anyone know why WMDC will not connect to my dash? i am running Kevava,s 6.1... for the last two weesk it has worked fine till i installed a Bluetooth USB for wireless sync. not sure if there is a setting i may have selected that prevents wired connection??
anyone????
Related
Gentlemen,
I need your help, just steps please how to connect ActiveSync 4.1 to O2 WM5 (Ivan's ROM). I have tried evrything and still can't get connection.
I can use wireless modem over BT (without setting any com port - kind of mistery for me!) and brows internet on my Laptop via PDA. But no luck with ActiveSync.
I'm lost and need very simple instructions what to do ) Thanks.
WM5 Does not support Wireless sync as MS$ have decided that this is a security issue.
truly, MS is a black magic.
somehow I did manage to establish activesync via BT, and sync my contacts. I think, trick was to activate BT discovery mode on PCat exact moment when activesync start searching on pda.
nevertheless it is running now on my desk.
COM said:
truly, MS is a black magic.
somehow I did manage to establish activesync via BT, and sync my contacts. I think, trick was to activate BT discovery mode on PCat exact moment when activesync start searching on pda.
nevertheless it is running now on my desk.
Click to expand...
Click to collapse
Sometimes it
MS only stopped sync over wifi, not BT.
bluetooh active sync
I found that I had to get my Bluesol working first (bluetooth hosting program) then I would start active sync on pc then start bluetooth manager on ppc then start active sync fron list of blue tooth short cuts this was after setting com ports on Bluesol it was a lot of mucking aroud to start with but once it was setup it connects fairly easily now hope this helps but it is important to set up a com port with bluesol first so that active sync can look for it then set up the same com port in active sync on the pc
Regards Ron
Hi Everyone.
Ive got my O2 XDA Orbit configured to sync my mail and Calendar etc from my Exchange Server at work. If I use GPRS or WIFI, this works a treat. However, I have a couple of locations where WIFI isnt available, but a USB connection to a PC is. Rather than setup a partnership at these places (I dont need to sync anything locally with the PCs), I want to use the internet connection on the PC to connect. Im sure that with my old EXEC, when I connected it to the USB port, it went right ahead and synced through the internet with Exchange, but this machine never seems to start doing so.
I have disabled partnerships on the PCs so that I dont have to click "Guest" each time I connect it. when the USB is connected, Activesync will not work at all on the Orbit.
I know youre all cleverer than me, does anyone know why this happens?
Steve
Hello,
I did a search and didnt find much, I also checked on Wiki and they explain how to use it as a modem via bluetooth dial up networking. I would like to use the bluetooth PAN feature in Internet Sharing but cant get it to work.
Firstly, I got the bluetooth dongle connected with the Bluetooth PAN. It tells me that they are connected and communicating with each other, the bluetooth software (bluesoleil) even provides me with an ip address, however when I try browsing on my laptop I get the message page cannot be displayed...
Can anyone please shed some light as to why it does not work?
Thanks a lot!
EDIT:
Seems like when the connection is established it gives the windows bluetooth adapter a weird ip address
like: 169.254.6.198
but I checked in network adapters of the 8525 everything is set for ip addresses to be assigned automatically .. strange..
in windows xp its also set to assign the ip address automatically :S
im not sure what else to do..
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Sleuth255 said:
Launch Internet Sharing on your Hermes & set the PC connection to bleutooth PAN. Now, make sure the Network Connection is set to your correct data connectiion and press connect. It should say "Waiting for connection" Next, connect your PC & Internet Sharing should show "Connected". If you still can't surf then its a bluetooth driver issue on your PC. The built in M$ bluetooth stack (XP SP2 & >)works correctly with bluetooth PAN for sure. YMMV on others. The latest Toshiba BT stack definitely works too (based on pesonal experience).
Click to expand...
Click to collapse
Hey,
Thats exactly what I did, and it gets connected on both ends..assigns a weird ip address.
I tried a few Roms, but now I am using urs the latest one dev 3.2
Always was a fan of your roms, but I cant get that bluetooth pan to work.
I also tried with WIDCOMM and Bluesoleil...
I get no where..
Anyone please??
Help!!
I guess I'll have to bump this thread to death in order to get some help !
man i had the same problem never got it figured out so if any one could help would be great
fb.knight said:
man i had the same problem never got it figured out so if any one could help would be great
Click to expand...
Click to collapse
Which bluetooth dongle you used...just curious?
Which chipset?
Ok, guys, got the problem resolved..it was the sucky bluetooth adapter from ebay "ISSC bluetooth adapter", piece of crap.. went to walmart got a usb 2.0 device for 25$ and all is well now.
Hi,
This is my first post, so I am not sure to post it in the right place.
I have just bought my Trinity and I have upgraded to WM6 (Faman 3.3). I have noticed that wifi connection is not available while connected to the PC via ActiveSync. Is that normal, or should I have to do something to correct that issue?
Thank you very much for your help!
I solved it! There's an option in the desktop Activesync settings to allow wifi to work together with activesync...
Has anyone got this to work. I got a bluetooth dongle for my laptop and although they see each other and I have the activesync set for bluetooth it says they are not connectted.
ANy thoughts would be great.