Related
Hi guys!
First of all my very atmost gratitude to all people bringing the right knowledge to this forum! It has given me a lot of ways to tweak and upgrade my MDA Pro (Universal). Thanks again. I upgraded my MDA pro in 30 minutes to the latest iMATE WWE + radio 1.04.02!!
Main benefits for me: built-in SKYPE (that works), Built-in Pocket MSN and NOT built-in, but working now: MS voice command (v1.5)
Since it took me a while collecting all relevant info for upgrading and tweaking my MDA pro, i wanted to share my experiences with you and let you know how i finally managed everything. Also because some posts contain outdated info about the upgrade process. So here we go:
UPDATE MDA PRO (NL) -> iMate Jasjar WWE + radio 1.04.02
----------------------------------------------------------------------
First of all get the right files from:
ftp://xdaupload:[email protected]/Universal
Get the files:
* JASJAR_WWE_11353_137_10301.exe
(from /Universal/Shipped%20ROM/JASJAR_WWE_11353_137_10301/)
and the file:
* UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
(from /Universal/)
- Unpack both files into a separate directory (use WINrar for both)
- Unplug universal (MDA pro) from USB
- In activesync, under connection settings, disable USB en COM connections
- Put MDA pro in bootloader by pressing LIGHT button + Power + RESET
(you can see USB vaguely on your screen, since you don't have backlight on)
- Connect MDA pro on USB; Windows will recognize new USB device
- Launch the file from the WWE update: MaUpgradeUt_noID.exe
- Preform the upgrade (this process takes about 15 to 20 minutes)
(I didnt get any country error here as some described earlier, it went smoothly)
- After it finishes, do not disconnect the MDA pro and DO NOT reset it. Immediately preform the next upgrade:
- Run MaUpgradeUt_noID.exe from the radio 1.04.02 directory
- This will take about 10-15 minutes
- After it finishes, disconnect from USB and give cold reset: POWER + reset
- You'll see the new iMATE splash screen, and then the Windows Mobile screen (first boot will take some time)
- Then the device will ask to first-setup and you're IN!
I did NOT have to install anything from the extended ROM, as others posted. The only thing i needed to do after upgrade was:
* Make new 'GPRS, 3G' connection for T-mobile, using the settings: APN: internet, user/pwd: tmobile
Then I deleted my old partnership on the ActiveSync, and activated USB and COM connections again, and synchronised my device! Et voila!!!
Then I installed my previous apps (see tip list on end of posting) and made the essential registry tweaks to my device, which can be found on:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Alrighty, hope this will bring the same smile to your face as it did on mine
Take care,
Guido
---------------------------------------
Some other tips I'd like to share:
* install Microsoft Portrait v2.3 for audio/video conferencing!! On GPRS is works better then skype for me! Audio is perfect, video connection (even at lowest settings) scrambles the audio a bit!
* Magic Button is top app!
* VNCviewer does a sweet job on the VGA screen (terminal services works fine too, but doesn't go fullscreen)
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Resco File explorer + Registry editor (must have!)
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Guido, execellent post!!!
---------------------------------------
Some other tips I'd like to share:
* of course Tomtom 5.1 + checkpoint 5.02 and/or POIedit
* Upgrading to Skype 1.2 beta did not work for me, stick to the default one!
Click to expand...
Click to collapse
Having a diferent build (please see below), I'm very much interested to see your tips on the above, TomTom (normal installation doesn' go...!?!) and skype (pre-installed in my JASJAR, but I haven't been able to have it working at all...!?!)
Thanks in advance.
_________________
BetoX
iMate JASJAR
ROM Version: 1.13.53 WWE
ROM Date: 23-09-2005
Radio version: 1.04.02 (AFTER MANUAL UPDATED)
Protocol Version: 42.36.P8
ExtROM version: 1.13.137 WWE (installed manually using Total Commander)
zeg.... ik kan de bestanden niet vinden op die ftp servers.
tempelier245 said:
zeg.... ik kan de bestanden niet vinden op die ftp servers.
