Related
I'm looking for the registry entries for the microsoft bluetooth stack on a ppc2003se device and maybe the bt dlls in the windows directory. I downloaded a imate jam rom, but I can't figure out how to extract the information I need from it If someone could provide me with a copy of their registry entries (i think all the important ones are stored at HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\), I would greatly appreciate it. Thank you for your time!
Jason
P.S. In case you are wondering, I'm trying to restore full bluetooth functionality to my crippled samsung i730 verizon phone (mostly I want the DUN profile). It uses the ms stack and the main (only?) problem appears to be that some of the registry entries have been removed. If I can compare my registry entries to working entries, I'm hoping I can find the solution!
you can extract all files from ROM with dumprom tool, then convert default.fdf to defailt.reg with fdf2reg.pl script.
The BT DLLs from jam's rom would be useless for you - they are XIP.
Thanks for the info on the dlls, i didnt know what arcitecture the jam used. As for the dumprom tool, I tried it multiples times in different configurations to no success (nk.nbf, nk.nba, different passwords). The rom I grabbed was 1.12 from the "How to upgrade with the latest I-mate Jam ROM --GUIDE--" thread. any suggestions for one that will work?
Hello,
I've just received my SPV M5000 and I'm loving it. However I do have a few niggles. Freezing, took ages to get skype to work, unable to install Tom Tom navigator 5.0.
I've heard that the imate Jasjar ROM is more reliable than Orange ROM.
Any information on the following questions would be much appreciated.
Does the imate ROM contain skype?
Where abouts can I locate the imate ROM?
How do install the ROM?
Can Tom Tom navigator run on the device?
Thanks in advance.
TomTom runs on the orange ROM. Its the installation that has problems, and that is to do with the installation package not liking WM5/Activesync 4
You can install TTN by copying over the 5 cab files manually and running them on the device, you will also want to find the 5.1 update cab.
If you do a search you will find the cab, and the information on this board. It took me 15 mins all in.
I know it doesn't answer your question, but might save you turning your phone into a brick!!
Also, are you on orange? If so, how the hell are you going to afford to use skype after the 3months 3g trial ends? :wink: :lol:
Thanks for that.
In response to your question. I won't really be using Skype over 3g. I will only use within Wireless Haotspots using WiFi.
As I am a complete thicky, would you be able to spoon feed me the installation of Tom Tom to my Universal. Where to install, what, etc and the upgrade?
Thanks in advance.
toptaggy,
I'm an irregular poster on here but found myself in the position of having a genuine registered copy of TomTom Navigator 5 and unable to use it on my M5000 having just upgraded from the M1000 and M2000.
Elsewhere on this forum, I found thie following which is a very helpful guide to installing TTN5 with Bluetooth GPS.
Hope it works for you too.
F
TomTom
There are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hi toptaggy
So far I was never happy with Orange ROMs. But I have a suggestion for you as long a realy good ROM is not avalable.
I installed the VGA tool. With this one the screen is much faster, specialy when turning the screen.
Than with the Total Commander CE the extended ROM is visible (just tip in the adress bar: Extended_ROM ). Here you can fist backup it and than remove unneccessary file as Orange ring tones etc. This will free up you some memory.
With this config my M5000 is working 50% faster as the standard out of the box.
A pitty is that the slider in the memory setting is missing as you had it in W2003 SE.
Cheers
What is the VGA tool and where can it be obtained from ???
agga said:
Hi toptaggy
So far I was never happy with Orange ROMs. But I have a suggestion for you as long a realy good ROM is not avalable.
I installed the VGA tool. With this one the screen is much faster, specialy when turning the screen.
Cheers
Click to expand...
Click to collapse
Hi dfens
as all other do it xda ftp - universal folder, there I found it.
Sorry, I don't have the exact link as I'm on holiday.
cheers
Hi
I've spent the past few days geeking with my MDA, using the wealth of info from this forum.
I tried the JasJar rom (too much [email protected]), and ended up with:
- XDA CE Rom (1.13.48 )
- Radio From O2 Rom (1.04.02)
- Minimal Stuff from XDA/MDA ext roms
Goal was to install with the least [email protected] possible.
Step 1 - Flashing The XDA Exec Roms
First flash with O2 XDA Rom, using the info available here: http://forum.xda-developers.com/viewtopic.php?t=32725
To sumarise the above...
- Get XDA rom from:
ftp://xda:[email protected]/Uploads/Universal/Shipped ROM/Xda_Exec_LaunchROM_v113139.exe
- Unpack the above using winrar.
- Plonk MaUpgradeUt_noID.exe in the folder where you unpacked the O2 rom (you can get this file from the ftp site, in the file: ftp://xda:[email protected]/Uploads/Universal/JASJAR_WWE_11353_137_10402.rar
You only need the one file!
- Disable activesync
- Put MDA in bootloader mode
- Connect to PC via USB, wait for hardware detection
- Run the file MaUpgradeUt_noID.exe from the O2 Rom directory on the PC
- Wait ;-)
- Once it restarts, do the usual CE setup, but do not let the extended rom install (simply soft reset at the prompt). If you have gotten past this stage, just hard reset again, and do the soft reset at the correct point!
Step 2 - Installing Progs From Extended Rom
- You'll now have an MDA with the XDA CE and Radio roms installed. It will need the appropriate patches installing from the XDA and MDA extended roms.
- To start, DL both extended roms:
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
- For info on what each of these roms contain, look at the following threads:
MDA: http://forum.xda-developers.com/viewtopic.php?t=32839
XDA: http://forum.xda-developers.com/viewtopic.php?t=32527
- You dont need all that ****e, I installed the following:
XDA:
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB (bluetooth patch)
MDA:
CAB-Customization-TMUK-Universal-01-03-04Aug05.CAB (Adds MMS Server Settings)
CAB-Shorcut-TMOENU-08Aug05.CAB (Adds MMS to outlook + installs some shortcuts which you can remove later)
Enable_VT_RTPlugin_0727_2_signed.CAB (Enables Video Calling)
Signed_UNI_TMO_Connection_112100.CAB (Adds 'T-Mobile Internet' and 'T-Mobile Internet CS' for GPRS/3G connection)
Stage 3 - Cleanup
- The CAB CAB-Shorcut-TMOENU-08Aug05.CAB also installs a links. If you dont install the cab TMO_UK_UI_0727_signed.CAB then these will be dead llinks. The 'clearvue pdf' reader is a part of this cab (but if you install it, you'll get all the other sh1te it contains also. I was not interested in the PDF reader, so I just trashed the dead links.
- There are two dead links in Programs (they'll be obvous by their icons. I seem to remember them being 'clearvue PDF' and 'EmailWiz' In Explorer, browse to /windows/start menu/programs and trash them.
