my blue angel is upgraded to wm6 and used for around 6months, and now it gets locked on the startup.. and i tried so much to perfom a Hard-Reset .. but no combinations work.. can anyone pls tell me how to erase all memory of this? thnxx
I have the same problem,
After uninstalling spb pocket plus
my startup pin doenst not longer work.
I think the only thing to resolve this is to "Format" The "BA"
can someone tell me to how to do that?
Thanks
Thijs,
A hard reset is the closest thing to a 'nuke and repave' on a phone.
If you want to be very paranoid about it, reflash the ROM's then do a hard reset... twice.
Related
Hi,
Just got a shiny new Orbit and I'll be installing WM6 ASAP but meantime I just want to get rid of the O2 rubbish.
Hard-resetting the phone and formating results in the phone re-installing but the "Corporate Install" option never appears.
What am I doing wrong?
Thanks
N
They got rid of that.
Hard reset, then when you get the message "Customising in 3 seconds" soft reset again before it starts.
You'll need to enter the GPRS and MMS settings manually, although I think there is a .cab file of them floating around here somewhere.
Thanks. I'll give that a try and report back.
N
ntblade said:
Hi,
Just got a shiny new Orbit and I'll be installing WM6 ASAP but meantime I just want to get rid of the O2 rubbish.
Hard-resetting the phone and formating results in the phone re-installing but the "Corporate Install" option never appears.
What am I doing wrong?
Thanks
N
Click to expand...
Click to collapse
Where did you get WM6 for the Orbit? Me want..........
search this forum...many available...PDA Viet, Bepe, even Dopod 800...!!! the curry's hot take your pick pal !
smfa1965 said:
Where did you get WM6 for the Orbit? Me want..........
Click to expand...
Click to collapse
Or wait a week or two for O2s official offering.
Hi guys, I've read and used the forum for years and upgraded my Cingular 8525 a ton without troubles (followed Vanx's method for vista and for upgrading), but this is the first time I'm really stuck without a clue.
I had Schaps latest OS on my phone working fine for about three days. It was charging with the USB hook up to my Computer. I pulled the USB out and the phone entered bootloader. I couldn't get it out. I tried using mtty to no avail, hard reset ect., but finally used the SD loading method to put TNT's latest on it (don't know why this worked). Here's the thing though, the phone will load fine on first load after I flash, but if I soft reset or turn the phone off and on it goes right into bootloader mode. The only way I can get it to load up again is to connect it to the computer's USB, take out the battery and then put it back in. the OS then boots up without fail.
I have read a ton and searched on the forum, and if any of you can help me understand what the hell I can do to fix my phone I would really appreciate it. I will post anymore info you guys would like, I really need your help on this one.
Thank you so much!
Hi,
I posted exactly the same problem today ! here:
http://forum.xda-developers.com/showthread.php?t=381284
It's really strange !
Dave
I've been reading everything and it appears that Schaps's new version seems to have this problem sometimes....I have the exact same problem as everyone else (mtty gives me the same results), and flashing a new rom doesn't get rid of it....I hope there is some way to fix this!
maybe I'll try flashing a new radio and see if that helps things....
I did notice that flashing Schaps 4.31 seems to include radio 1.50 and I had changed my anyway to 1.43 as I thought that was better for my area.
Not sure a radio will help. Maybe a different ROM version will ? Maybe 3.54 ?
I have flashed TNT's rom as well and it still has the problem now....I'm flashing a new radio as I type, I'm going to have to reflash the OS too, it just got stuck again as it was restarting.
Just a quick thing, I think I have solved my problem (not sure if it is permanent) by powering the phone off and on. Not resetting, just a simple power off. I spoke to a colleague who said the way it shuts down is different to soft reset (makes sense) and I haven't powered my phone off properly for a long time.
I have tried soft reset a couple of times since doing this and it hasn't gone to the bootloader screen once.
Maybe this is the simple fix.
I will keep you posted.
try to flash OFFICIAL ROM first , maybe there are few bug / missing file when error appear while flashing other ROM.
I hope it will help you both.
rgds,
ermen
Use mtty to see if yo have any bad blocks... I've had a few problems the same as yours and found I had 1 or 2 extra bad blocks, after the 2 "factory standard" bad blocks I got on my jasjam of course. hope this helps...
My fix didn't work.
Not sure what I am suppossed to see when I run "task 2a".
Has anyone had any luck fixing this ?
Hi All,
first of all... if this question is being asked at the wrong place.. please let me know ;-)
Well.. i have a question.. I have a daxian x999 and want to upgrade the OS.. The OS on this device isn't fast and can be quite unstable sometimes..
anyone can tell me how i can upgrade this device?? I'm a complete newbie on this one.. so any help would be appreciated..
thanks!!!
no one has a clue??
Rom
hi there!
the problem with the daxian x999 is, that until now no one managed to extract the bootloader!
i tried almost every software i found here... no success!
i was able to extract the rom, but that doesn´t help too much
and another thing that is very sad, is that no one from the "knowing Guys" here is interested in helping us!!!
there was just one senior member trying to help me... (thanx again the_eqionoxe!!!)
i expected some more help from a forum with that much experience...
regards
chuckbert
You say you were able to extract the rom, please share how you did this ....
i was able to extract the rom, but that doesn´t help too much
Click to expand...
Click to collapse
Thanks
Sorry i found it in the very next search
As far as I know it should be presented in the form of a imgfs file (can be cooked by any kitchen). (*but I am not 100 % shure, I don't have a daxian to experiment with)
But I am unaware about the XIP format .
If we had a look @ a original update.img then we could say how it was compiled, and hopefully port other rom's to it.
any have yep put 6.1 on this phone?