Click to expand...
Click to collapse
Somebody has deleted all files in the upload section, now the most of the files are reposted again(thanx), i guess, their still are missing some shipped roms.
only rom their is for now; JASJAR_WWE_11353_137_10402.rar(if it is a full rom)
So think for now that you have to browse the ftp upload part.
ftp://xdaupload:[email protected]/Universal
simlock
hi
is the simlock from t-mobile removed after you did the update?
because you also updated the radio version........
ok please help, i cant use my MDA Pro cause i have Vodafone!
Thanks in advance
ROM uploaded / reply to questions
Hi guys,
I just read that someone cleared out some files in the upload dir!
So, as we speak the uploading of the JASJAR rom update is in progress. Should be in shipped rom any moment now.
For further replying on your msgs;
- Haven't checked if the unit is simlock free now, but I think i won't be.. I'll keep you posted.
- I read somewhere that Skype needs a minimum of 18MB program memory to run correctly. Right now I managed to get 21MB free, and everything works smoothly.
- TomTom had to be installed with the 4 cabs files, since the original setup didn't work for me (crashed in installer)
And once more; I really love how MS portrait is working for audio/video conferencing. Especially since of 15-11-2005 I'm using UMTS (!) on T-Mobile NL
Looking forward to your experiences.
Take care,
Guido
thanks guido.... how are you using umts on t-mobile ???
Is it possible to put back the original mda pro rom if something goes wrong... like a registry edit.... I don't really know how everything works and I don't want to destroy my new toy !!!
Reply / Exec ROM update / UMTS / Appz / Reg tweaks
Once you upgrade you go beyond the ** Point of no-return **
But sometimes you gotta take some risks in life to advance
Actually again I took the risk yesterday of trying out the XDA Exec ROM upgrade. And I must say; this one works pretty fine for me too. And right now I gained 22,35MB free RAM memeory, so I managed to get Skype 1.2 beta running!
Furthermore I'm test using the UMTS network of T-Mobile NL. I already clocked speeds up to 320 Kbps in the downstream; pretty neat Skype and Portrait work excellent on these new speeds.
And I've tested if the upgrade unlocked the device; but.... as I've expected: no....
For now I would suggest going for the O2 Exec upgrade, also since it has the 1.04.02 radio builtin. Things I like more about this upgrade:
- More FREE program memory (allowing skype 1.2 to run for example)
- Nicer SPLASH screen
- Seems to operate a bit faster
Once you installed the Exec ROM you can choose 'Install Type' under programs; this is where you select the Corporate Mode, and then give in the code 0506. (This wasn't really described clearly for me in the other posts). Then reset. Furthermore I deleted all other O2 stuff on the device (don't forget the shortcuts under Windows\StartUp). Actually I only left sddaemon in the startup group, giving me max of working RAM.
Thus, now running:
R 1.04.02
D 1.13.48
G 42.37.P8
installed appz:
- Skype 1.2 beta
- TomTom 5.1
- MS Portrait v2.3
- MS Voice Command v1.5
- Resco File Explorer
- Resco Registry Editor
- Magic Button
- Pocket Informant 2005
- Some small utils: 'Running Programs'/'Reset'/'CloseAll'/'TrayLaunch'
- Total Commander (only for vieweing Ext Rom)
and registry tweaks: (see my first post)
- GPS
- Fonts
- Bluetooth OBEX
- data connection always on
- soft buttons changed
- MS voice command for Bluetooth headset
- Glyph cache size
- Terminal Services cache size
- Homepage hardware button change
All works deliciously
cheers,
Guido
Reply / Exec ROM update
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
The ROM image that you are trying to use is not designed to work on your device.....
I have an MDA Pro.
Anyone have useful ideas?
Thanks in advance.
Greetz,
Ramoray
Re: Reply / Exec ROM update
ramoray said:
Hi,
I just took the risk to advance, however when upgrading to the XDA Exec ROM I got the message that (after doing the hardware inspectation):
ERROR 120: Country ID Error
Click to expand...