- Several shortcuts are installed in /windows/startup. Trash the elatepushservice (I dont know what this does, but I dont appear to be missing anything!), sddeamon (this causes the prompt 'view pics on card' when you insert a card containing jpgs from digicam etc). DONT trash 'poutlook' as otherwise the MMS folders wont appear in pocket outlook.
- Install Pocket Mechanic, and use it to ditch bad registy keys and cleanup the notification que.
- Could also install the ext rom unlocker & Total Commander so that you can shove only the cabs you want into the ext rom (or use the space for somet more useful) See Here: http://forum.xda-developers.com/viewtopic.php?t=33638 (Cheers Buzz!)
Registry Hacks
Goto: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry and pick some registry hacks to install. I did 'keys on today screen', 'disable start menu animation', 'change pocket ie', 'change fonts', 'change glyph cache' and 'change web hardware button' - to 'about:blank'
Goto:
http://forum.xda-developers.com/viewtopic.php?t=33515 and make the suggested changes to the cache settings. I found that this did speed stuff up, but since its only cache settings, it will only speed up stuff the second time you try and do it!
Soft Reset
Install Your Progs
I installed
In Internal Mem
Resco Explorer (+regedit +ftp) to replace the MS sh1te
Resco Pic Viewer (to replace the MS App)
Pocket Informant (case the built in stuff is useless)
Resco Audio Recorder
Resco Pocket Radio
TCMP Media player
Net Remote (to control my HTPC)
SPB GPRS Monitor (from MDA CDROM)
Zimmermann Pocket Hosts (essential for VPN use)
Small menu (so I can ruddy well close open apps!)
IPConfig
Pocket Putty (SSH)
On CF Card
Total Commander (to get to the ext rom)
WiFiFoFum (for free email on the move ;-)
Pocket Mechanic
Concluding
Machine is now both fast, stable and not full of bloat-ware. Have 22MB free storage, and 27MB free program memory.
Main Issue left is the time that machine takes to respond to an incomming call when its switched off. On the original MDA rom, I had 4 rings before machine actually rang. Now I have about 2.5.
Time for sleep! I'll read through this tomorrow and correct any errors...
Nigel
One essential point.
According to the publisher, Pocket Mechanic should not be installed to the SD-card, especially if you intend using any of Pocket Mechanic's functions against the SD-card - could lead to corruption.
Personally, I've installed (and run) many of the applications you've listed as "Internal mem" direct to the SD-card without experiencing any problems.
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
veletron said:
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
Click to expand...
Click to collapse
I can understand Pocket Mechanic objecting when you defrag/benchmark the medium it itself is running from.
Haven't had any problems with Resco, but haven't tried the update facility.
velvetron
I am an o2 uk user... I am asuming you are too..
I see you installed the tmob cabs for interent and 3g connection... does this work on o2 or am i being stupid..
Which should I install please advise
magpie
Re: velvetron
magpie2000k said:
I am an o2 uk user... I am asuming you are too..
Click to expand...
Click to collapse
Nope I am a t-mob user. If you are with O2 then you wont be wanting to install stuff from the T-mob ext rom!!
Nigel
want to change dopod 900 (chinese rom) to o2 exec rom
is it feasible?can thr be any incompatibility?
where can I find JASJAR_WWE_11353_137_10402.rar ?
Hi,
I am gathering the files to perform the upgrade as detailed in this thread, however I can't seem to find JASJAR_WWE_11353_137_10402.rar.
Is there a better one to use now ? or should I keep searching for JASJAR_WWE_11353_137_10402.rar ?
In fact most of the links have moved ...
Thanks
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
Can you dump your extended rom and post on the ftp site?
I've tried installing the french version, but the UI won't install. Most odd...
I can't find the ROMS
I keep getting :
File not found
You tried to access the address ftp://[email protected]/Universal/Extended ROMs/, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page.
Can any one point me in the right direction ?
I have a T Mobile (UK) MDA PRO, the wifi connection lasts for about 3 seconds, then it keeps trying, but failing.
These are the ROMs I'm after :
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
Thanks
Hi
Looks like someone has trashed the FTP site (again) all those roms have dissapeared. Hopefully they'll get restored... Did a backup exist??!
I'll search my laptop see if I have any of the missing roms
Nigel
Yup the FTP's missing practically every file...
I need the NO ID upgrade launcher file to flash my MDA Pro to XDA Exec please.
If anyone can upload it or send it me accross msn it'd be much appreciated
take a look at the last post :
http://forum.xda-developers.com/viewtopic.php?t=35123&highlight=
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
This is all I've worked out so far:
Signed_ORUK_Customize.sa.CAB
sets orange wap homepage
Signed_DiscoButton8.sa.CAB
GPRS disconnect button
Enable_VT_RTPlugin_0727_2_signed.CAB
Ringtone plugin, phone skin
UI_Orange_UK_0727.cab
The orange plugin on today screen???
Mat
Also, if anyone would like it - you are free to download contents of Orange M5000 extended ROM from my website:
www.compsoc.man.ac.uk/~matsmith/bobs/orange.zip
Just that wanted to ask what ppl have found to be best ways to install all your favourite apps/settings if u are changing roms offten?
I just started recently and have tested some 3 or 4 roms now, but already i find that doing all my customizing and app install is tedious, so i was looking for some method to make it easier.
* i have seen an app that could roll multiple cabs into one - that would make reinstalling all cabs at once after new rom easier, but i cant find the app any more. any ideas on this one?
* backing up rom differences after doing customizations - what app could handle that? propositions?
If we can work some method to do this fast and easy we would get a lot more beta testers hence a lot faster development cycle could be achieved. (=
kakainis said:
Just that wanted to ask what ppl have found to be best ways to install all your favourite apps/settings if u are changing roms offten?
I just started recently and have tested some 3 or 4 roms now, but already i find that doing all my customizing and app install is tedious, so i was looking for some method to make it easier.
* i have seen an app that could roll multiple cabs into one - that would make reinstalling all cabs at once after new rom easier, but i cant find the app any more. any ideas on this one?
* backing up rom differences after doing customizations - what app could handle that? propositions?
If we can work some method to do this fast and easy we would get a lot more beta testers hence a lot faster development cycle could be achieved. (=
Click to expand...
Click to collapse
There are no shortcuts my friend. Some apps are installed to main memory and some to storage card, when installng apps there is interaction involved, therefore no universal solution.
Look here - you can integrate the new sys folders (apps) by building your rom in the kitchen (klick it on). http://forum.xda-developers.com/showthread.php?t=317866
You can do a backup with spb backup. This way you can keep all installed programs and changes. You can restor your backup in different roms too but you have to be aware that this would mess up a few thins.
