i have a pdal in italian language and i do a hard reset i'v got a screen or writing (tap the screen to set up windows mobile-based device)
typing is screen i got align screen (tape the target firmly and accurately at each will continuue to move until the screen is alined) and i'm dowing updat after clubimate in english but thers is always the problems and i got a screen it wrote : ipl r070308 cp n/a gsm n/a
what i gane do??? and i'm updat 2 or3 faith and nothing will change
sory for my bad english
serpentair said:
i have a pdal in italian language and i do a hard reset i'v got a screen or writing (tap the screen to set up windows mobile-based device)
typing is screen i got align screen (tape the target firmly and accurately at each will continuue to move until the screen is alined) and i'm dowing updat after clubimate in english but thers is always the problems and i got a screen it wrote : ipl r070308 cp n/a gsm n/a
what i gane do??? and i'm updat 2 or3 faith and nothing will change
sory for my bad english
Click to expand...
Click to collapse
You can flash it with a Upgraded WM6 English Rom, Which can be found in Thread...
Related
hi,
i have cracked and replaced my touchscreen. I have a lot of experience with solder, but my new touchscreen doesn't align after hard reset.
maybe have i to try with another rom ? now i have the follow windows mobile 3 rom:
R 1.13.00
G 1337.42
D 1.42.00 WWE
i have tried the aligment proedure about 18 times, but it doesn't align
help me please !!!
i have verified that pinout of the old touchscreen and the new one are the same, as specified in this topic
http://forum.xda-developers.com/showthread.php?t=272765&highlight=align
I have performed this verify looking the pin and the path made by white stripes along the glass.
Same path for all pins of old and new touchscreen.
so what's wrong with it ?
hi!
I'am a N00b of ppc (lol) ... but i'am looking for a wm 6.1 rom for the jama 101 ...
thanks
ps= sorry for my bad english
me too
me too need wm6.1 or higher for my i-mate jama101
The original rom is not even out yet. So any roms u will find wont be original and most propably cooked from other roms such as the i mate jama. I found one and when i installed it my phone went blank, nothing on the phone, only a white screen, and till now it cant be fixed. Dont try to look for any roms because the one u have is the best.
WARNING
100% I agree with you mr. Galiza 2days ago I bought a JAMA 101 and tried to update the virgin rom but 4 sorrow my GAMA 101 is dead right now because that updating and only white screen what I got from the ROM 6.1 I advice all who have a JAMA 101 to keep the virgin ROM and never try to update it. cuz you ll never back 2 the vigin again and you ll kill you device .
mr.Galiza if there any way to back my GAMA 101 2life plz tell me
thanx to all
sorry sir
I'm late and now my i-mate JAMA101 stuck in white screen
how can I fix this problem????thanx
imate jama 101 white screen
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
niflas said:
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
Click to expand...
Click to collapse
i need rom i have one phone only sho i mat
no rom is available for this poor device !
I search the net for hours and ... nothing !
I think we must Dump rom from our device and then cook it !
i-mate jama 101 rom problems
hey guys, i gues microsoft built in system in most of the pocked pc are uncorruptable. i am not sure if the builtin system of your pocket pc is corrupted or not. Here are some steps to update your device to the company built operating system.(note-system works only if builtin system is not corrupted)
1-remove battery
(note-betry should be charged,use master charger to charge if your pocked pc is not charging battery)
2-press and hold volume(-) button and red hangup button simultaneously,keep holding both keys and insert the battery.(note-dont unhold keys until the red led light on the top of the device is off)
3-tap decline on agreement statement(note-accept=arabic language instalment, decline=english language instalment)
After following these steps your pocket pc will as it was. for other manual instructions mail me to [email protected] .
sincerely k231.
I have I900XHHG4/AEHG4 and I would like just to change PDA part only from French to English. Furthermore I would like to make an image of my current ROM that I can restore in case of varranty issues (try to explain to French that their mobile speks English not very wise ).
How can I do it?
What is wrong
Step:
1. I am using GrandPrix like in attached picture.
2. I click Detect
3. I connect Omnia to USB
4. I reset omnia by clicking on the button reset
result: Omnia normaly loads and GrandPrix does not detect omnia.
What am I doing wrong?
interchange 3 & 4 but do it quick if you connect it past the samsung omnia splash screen it won't work.
Got it
I managed to get DXGH4 on my I900.
If it can help someone:
I did the procedure from above but I had to install win XP. First I used laptop with USB1.0 with Win XP and it didn't work.
hi
visit this website http://be.samsungmobile.com/FRA/supports/softwaremanuals/sof*tware.do and you'll find the language pack d'ont need to flash or upgrade it but you have to follow all the steps and becarefull when choosing language this pack contains french english and nederlands language .
Good luck
I have an omnia vodafone and i need the french language what do i do??
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]