I have a daxian x999 but its in chinese & if i cant get it exchanged will want to change the windows rom to an english one - cant find the english rom though (& need to learn how to do it too lol)
I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know.
"I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know."
Have u tried a soft reset?????? or maybe a "master clean up" as it is called on the phone???
also if someone here is going deep into the phone, can some1 figure out how to 'manage' the accelerometer for the current application/settings of it seem pretty dull... i don't know if it helps, but the process which rotates the screen is called acc_ap and you can find it in the start up folder
Yes, I tried the soft reset, memory clear, and hard 3-button reset, no joy.
nobody tried with pdocwrite as MUN_rus has done with HTC wizard G4??
WARNING This device needs OTHER drivers than a HTC ELF(in), so make sure you cook a ROM with the proper drivers!!.
You can probably dump the rom by the reverse command pdocread..
Haven't tried it myself, as I have stated before, I have no daxian 999 to experiment with myself..
hii
i got the following problem: i usually uses a custom rom but now i got a stock rom. i flashed 7 roms last 2 days for the following reason: after i installed a rom (i have hard spl1.40) the rom works perfectly but when i go and install my cabs theres gonna be a problem: the cab will install, i can play around for some 15 minutes with my diamond and then the phone freezes and i need to do a soft reset. NOW the diamond stuck at the diamond screen with red letters. i can do a hard reset etc. but this is very annoying!! please help me! it happenend with ezinput cab too. i dont know why it happens!! heeeeeelp xD!
EDIT: the small cabs from small size works perfectly but it are mostly big cabs like ezinput etc..
sounds like your device in in desperate need of this:
http://forum.xda-developers.com/showthread.php?t=540290&highlight=mtty
If you perform mtty (which is basically a format tool) before flashing any rom most of this weird problems disappear.
but i dont understand mtty its sooo hard.
and it even happens with an stock rom (official)
isnt that weird?
i was very resistent to use mtty too, cuz i thought it was so complicated i couldn't get my head around it. But after i had to give it a try (i screwed up someone elses diamond very bad ), i found out it wasn't as hard as i thought, just read carefully and keep in mind that it is only a tool to format your device so you can perform a fresh install on it (in puter terms...format C drive and install Windows).
Mtty even reports back that it tries to erase bad blocks, just like checkdisk from Windows does
The fact that it happens now with a stock rom is not that weird, cuz your 'Cdrive' is 'outta shape' (cuz of flashing different roms of different sizes taking up different spaces)., and really needs to be formatted.
Give it a go...your device is practically useless now to so whata you gotta loose...lol...no, sorry just a joke!
heey man. i did mtty and it was sooo easy eheh. i did it.
i finished all the mtty stuff and i flashed a new rom.
i am now going to install all my cabs xD.
But what do i have to do if it didnt worked?
i just flashed this rom: http://forum.xda-developers.com/showthread.php?t=506533
did someone used it too?
gave it problems??
thanks nirak
EDIT: I THINK ITS SOLVED!! BUT IM NOT SURE YET! if there is appearing a problem again i wil post it here!!
THANKS TO NIRAK AND MYSTICGENIUS FOR THE MTTY **** xD
PS: Nirak can i have your msn? im dutch too^^
hehe...glad it worked out!
well, at first glance the bug report of this rom looks very promising , haven't had this one on my diamond, but makereval is an old (as in experienced) cook, so i wouldn't worry to much.
btw...if mtty would have given an error this community would have helped you out, esp MysticGenius (owner of mtty thread) is the 'god of mtty' and always willing to help if you get stuck.
Nevertheless there's always a small change that we (as in noobs...lol...) brick our device so we have to send it to diamonds heaven...but he...what's life without a thrill every now and then
hehe ok,
can i have your msn?^^
Hi everybody some days I've a problem with Rhodium and cooked Roms. This happens: when rhodium is in stand by (screen off) and I press the power button to turn on nothing happens... everything is turned off and rhodium isn't working and not sync to WMDC.
I did this:
1- put back originale WM 6.1 = device works fine and syncronizes
2- put back Original WM 6.5 = everything is fine here too
3- replace a cooked Rom ( already tested last week, fine) and returns the same problem, when the device goes in stand by not turn on and not syncornizes.
I tried several cooked Roms but everyone has this problem and didn't work...
no one has had the same problem???
Anyone can help me???
Thanks in advance
Fabrizio
Could be some program or the specific cooked rom youre using. Did you do a HARD RESET after flash? That could help... There is much talk about the notorious BSOD (blank screen of death) at XDA... Search...
Loco5150 said:
Could be some program or the specific cooked rom youre using. Did you do a HARD RESET after flash? That could help... There is much talk about the notorious BSOD (blank screen of death) at XDA... Search...
Click to expand...
Click to collapse
thanks Loco, question is that rom I've already used without problems, now I search, I thought to use SEARCH but I didn't know how to call this problem in English (really not even in Italian)
Yes I mad SR and HR after flash...
then its probably some program you have installed causing problems with the specific rom.
Loco5150 said:
then its probably some program you have installed causing problems with the specific rom.
Click to expand...
Click to collapse
no I have not install any program after flash I syncro immediately my rhodium but it isn't work (now I have flash a cooked rom and the problem back again)... mah I don't understand because does it
Problem remains
anyone has another solution?
SOLVED
ok I solved the problem, was microsd create a conflict with device... when I flash ROM I work without SIM and Micro then I put they and then syncro with pc. and wmdc doesn't work, I formatted micro and now it's all ok.
maybe it can serve to other people...
I'm sorry if this post is useless...
thanks for help