Tryed this http://www.freewareppc.com/utilities/pocketpcinstallationcreator.shtml one out - managet to create install with multiple cab files - so far so good.
But when i installed this merged install on my wm5 emulator it ended up adding links to cab files in programms folder - so much for instalation - useless.
Gues the search goes on.
Make your own extended rom with all your cabs in, this will do the trick. Its quite easy - its not like cooking a rom - i could do a simple tutorial if people wish - it only requires 2 apps
Meschle - yes, please, a tutorial for extrom making would be good, as i am still a bit green to start cooking roms - extrom would be nice way to start i suppose.
meschle said:
Make your own extended rom with all your cabs in, this will do the trick. Its quite easy - its not like cooking a rom - i could do a simple tutorial if people wish - it only requires 2 apps
Click to expand...
Click to collapse
I would be very interested in this as well.
Cheers
Ok i'll post something tonight then in the artemis upgrading forum.
I'll keep it simple - the last tutorial posted by someone was way too complex - in the way i describe you'll make your own in 10 minutes
meschle said:
Ok i'll post something tonight then in the artemis upgrading forum.
I'll keep it simple - the last tutorial posted by someone was way too complex - in the way i describe you'll make your own in 10 minutes
Click to expand...
Click to collapse
You are one dedicated dude. I like it.
That's the spirit!
meschle said:
Ok i'll post something tonight then in the artemis upgrading forum.
I'll keep it simple - the last tutorial posted by someone was way too complex - in the way i describe you'll make your own in 10 minutes
Click to expand...
Click to collapse
That is a super solution! I would love it!
Hey guys one downside to ext rom way - when installing cabs it does not give you option where to install (main memory or storage card) so everything installs to main memory.
This is ok for the programs you normally install there and registry entries. You can make a new cab that installs directly to storage card but that is a different story
OK, now i am a bit confused. As i understand there is a ROM memory on Artemis(128MB) which is divided in multiple areas - IPL1, IPL2, SPL, Splash, Radio, OS, ExtRom.
This ROM memory is writable by way of flashing. There is also storage area(not microSD) in device and operative memory.
So, as i unterstand it, putting apps in ExtROM is a pure saving, cus ur storage memory is not wasted.
Do i understand it correctly?
With the artemis rom, if you omit extended rom in your nbh building you get more storage memory (an addition of roughly the size of the omited ext rom) Likewize if you include extended rom then you loose equivalent memory from storage - so there is no advantage to having apps (i.e executables) in extended rom but for convenience sake to have cabs and settings can be useful. I suggest keeping extended rom small (2mb) so you dont loose much storage space.
Extended rom tutorial added here http://forum.xda-developers.com/showthread.php?t=327203
well maybe not 10 minutes then
meschle said:
Make your own extended rom with all your cabs in, this will do the trick. Its quite easy - its not like cooking a rom - i could do a simple tutorial if people wish - it only requires 2 apps
Click to expand...
Click to collapse
For people who do not have an extended ROM - would'nt it be similar if they kept all the Cabs in 2577 Folder in the Storage Card with Autoexec and config files to execute them sequentially? I remember doing something like this when I was using the XDA IIs - but then now -
In my case, I rarely need to install anything except TomTom and Fullscreenkeyboard from SPB. The rest - I peek into the Cab using WinCE Cab Manager, then export the contents and now have made one big Cab (appx 4MB in size) with all my registry entries, tweaks, executables, shortcuts and copying relevant files into directories.
That way I execute only three cabs after a Hard reset and moreorless everyting is in place.
Yes dev - i used to have that in my orange spv - an autorun.exe in \2577 folder - last time i tried didnt work as i wanted - but i agree worth looking into.
With the ext_rom - the purpose was to add one for those that dont have.
Ok, was trying a quite a few roms that i had today, extracted em, but did not get the extrom.nb )=
Tried to open os.nb with winimage, but it kept saying something about wrong fat etc.
Is the extrom.nb different form os.nb and other *.nb? Why cant winImage open other nb files? Or is there something else i am missing?
Also, tiried SKtracker(didnt find any free app) demo - made snapshots before and after installing apps, then tried to export relevant registery subtrees.
That brings me to that there is no import functionality in phm regedit, but i found other free regedit app called TRE which can import/export edit etc.
Maybe this TRE tool is worth including in roms, if any cookers are reading.
Any better way to hack registery?
Hidden regedit
kakainis said:
That brings me to that there is no import functionality in phm regedit, but i found other free regedit app called TRE which can import/export edit etc.
(...)
Any better way to hack registery?
Click to expand...
Click to collapse
I mentioned this on another thread, but I discovered that FdcSoft's understated Task Manager v2.8 has a supperb regedit built in. It does everything that PHM Regedit does, but it can export and import really easily, just like Windows regedit. As meschle pointed out, PHM's is faster, but I still use the bloated Task Manager just because its regedit; and it also has lots of other stuff that comes handy on occasion.
Oh, great! So many stuff to fiddle with in meschle's PremiumPlus rom that I must have missed this one.
NFSFAN 6.5 ROM FAQ:
Nfsfan's rom thread located HERE.http://forum.xda-developers.com/showthread.php?t=432487&page=238
PLEASE ASK QUESTIONS AT THE ROM'S THREAD,
THIS IS FOR THE FAQ ONLY,
AND ADDITIONAL INFORMATION TO HELP EVERYONE!!
(Besides, if we keep this thread clean, it makes it easier to find information.
And I know you all don't like to search. )
**This is a read-only section for the one-stop shopping of information
and tips to help you use your phone to its fullest potential"**
ONLY ACCEPTIONS WHERE POSTING IN THIS THREAD IS ALLOWED ARE:
1. YOU HAVE SOMETHING TO ADD TO THIS FAQ.
2. YOU HAVE A FIX TO ADD TO THIS FAQ.
3. YOU VOTED NO IN THE POLL. PLEASE INCLUDE DETAILS ON WHY YOU VOTED NO.
*If you have a problem with something that has an "original thread" link,*
*go there and post your problem there.*
*You'll get a better/faster answer if you do so,*
*plus that's where it belongs.*
do NOT NOT NOT NOT NOT post questions on this thread - this thread is for fixes and FIXES ONLY
Cody and myself have repeatedly stated to NOT ask questions about the ROM or problems here - this thread is for fixes and fixes only
do NOT NOT NOT NOT NOT post questions on this thread - this thread is for fixes and FIXES ONLY
Any and all questions and problems can and will be addressed is the actual thread for NFSFANs ROM Here
do NOT NOT NOT NOT NOT post questions on this thread - this thread is for fixes and FIXES ONLY
The more people keep ignoring the request NOT to ask questions in this thread, the more useless this thread becomes to those looking for a repository of fixes in one place rather than having to dig through the 600+ pages on the ROMs page itself thus turning this thread into something akin to the overcrowded thread there
do NOT NOT NOT NOT NOT post questions on this thread - this thread is for fixes and FIXES ONLY
Think you all can see it now to NOT post questions here - only fixes
Click to expand...