Click to collapse
I read this before in other posts. It seems that when you launch the updater the 2nd time, it doesn't produce the country error anymore
Hope this will be the same in your case!
And another important thing mentioned before; I used MaUpgradeUt_noID.exe (from the Jasjar file or Radio 1.04.02 file) to preform the upgrade. Just copy this file in the Exec directory and launch it; it will display another xda, but this is normal and will work fine for the universal
Good luck!
Cheers,
Guido
umts and simlock
Hi Guido,
thanks again for your cool posting every time! You keep us informed.
First off all pretty that the Simlock isn't removed after the update! I want to update too but first i want to remove my simlock. After that i will do an update and use my device just like i used mine Qtek 9090 before!
1 More question is about Tom Tom 5.1 when i try to install it i get an error is there an guide out there to install Tom Tom 5.1 on WM 5 ?
Ok thanks for now and keep us informed!
Surinamer!
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
upgrade MDA Pro rom
Hi Guido,
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Anyway thanks.
Greetz,
Ramoray
Re: upgrade MDA Pro rom
ramoray said:
Thanks for your useful info. The MaUpgradeUt_noID.exe did the job, my T-Mobile settings are gone now.
However I didn't had the time to do the XDA upgrade yet, but will do tonight.
Click to expand...
Click to collapse
Congratulations! Welcome to the other side
I'm curious what you'll think about the Exec in comparison to the Jasjar.
Keep us posted.
Cheers,
Guido
Update 21/11: Video calling is supported now; call T-Mobile NL helpdesk to activate it (see my further posting for other tips)
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test using it on T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
gnuijten said:
tempelier245 said:
Thanks guido.... I'll take the risk.... but how did you get the umts on your mda because the info I got said that umts on a t-mob network will be available from 2006
Click to expand...
Click to collapse
Will you go for the Exec or the Jasjar upgrade?
Concerning UMTS; I'm test/beta using it for T-Mobile NL. Officially it will be launched in 2006. I'll keep you informed about the progress.
Video Calling isn't yet supported on the MDA, but the data connection is! Topping at 340 Kbps, which is pretty fast for a mobile device
Cheers,
Guido
Click to expand...
Click to collapse
Hi There,
From today i noticed that I have an UMTS connection on my MDA PRO. I have flashed my MDA pro with anouther rom. UMTS is working fine. Making a videocall is not successfull. Do you have any tips to make it work or is it not supported by T-mobile
Qtek 9000 error and upgrade to imate latest firmware?
Hi,
Have been reading through all of your responses. Very impressive.
Today i received my Qtek 9000.
It seems to be a wonderful phone and with the subscriptions vodafone has in sweden i get free calls and free downloads. Looked great.
Now to my problem.
I´ve put in all settings that vodafone provides for other ppc´s and it´s working on them.
It connects, dissapears, connects again.
And i get:
Cannot Connect:
Dialed: services.vodafone.net
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer´s documentation and try again.
I´ve downloaded these 2 files:
JASJAR_WWE_11353_137_10301.exe
UNIVERSAL - JASJAR - Radio Version 1.04.02.rar
Will an upgrade remove my problem?
But my question is, i bought it at expansys, why buy qtek if i could have bought an iMate instead? I mean will i now rebrand it to be an imate?
Are there no software updates from qtek?
Since this one is brand new, should i return it and get an iMate instead?
I will also need to get the regfix for swedish keyboard, would be entirely greatful if it could be arranged.
Very first message from a brand new forum member!
Best regards,
Daniel Eriksson
Guido,
Is it possible for me to get acces to the umts from t-mobile.. Furthermore I'm thinking that I will install the exec rom on my mda pro. I'll receive my device tomorrow so I'll see. Do you think its a good purchase ??
Thanks
guido.... btw ik snap echt geen f*ck van dat editen van je registry.... kan je me misschien in het nederlands uitleggen wat het inhoud/betekent ?
