now works. As for the voicemail thing, I got it to work sort of. If I dial 123, it works just fine now. The only thing is, I can't seem to change the speed dial of 1 to the number 123. I tried and it said it was changed, but it still shows *86. I tried a few times with the same results each time. Is there another step I'm missing?
I haven't had to do this kind of thing to any of my phones in years. I wish I could help better. I just happened to remember changing APN settings was necessary and found that thread.
Awesome that fixed the touchscreen issue too!
i can not change that number
@GamerGuy89: how can you make Verizon Note 4 work with T-mobile?
i put the T-mobile simcard on it and it say "Not verizon Simcard". Signal is 0. Please help me!
And even i add another APN, but i can not change the number of voice mail from *86 to 123.
Thank you so much.
hi all.
i don't know why after updated to 5.0.1, i can not type *#06# to check my IMEI. When i key in that code on my keypad, the phone still there, nothing pop-up.
did my phone failed Rom or system???
Any input will be appreciated!
Thanks