Click to collapse
Please take the time to thank NFSFAN if you have not done so already.
Table Of Contents:
[*]How To Unlock/Flash Rom
[*]All Carrier Specific Items
(Carrier Cabs/MMS Cabs/Carrier Specific Fixes)
[*]Titanium Only Tweaks
(Opera/Weather/Etc Panels)
[*]Windows Mobile 6.5 Tweaks & Registry Tweaks
[*]Skins/Themes
(Windows Mobile 6.5 Themes/Titanium Skins)
[*]Program Cabs
[*]More Walkthroughs and
Walkthroughs For Fixes
[*]Other Links
(Beta Cabs Removed, will add back when I get my programs in beta version)
[*]Coming Soon
This FAQ will be hopefully changing more often again.
Please feel free to message me with windows mobile 6.5 tweaks/mods that you find,
if you find a better titanium panel, skins, themes,
or anything that is listed in my comming soon/working on thread.
Also, if a walkthrough that is provided and is confusing or non-informative,
or if you would like a walkthrough for something else that's not listed,
please let me know also!!
This could be the best faq for the best 6.5 rom (IMO) with your help.
Thanks goes out to everyone that has contributed to this thread,
if I didn't credit you your progam/skin/theme/walkthrough/etc,
let me know so I can properly credit this!!
Thank you, and enjoy the FAQ!
For a List Of VGA Compatible Items, Click Here
(Look At Bolded Text In That Post.)
*I will be adding a Registry tweak area soon,
with lists of all reg tweaks I can find that work on the vogue, and cabs to install them if possible.
*Also, I'm moddifying all kinds of titanium panels.
*Will add left soft key mod walkthrough tonight.
*Hopefully reorganize the faq and rewrite a few things to make it easier to read/search through each section.
I Am In The Middle Of Reformatting This Faq,
Adding Info To This Faq, etc etc.
Please Bear With Me.
How To Unlock Your Phone
And Flash A Custom Rom
And Relock Your Vogue
(Following was written by: Detroit_Doug)
First go here and
READ the hell outta it until you have it step by step.
(BTW use the 2.31 unlocker regardless about the GPS thing)
OK, now that you've read that (happy dance time)
Download the 2.31 Unlocker and NFSFANs WinMO 6.5 ROM.
And make sure to download one of the DCD Carrier cabs here
and copy it to your SD card as you may need this after the flashing is done.
(will get back to this tasty morsel later)
OK, now you have an Unlocker and a ROM - now what, hmmmm
Use WinRAR and extract both the files into separate folders,
Press and hold the Power button+Camera Button and Stylus in the reset hole
until the 3 color screen comes up and it says serial,
now plug in your cable and it should change to USB.
Can you taste the rainbow and it is over the land of USB??
Great, now go into the Unlocker folder you created
and doubleclick on the RomUpdateUtility.exe
(going to be called RUU.exe from this point on).
Follow the steps on the desktop monitor.
(You might get some errors about sleep4.exe - dont worry about it)
Just keep hitting enter and it will go away after the 4th or so time.
At some point the program is going to tell you to disconnect the phone,
sounds scary doesn't it, losing the connection and all - dont be,
be a brave little soldier and disconnect it and count to 10,
cant do that, get some help in getting there,
its really that important LOL once you (or your friend)
gets to 10 plug it back in, does it say USB again? good!!
happy dance AFTER you hit a key on the keyboard per the on screen directions.
It's going to eventually reboot, let it and it will be unlocked,
let it start up and do its thing, when its done - go ahead and go back into bootloader mode again
(remember power+camera+stylus twister move you did earlier, its back to that again)
with the cable disconnected and it had better say SERIAL again..
now go ahead and plug in the cable and it should change to USB.
Now go into the ROM folder and double click the RUU.exe here ...
and follow the directions that come up on the screen...
Once its done and the phone reboots, wait...
wait some more..
still keep waiting..
no not yet ...
stop touching it..
it wont help pacing..
just be patient...
oh look an Orange screen,
ok here comes some fun.
Follow the drections to go through the setup,
don't worry about it being too accurate and all as it is about to be erased anyway...
let the autorun happen once windows starts and it will reboot on its own again.
- Yes it really IS a smartphone isn't it. LOL -
OK, as it is booting up again when there is a black screen
- press and hold the red button+green button+stylus in reset hole (known as a Hard reset)
until the screen turns gray - follow the directions again
(save you some time "press the Enter key" thats the big silver button in the center of the buttons LOL)
and when the progress bar moves all the way to the right, press the call key (the green one).
Again, it will restart (told you it was smart) and now go ahead and do the setup
and customizations and do them right this time as your hanging onto them this time
(sounds weird but if you dont hard reset after flashing it,
flying monkeys will swoop in and take your phone and your little dog toto too)
OK, now remember that DCD Carrier Cab, you do, fantastic ..
so to the storage card where you copied it to - you didn't forget that step did you???
good I knew my faith in you would pay off, tap on it and run it.
It will install all the Carrier goodies to make your life easy,
and your sex life better and even improve that certain area of a ..
wait sorry wrong channel again....
just go ahead and tap it, run it and reboot.
**Note from Codybear**
I personally go through the RUU.EXE flash process 2-3 times each time I flash a new rom.
I flash it, and then let customizations run,
and then flash again, let customization run again,
then you guessed it, flash again and customizations run once again.
It's a tad bit lengthy, but due to this process,
I usually don't have any problems that most people do with any roms.
Not sure why it makes a difference, but it does.
**Important**
As pointed out to me by Aaronpoweruser,
I forgot to mention that before flashing this rom,
upgrade your radio to a 3.xx.xx version!!
(It doesn't need to be the latest and greatest version available)
Note on Radio Upgrading By Doug:
"An upgrade is not needed - it can help depending on your carrier,
but its based on a carrier by carrier exceptions.
I'm on Sprint with the 3.42.30 radio with no issues whatsoever
where upgrading to 3.42.50 on some carriers can create problems."
To Get Back To Your Original (Stock) Rom:
It is quite simple.