Hi there. I've just acquired an XDA Exec (finally!) and I've got a question. My Exec has arrived with the 1.13.82 WWE ROM installed on it, dated 30/11/05. The last ROM that O2 have published on my-xda.com is 1.13.188. Higher version number = better ROM right? So I should just stick with the ROM version that came on the device and not overwrite it with the one on O2's website, correct?
Problem is, I can't install the GPRS Monitor program that came with it. When I try installing it via ActiveSync (I'm running v4.1) it gives the following error message:
"Unable to install application. Please update your device ROM to the required version before trying again."
So what should I do? Is there a way of fixing this and installing the program without installing the ROM from O2's website? Any help would be much appreciated! Thanks,
Mach
If you go to | Start (menu) | Settings | System (tab) | About (icon) | you should see something like "Windows Mobile Version 5.0 OS 5.1.195 (build 148xx.x.x.x) Can you post what your says?
Thanks;
Sure. It reads as follows:
OS 5.1.1700 (Build 14354.0.1.1)
Does that help?
Mach
Mach said:
Hi there. I've just acquired an XDA Exec (finally!) and I've got a question. My Exec has arrived with the 1.13.82 WWE ROM installed on it, dated 30/11/05. The last ROM that O2 have published on my-xda.com is 1.13.188. Higher version number = better ROM right? So I should just stick with the ROM version that came on the device and not overwrite it with the one on O2's website, correct?
Mach
Click to expand...
Click to collapse
You are running the same rom thats on the o2 site. Check your version again and you should see you have rom 1.13.82 and extended rom 1.13.188
There is an acknowledged fault with the CD version of GPRS Monitor. If you download the 'app suite' from the o2 site it should install ok. You can get it from the same page that the rom is available to download.
Thanks for replying again, but unfortunately I'm getting the error with both the CD version and the version from the website. Any other ideas? (hopefully not a hard reset)
Mach
1. Run the website version again and you should get the options to 'modify, repair or remove'.
2. Choose the option to remove.
3. Run the website version again and this time it should just install.
Hi,
I got my MDA Pro last week, there was some weird problems with it where it would drop the signal rate everytime someone called.
When I called T-Mobile I was told I should update it, which I did...then MMS functionallity disapeared etc..
So my question now is, which ROM is the best to use with it...and where can I find it?
Cheers.
Hi Jeuk,
I followed the t-mobile site and downloaded the update (it ends up coming from some t-mobile subdomain on 3rd part site, can't remember the URL, sorry, but hunt around)
I've found it great, fast and stable (as long as you reset when it says it's installing the customisations - you can pick and choose the cabs you install, i'd recommend the mms/gprs settings more than anything else - search on here for the t-mobile cabs, or get the extended storage unlocker and install from there using total commander (also search here for these things - this site is a great resource). You don't see many complaints from t-mobile users here, I suspect they've actually pulled out all the stops and been one of the most reliable resellers of this phones.
but my GPRS is great, coverage is fantastic, bluetooth profiles all in there (including a2dp [sp?]) for bluetooth stereo with a moto hs820), fast running, few resets. All I have of the t-mobile branding is the awful colours on the case of the device. that horrible pink-tinged plastic down the button strip. really. I mean, really.
maybe I should add:
ROM: 1.20.32 WWE
ROM date: 11/16/05
Radio: 1.06.00
Proto: 42.40.P8
ExtROM: (I erased the extended rom.. crazy radical reinterpretation of READ-ONLY HTC)
d
Would you like to help me build a single CAB file for T-mobile settings?
I would like to take a stock WM5 install, and then include the Qtek dialer and T-mobile settings.
This should provide a very clean build. :idea:
Anyone who knows how to build a settings CAB file, your input would be greatly received!!
Latest TMobile ROM
In the latest TMobile ExtROM has anyone done a breakdown of what each of the CAB files does? ESpecially interested in those that configure the MMS settings and GPRS
Thanks
Re: Latest TMobile ROM
I found the thread that describe the cabs in the 1.12.126 rom, here :
http://forum.xda-developers.com/viewtopic.php?t=32839
i'd imagine most of the names and descriptions are the same.
hth
d
Hi,
Thanks for all the replies, still having problems after the "latest greatest" update. I got the update from http://t-mobile.iris-global.com/
The MDA still hangs up on 80% of the calls, especially if you spin the screen before answering.