All you do is go to the htc.com website,
click support,
Click dropdown menu to find your device,
in my case it's: HTC Touch™ (Alltel)
Then click download for the rom upgrade.
and then run the ruu.exe just like you did with the custom rom.
To Flash From MicroSd Card:
(Written By DetroitDoug)
Yes it has to be 2GB or less and formatted FAT32
I always find my original 512MB works perfect for flashing from
as to how to get it to your card...
Extract the ROM you want to use
Find the largest *.NBH file and copy it to your desktop
at the desktop rename it to VOGUIMG.NBH (I believe the caps in naming is important)
Copy that file to the root of your formatted FAT32 2GB or less SD Card
enter bootloader mode and it should go from there.
All Carrier Specific Items
VERIZON:
Download Verizon Carrier Cab
For verizon mms with the current nfsfan rom, go here instead of using the below, I have to update this soon.
Verizon MMS Cab
HOW TO FOR VZW USERS
GPS
1. This is assuming you have already done the agps hack
2. Dial *228 and choose option 1
3. Soft reset the phone
4. Open your favorite gps app and you should have a lock within 30 seconds.
(if that does not work make sure
you have location on in the phone settings.
Also make sure that under gps settings you have
the baud rate set to 4800 and the com port set to 4)
If it still does not work check the following reg settings
[HKLM\Software\HTC\SUPL GPS]
\EnableAGPS = 1
\EnableSmartMode = 1
\GPSMode = 4 (should also work as 2)
\NumberFixes = 999999999
\QoSAccuracy = 50
\QoSPerformance = 89
\ServerIP = 195.207.101.126
\ServerPort = 7788
\timeBetweenFixes = 1
MMS
1. Go to connection settings and select "Manage existing connections"
2. edit the only connection there
3. Name it whatever you want ie "vzw"
4. hit next and enter #777 as the number
5. hit next and put "[email protected]"
and "vzw" as the password
6. hit finish
7. install the attached arcsoft cab
8. do a soft reset.
9. open phmregedit in the start menu
10. navigate to HKLM\Software\Arcsoft\ArcsoftMMS UA\Config\mm1\WspHeader\X-VzW-MDN
and put your 10 digit phone number for the value
11. wait a min or two and do a soft reset
12. go into messaging select menu and then mms options
13. select the server tab
14. select verizon wireless and change connect via to "the internet",
the other settings should be correct.
15. wait a few min and perform a soft reset once more
16. now mms should work!!!
Originally Found Here.
Also, if that doesn't get gps to work, try this post at ppcgeeks:
(A fellow nfsfan rom user is using this fix)
http://forum.ppcgeeks.com/showpost.php?p=946566&postcount=266
ALLTEL:
Download Alltel Carrier Cab
Alltel MMS Installation Steps:
1.Install this one first!!
2.Soft-Reset
3.Install This cab
4. Soft-Reset Again, Then You're Good To Go!
Iusacell:
Download Iusacell Carrier Cab
Cricket:
Download Cricket Carrier Cab
Download: Vogue - Cricket Arcsoft MMS with MMS Fix and Wap Settings
TNZ:
Download TNZ Carrier Cab
USCC:
Download USCC Carrier Cab
Instructions To Enable MMS:
(Written By: Viper Matrix Wireless)
1. Download MMS Cab and Install
2. Go into Messaging & hit Menu
3. Select MMS Options
4. Select Servers
5. Change Gateway to http://mmsc1.uscc.net/mmsc/MMS
6. Change Verizon Wireless to USCC
7. Make sure My ISP is selected for Connect Via
8. Go into Phone & Dial *228 & then your finished.
USCC MMS Problem Fixed:
Written by: Viper Matrix Wireless
"Looks like it works now.
If you plan on using MMS/Video Messaging DO NOT install the DCD USCC Cab (IT IS NOT NEEDED.)
Instructions:
1. Goto the FAQ Download the MMS Cab.
2. Install it on the device & immediately goto PHM REGEDIT (Located in System Tools)
3. Goto HKEY_LOCAL_MACHINE -> Software -> ArcSoft -> ArcSoft MMS UA -> mm1 -> MMSCSetting -> WspHeader & edit the X-VzW-MDN change the value to your 11 digit #. Hit ok & yes to save the setting & exit out of the program.
4. Go into Messaging select menu & MMS Options. Replace the Server with whats in the FAQ & change size limit from 399 to 300k.
5. Restart & you should be set."
Telus:
Download Telus Carrier Cab
Sprint:
Download Sprint Carrier Cab
Download Sprint MMS Cab
If for some reason you cannot get Internet Sharing
or GPS working by the Carrier cab,
try this cab.
**Here's a Post At PPCGeeks With A Bunch Of The Sprint Cabs In A Zip File**
Qwest:
Download Qwest Carrier Cab
Bell:
Download Bell Carrier Cab
Download Self Serve Application Cab(Bell Only)
Appalachain:
Download Appalachain Carrier Cab
Metro PCS:
Download Metro Carrier Cab
Download Metro PCS MMS Cab
========
If I am missing any carriers,
please do let me know the name(s)!!
And If you have any MMS/Carrier cabs I do not have listed,
or links to MMS/Carrier cabs,
please let me know also!
**I've been told I'm missing Hutch carrier.
If anyone knows where I can find this please do let me know,
I tried searching but every link I found is dead. :/ **
Titanium Only Tweaks:
(More Items Coming Soon,
For Now Visit These two links.
1 and 2)
Titanium Panel Installers:
Opera panel:
Original Thread
Download Opera Panel Cab
(Got Install Cab At another location,
The cab I posted will not overwrite the
titanium cpr's like the original cab does.)
If you're experiencing problems importing your bookmarks to the panel,
download this file,
go to start > system tools,
open up Total Commander
(file explorer that allows overwriting of read only files)
copy the small text file to the "windows\" folder
and choose overwrite if asked!
that should take care of the problem.
I am working on a script to allow the two
different known locations of the bookmark file.
Till then, here's the file:
Mortscript Replacement File
Or Use This Cab Installer
FaceBook:
Original Thread
Download Titanium Panel Cab
Download Necessary Facebook Program
Download Necessary Facebook Instant Message Program
If you get an error when you go to launch the program,
and you have the program installed (not just the titanium panel)
then download and install this cab.
(the panel was looking in the wrong location for the exe)
System Panel
Original Thread
Download Titanium Panel Cab
CTwitter
Original Thread
Download Titanium Panel Cab
Download Necessary PocketTwit 7.2 Program
Artesea Twitter
(I like this one better,
It displays the last ten tweets.)
Install Instructions:
Unzip, Install New Mortscript Version(beta),
Then install the panel by clicking Install.mscr
Orignal Thread
Download Program
Office
Original Thread
Download Titanium Panel Cab
Fav People Panel
(I like this better than stock Fav People Panel,
this one allows you to change the name
and soft keys in a friendly user interface)
Original Thread
Download Titanium Panel Cab
HTC Audio Manager
(For Non NFSFAN Rom Users)
Original Thread
Download Cab Installer
Comm Manager
Original Thread
Download Cab Installer
Analog Clock
Original Thread
Download Cab Installer
All In One Notifications
Original Thread
Download Cab Installer
CLauncher
(Program Launcher With Program to Change Program)
Original Thread
Download Cab Installer
Volume Panel
Original Thread
Download Cab Installer
TitaniumWeather With Radar
Original Thread
Download Cab Installer
Icon Packs:
Beyond Invisible Icons
Buff Icons
HTC Icons
SpilIcons
Stardock Icons
Titanium Weather step by step fix for NFSFANs V10 ROM (Stock Weather Panel)
(This has been reported to work with other versions of Nfsfan's roms,
and some other versions of Weather panel.
No harm to try, you can always reinstall the original panel again.)
- Download the file as offered HERE
- Extract the zip file to desktop
- Copy the TitaniumWeather.mscr file to your phone (storage card or where ever)
- Click on Start Go into settings>today and under the 2nd tab (ITEMS) disable "Windows Default" (6.5 Interface AKA CHome)
- Use Total Commander to copy from location you saved the file to to the root of \Windows - overwrite if needed or if you are having issues coping it over rename the original file(TitaniumWeather.mscr) to titaniumweather.bak and then copy it over
- Go to settings>today and enable Windows Default (6.5 Interface)
- Go to Weather Tab and in lower right click on Setup
- Select 2nd option (Run full update and exit)
- Wait for full update to occur and scroll through pages all icons should have appeared again (although I had to run the full update twice)
May need to start IE or Opera or whatever browser you use to gain an internet connection first to perform update if you already dont have the option to "connect to the internet automatically" set in your options before attempting the update
(Thanks to 4Thought for this) If your in Canada or other locations just enter in your location code directly in this format: NAM|**|**|****** replacing the * with your location in the SETUP options (Setup>Option 3 (Forcast options/setup) > Option 1 (Zip or Location Code)
an example would be NAM|CA|ON|OSHAWA for Oshawa Canada or NAM|CA|AB|EDMONTON for Edmonton, Alberta, Canada
Or if that doesn't work,
Try this File
Download this file,
Turn Off Titanium (Start>Settings>Today, click Items tab, Uncheck Windows Default, press ok)
Copy file to Windows directory, overwrite if asked.
Turn On Titanium(same steps, just re-check Windows Default)
Then you're good to go.
Titanium Weather Fix Cab Installer
Taskanium
Original Thread
Installation Instructions:
I modified the files and put them inside this cab.
It will install the files in the right place,
but you will need to go to
windows\program files\taskanium
and click on
"TaskaniumInstall.lnk"
Then soft reset or you will only see Add New Task.
CHome Editor
Original Thread
Download CHome Editor Cab========
To turn panels on and off, go to: Start > System > Titanium Customizer and highlight the tab you want to disable, and click "disable" on the right hand side.You can also enable tabs that you have disabled by highlighting the name, and clicking "enable." Also, you can reorder the tabs using this program.
(If you have other requests let me know.)
Other wm6.5 Customizations & Registry Tweaks
(will have cabs and the registry locations for noobs and non-noobs)
Is ActiveSync continuously popping up on your phone?
if so, then you need ASKicker (My Ultimate ActiveSync Fix):
Link To My Thread (Under Construction Still)
SMS160:
Makes Texts go up to 160 characters.
(only works if your carrier allows 160 character texts,
otherwise it will split the text at it's default size)
Sprint, Alltel, And I think Verizon Allow 160.
Bell only allows 140 character texts.
I have no idea about other carriers, sorry!
Download Cab
Registry Location: (Hexadecimal)
HKCU\Software\Microsoft\SMS\TextShared\IS637MaxAsciiCharacters = a0
(No Spaces In: IS637MaxAsciiCharacters
for some reason when I save this post it's adding a space)
Skinny 6-7 Reception Bars:
I have alltel and only have 4bars to show my reception level.
This cab makes my phone have 6-7 bars to more accurately show my reception/signal level.
Download Cab
Registry Location: (Decimal)
HKCU\ControlPanel\PhoneExtendFunction\CDMA\SignalStrengthLevel = 7
(No Spaces In: SignalStrengthLevel
for some reason when I save this post it's adding a space)
SDKCERTS:
(Needed for various windows mobile6.5 stuff like skins etc)
Download Cab
Four Column Start Menu:
With Honeycomb:
Download Cab
Without honeycomb:
Download Cab*Will Be Updating The 4Column Stuff Soon Soon....*
NFSFAN T9 Registry Fix:
(Fixes T9 Default Problem)
Download Cab
Registry Location: (Decimal)
HKLM\Software\Tegic\eT9\IME\CarrierDefaultTextMode = 1
Phone App Fix:
(If you're phone app(dialer) keeps popping up,
this is exactly what you need!)
(This also fixes the problem with the lockscreen interuppting/preventing the alarms from working.)
Download Cab
Registry Location: (Decimal)
HKLM\Software\Microsoft\Shell\ShowTitleBarClock = 2
Finger Friendly Volume:
Original Thread
Download Cab
(I suggest installing to Device if asked,
Modded cab to include SetVolumeConfig
instead of having a separate cab.)
Default And Touch Skins Files in Rar
How To Skin Text File
ScreenShot
reStart:
(This let's you reorder the 6.5 start menu,
and also change the icons for start menu items.)
*To add your own icons to the program,*
*place the icon in "\Program Files\reSTART\icons"*
Original Thread
Download Cab Installer
Move wm6.5 Lock Slider:
(QVGA Only-Will Make VGA)
(Moves slider to the bottom of the screen
and the calendar/time to the top.)
Original Thread
(Different cpr file than titanium's cpr,
to install, copy to windows directory)
[url=http://rapidshare.com/files/234584366/SHK_Customs_Movie_6.5_Lock_Slider_to_bottom.cab]Download Lockscreen cpr File Cab Installer
*If you have customized your lockscreen,
the cab installer or copying the file to the windows directory
will overwrite your lockscreen cpr,
Its the same principal as titanium cpr's.
Keep Music Playing:
All you do is install this,
and then when you have music playing in any program,
tap the power button to put in suspend mode,
and you're good to go.
Download Cab Installer
Registry location:
HKLM\System\CurrentControlSet\Control\Power\State\Unattended\
Change Wav1 dword value to a "0"
Turn aGPS Off:
If you'd like to use your gps without connecting to a data connection,
use this cab, it should work.