ROM version: 1.30.114 WWE
ROM date: 04/13/06
Radio Version: 1.10.03
Protocol Version: 42.44.P8
ExtRom Version: 1.30.232 WWE
Cheers
I have recently upgrade my X01HT to WM6... tried both the latest release of Pro Black 2.0 and LVSW... Both were excellent! However, I ran into problem with 3G/HSDPA connection and when viewing my local provider's portal... I am living in HK and while I was on the old Dopod HK WM5 Rom, I was able view the provider's (Smart-tone) portal w/o scrolling left & right. As well, the link for streaming contents are visible. While I am connected to the portal, the connection will drop but automatically re-connect... Have applied the HK Network Wizard extracted from the WM5 ROM and all network settings were applied successfully.
I have read PAPPL's post about browser.dll, http://forum.xda-developers.com/showthread.php?p=1198850#post1198850... Still not able to get what I used to see on WM5 Rom.
Please shed some light on how the providers usually detect the model of the device and it's capability? I suspect my provider is unable to identify my device and thus failed to adjust it's content to fit the screen, as well as to display the streaming content...
Any suggestions/comments would be highly appreciated!
***************
ROM: Pro Black 2.0
Radio: 1.38.00.10
Protocol: 32.71.7020.12W
ccanddl said:
I have recently upgrade my X01HT to WM6... tried both the latest release of Pro Black 2.0 and LVSW... Both were excellent! However, I ran into problem with 3G/HSDPA connection and when viewing my local provider's portal... I am living in HK and while I was on the old Dopod HK WM5 Rom, I was able view the provider's (Smart-tone) portal w/o scrolling left & right. As well, the link for streaming contents are visible. While I am connected to the portal, the connection will drop but automatically re-connect... Have applied the HK Network Wizard extracted from the WM5 ROM and all network settings were applied successfully.
I have read PAPPL's post about browser.dll, http://forum.xda-developers.com/showthread.php?p=1198850#post1198850... Still not able to get what I used to see on WM5 Rom.
Please shed some light on how the providers usually detect the model of the device and it's capability? I suspect my provider is unable to identify my device and thus failed to adjust it's content to fit the screen, as well as to display the streaming content...
Any suggestions/comments would be highly appreciated!
***************
ROM: Pro Black 2.0
Radio: 1.38.00.10
Protocol: 32.71.7020.12W
Click to expand...
Click to collapse
Generally the pages use the string returned by the browser to determine what it can do....i THINK it returns Mozilla4.0 or something along them lines when you can view pages with images etc....
I havent tried the browser.dll thing to see if it works as i cna still only see the text version of the O2 portal here in UK.
Prior to updating to AKU3.3 (then later WM6) it worked nicely.
Thanks, mrvanx... Your documentations are excellent... Thumbs up for YOU!
What I can do is to downgrade back to WM5 and pull the corresponding registry entry.... only concern is, if the upgraded IE Mobile version? within WM6 may have anything to do with that... struggling...
ccanddl said:
Thanks, mrvanx... Your documentations are excellent... Thumbs up for YOU!
What I can do is to downgrade back to WM5 and pull the corresponding registry entry.... only concern is, if the upgraded IE Mobile version? within WM6 may have anything to do with that... struggling...
Click to expand...
Click to collapse
the reg entry hack doesnt work from AKU3.3 onwards
from what ive read its returned using browser.dll in later versions
mrvanx, wonder if the browser.dll from WM5 (the version that used to work) would help with proper screen formatting on WM6? I have tired to pull a copy from another device running WM5 but it's locked... As well, the file is named something different, like browser.86.dll... Is there a way to extract the copy? Thanks in advance...
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....
gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.
Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg
I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html
I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!
new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html
Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6
Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help
Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!
I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!
There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.
Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance
This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.