It will make your phone take longer to acheive satellite locks,
but if you don't have a data plan, this is what you most likely want.
*I have not tested it personally as I like aGPS,
but if it does not work, let me know.*
Download Cab
Registry Location:
HKLM\Sofware\HTC\SUPL AGPS\
EnableAGPS - 0
EnableGPSSmartMode - 0
GPSMode - 2
Windows Mobile 6.5 Themes And
Titanium Skins And Manilla 2D Themes
**You Need To Install SDKCERTS Before Installing Any Of These!!**
More Coming Soon.
6.5 and Titanium:
Heineken:
Original Thread
(This Is A Beta Till The Creator Updates)
Crismon Darkness:
Original Thread
Simple Blue:
Original Thread
PureBlack2:
Original Thread
Ubuntu:
Original ThreadManilla 2D:
Audi Theme:
**INSTALLATION INSTRUCTIONS IN RAR FILE!**
**Created By Atoz350**
Download Here.
Screenshots:
Manilla2D Homescreen
Titanium
Lock Screen
Messaging, Menus, Scrollbars
Program Cabs:
(No Warez!)Opera Mobile Browser:
I'll upload these myself to rapid later
Thread with newer version
.Net Framework 3.5:
I know I personally need it for tons of programs/games/etc.
Download Cab
Mortscript 4.3B2 (Beta):
(Newest Version - Fixed Bugs from 4.2)
Download Rar with All Mortscript Items
(Includes ppc cab, setup exe to install from computer,
Manual, Commands List, ReadMe)
Also, Check here for Mortscript Examples/Help.
Microsoft Office Mobile 2007:
(Opens 2007 Documents) - Does not replace existing.
Download Cab
Full Mobile Flash:
(not a stand alone player, I use this with a bunch of programs,
next opera mobile version is reported to be flash compatible!!)
Download Cab
Wolf's Translator:
Translate All kinds of languages, it uses google's translator.
(If you have a problem that occurs with program,
please post at developer's original thread!)
Download Cab
Original Thread
G-Alarm:
(Last Free Edition)
Download Cab
Pandora:
Download Cab
Having problems with songs cutting off?
Fix is located here!!
I'll make a cab of the changes sometime soon,
but till then, have at it!
LastFM:
(Untill I create a mortscript to start a
data connection before starting this program,
and then stoping the data connection after closing the program,
you MUST initiate a data connection before you can use this program.
Mortscript coming soon!!)
Download Cab
Dictionary Editor:
(Edit the t9 dictionary on your phone)
Download Cab
Task Facade v4:
Program's Forum
Task Facade Theme Thread
Download Cab
No Data Cab:
If you don't have a data plan,
this is for you. It's a program to switch off data,
and prevents any programs from using the data connection.
Download Cab
SIP Change:
Program to change the default keyboard
if you're having problems with the keyboard defaulting
to something other than what you chose.
Download Cab
========
I also recommend researching either Sashimi or User Customization.
Or better yet, both. They are extremely helpful.
There are more threads out there for User Customization,
But the Sashimi Link is to the "Home" Website.
Other Walkthroughs:
As Reported by mnherky:
"I'm having a problem when i set up active sync to my work exchange server. they require that i have 4 digit pin to unlock the phone. when the phone starts it looks like it is trying to go to the keypad to unlock but only the top bar shows up, the rest of the screen is blank. the only extra thing i install was the touch pal keyboard.
thanks for the help and ROM"
Common fix: "Try not setting up the PIN. Many people have reported problems using a PIN with the new lock screen."
His fix: "It's required by my company in order to set up active sync.
If anyone else is having this issue switching to classic [display] seems to have fixed all the issues.
kind of looks ugly but it works."
Turn GPS On:
(6.1 and 6.5 Compatible)
Go to Start>Settings>Personal>Phone
Click services tab, make sure location setting is highlighted,
click get settings, Check on, press ok.
For google maps,
you'll need to have it open of course,
then go to menu, click use gps.
(it should have a check mark next to option when it's turned on)
NFSFAN Dialers
(Written By Jmitr)
NFSFAN has 2 different ROM’s available for our Vogues.
1. Windows Mobile 6.1
2. Windows Mobile 6.5
Both of these ROMS use different dialers, these are listed below:
1. WM 6.1 ROMS GSM Dialer
This dialer is one of the newer ones available.
It features slide to anwser/ignore and other features.
To go into this dialer first I have to list the issues
with GSM dialers on CDMA phones.
• 911 and number codes usually do not work
• Data sessions. In most gsm dialers the data is always active. This causes quite a battery drain
NFSFAN has managed to fix these problems to an extent.
911 works, phone codes cannot be directly dialed but are
found in a folder under systems.
The data is NOT always active,
however the data arrows are “broken” or greyed out.
2. WM 6.5 CDMA Dialer
This is basically the same as the stock dialer that came with your phone.
It may not be “as pretty” as the gsm dialer,
but everything works just like stock.
This is the reason that you will no longer find the
phone codes folder in the 6.5 ROM as there is no need for it.
It is possible to skin a dialer and add colour etc.
This changes the appearance of the dialer
without actually installing a different dialer.
Some people have installed newer dialers in the 6.5 ROM as well.
Just remember the issues with gsm when you do.
You may find your battery depletes quickly (data issue)
or 911 doesn’t work (BAD if you figure that out when you need it!!)
Phone codes Walkthrough
(Written By Jmitr)
• ##778 = ..\Windows\EPST.exe ##778
View/edit phone provisioning (you'll need your phone specific MSL to edit)
Always keep a record of your phone's ESN, MSID, Security, EPST, and M. IP settings in case a flash reprograms your phone.
Run the EPST utility by:
1. Typing ##778 into the dialer Or from the ..\Windows directory you can also directly execute EPST.exe or EPST.lnk
2. If EPST.exe quickly loads and exits, then try a few more times before resetting your phone and trying again.
3. Select VIEW and then record your info. On most versions, the A-Key is blank and will not be displayed. If your phone fails to authenicate with your provider, you will need to call your providers technical support line to get a new A-key. The A-key is not reuseable.
To edit your EPST if you have lost security and data connections:
NOTE: The Verizon MSL is 000000 (six zeros) - you don't need to run getspl.exe for a Verizon phone, skip to step 6.
1. First follow these steps to obtain your phone's MSL unlocking code
2. Obtain getspl.exe
3. execute that on your Titan
4. Type in your ESN(Hex) into the input field
5. Hit go and record your phone's MSL Number (EPST unlock code)
6. Re-run the EPST app and now select Edit and unlock with your MSLNumber
7. Edit the necessary keys
8. Select Done when finished
There is a thread in the Vogue Forum called "##778 hacks shared" please visit it here for more information:
http://forum.xda-developers.com/showthread.php?t=360288
• #33284 (debug) = ..\Windows\FieldTrial.exe
Field Trial shows your signal strength in dbm and channel info
What the numbers mean:
Signal strength is a number ranging from roughly -50 to -105 (your phone may show as a positive number). Closer to zero means a better signal, i.e. -
50 (roughly full signal) to -105 (roughly no signal.)
• #3424(diag)
= ..\Windows\DMRouter.exe /DIAG
Diagnostic Mode, required to repair, or configure the Operator service related programs
• #38278 (fuart)= ..\Windows\Fuart.exe Fuart
Enable or Disable Fast UART mode. Resets device after choosing.
A UART is a serial to parallel data converter. I would assume the Vogue uses this mode for serial connections to a PC (USB ect). Because HTC uses this connector for headphones etc it may also affect these.
For Sprint, there's an extra # at the end instead of pressing Send. (ex. ##778#)
If anyone has any additional information please pm JMITR and I will add it to the FAQ.[/QUOTE]
** Opal (HTC) volume control will not work with the CDMA dialer **
** because you can't adjust incall volume. **
** GSM dialer has problems on 6.5, **
** and it doesn't work properly. **
** For this reason the volume control in the 6.5 ROM is the default microsoft one. **
OverClocking The Vogue:
HTC Perfomance and GFXBoost
DO NOT affect the phone in any way.
It is just a placebo affect.
"They don't work either of them.
GFX Boost uses the QTV layer to draw surfaces,
Vogue doesn't have it." By Nfsfan.
Other Links:
HTC Touch (aka Vogue, xv6900) Links!
Registry Tweaks/Hacks/Edits - Share them here!
A guide To Windows Mobile 6.5
WinMo 6.5 Stuffs Links [ Themes, Skins, Apps, Plugins and more ]
[All][WM6.5 Titanium plugins]
Mortscript Examples Accumulation
[Ideas] Realistic and usable Titanim plugins
[APP][Update 07-11-08] LockDown, keeping stuff private
Opera Backup/Restore Script
WM 6.5 Themes and Development
Development Resources for Windows Mobile
All wm6.5 Titanium Skins
How to Create Titanium Skins
[Online tool] Titanium CPR/PLG helper v0.7
[APP]"OpnMarket" Freeware Market/ AppStore
WM6.5 Themes and Development
Bluetooth Proximity Lock
How to customize the Chome WM 6.5 ROM
WM 6.5 Custom Taskbar
WM 6.5 Kitchen QVGA and VGA Developer Edition
CHome/Titanium Modifications - Adding Panels
All S2U2 Customizations
Tips To Maximize Battery Life
Checklist For Extended Battery Life
How To's For Developing.
Themes And Development
Post All Cabs for 6.5 For Titanium
EVDO Speed Tweak For Touch Pro
(Might work for Vogue,haven't Tried yet)
Registry Tweak Section at PPCGeeks
Discussion of Registry Tweaks
Mod to have 32gb sd card(Not Microsd Card, Actual Full Size. Serious Modders Only.)
Texts Keep Showing That They're Unread When They're Really Not??? Check This Link Out!!
Coming Soon/Working On:
~I have all DCD Carrier Cabs, but still finding all MMS Cabs, I need the following mms cabs, if you have them or can send me a link to them I'd appreciate it: lusacell, cricket, tnz, uscc, telus, sprint, qwest, bell, appalachain.
*Cabs to remove unused keyboards from sip list.
*Working on mortscript coding to get the opera panel to look into the two different known spots for the bookmark file.
*Change Raphael Bookmarks text in the opera panel, submit me some ideas to change it to, i'll be making cabs!
*Trying to figure out how to launch opera mini using mortscript, it's possible,
just might take a little while if someone doesn't already have the fix someone.
*Trying to fix async killer cab,or find a better one.
~Also I'm going to be working on getting this launcher panel I have seen,
It allows up to 18 programs and I want to make sure it is fully compatible with the other panels!
~Softkey registry locations so you can change them on all panels, and maybe eventually make a user friendly program.
*Will note 6.1 compatible cabs/information in this faq in attempt to hold off 6.1 users till they finally upgrade to 6.5.
*Attempt to make this list smaller, it's growing faster than I can do everything.
*Look into custom fonts, write walkthrough.
*Gps For Carriers Section
*=Going to try and get these done this weekend.
And there's more that are not listed here.
~Mortscript to start a data connection and run Lastfm program, then when you close last fm, it shuts off the data connection.
~Waiting on registry info to get twitter panel working
~Problem told to me in PM(Just my personal note to remind myself)
NOW WORKING ON/HOPE TO HAVE DONE IN THE NEXT DAY OR TWO:
Working on making the mortscript file to make it look into two diff locations with the already given code,
async fix,
then opera mini thing with opera panel,
then the keyboard cleanup thing.
This Summer:
Going to build these programs:
1. Pill Identifier that uses drugs.com's pill identifier information,
and will relay all their information to the phone in a mobile friendly format.
2. They have facebook sync programs to sync pictures,
I'm going to try and see if it's possible to sync friend's pictures from myspace.
I really have to update this. hahahaha
Reserved For Future Expansion
Reserved For Future Expansion
Reserved For Future Expansion
Reserved For Future Expansion
Reserved For Future Expansion
BUMP!
Let the problem solving begin.
codybear said:
BUMP!
Let the problem solving begin.
Click to expand...
Click to collapse
thanks for this. great post! can't wait to see what kind of themes come up for titanium/6.5 menus
raybond25 said:
thanks for this. great post! can't wait to see what kind of themes come up for titanium/6.5 menus
Click to expand...
Click to collapse
I know it!
There are already some out that are showing alot of potential.
I'm personally going to work on some titanium ones here in the near future.
But have a few other things I want to do before I play with titanium.
Edit:
i have a bunch of themes but have to edit the titanium cpr info within the cabs,
they overwrite the existing cpr's and it erases certain panels.
Edit:
@ryudo423 down below,
thank you.
There were others that helped out with bits and pieces.
I just wanted to give back to this community,
and didn't know where to start,
and I love nfsfan's roms,
so I said why not since he has 10982750913745714 million pages of posts in his rom thread.
Wow codybear this is just awsome thanx a ton.i'm sure it's going to help many people.u rock!
Will the fix cab work for the updated version of Titanium Weather ("Showaco's Titanium Weather v3.1 Ported to QVGA as v3.1.2 by mnemonique")?