Related
I'll try to keep it short.
Lost T-Mobile PDA. Bought an unlocked (I assume) AT&T SX56 off EBay.
Will not Active sync. Don't know why.
SIM will not register. Also asks for 4-8 char password which I do not have.
Phone recognizes T-Mobile Signal, but ignores SIM. Says emergency calls are possible, but I do not want to call 911 to check.
Lots of XDA software is already installed and operating.
So for those are the main issues. Hope this is the right area to post.
Looked around for answers for a couple of hours, with no luck.
Any suggestions?
Ummm As far as i know the xda's software blocks anything but O2 simcards.
I think the answer is to wipe the Xda's data, and install a non-branded verson of windows mobile '03.
I'm sure theres one on this forum somewhere, or someone will know where to get one.
Have you tried unlocking your device? Look here...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock
Hope it works!
Fin
I purchased unlock code,
but now i cant enter in it, it is always at
"Sim Lock. You can still make emergency calls if your service provider supports it"
And showing Emergency only,
is there any way to skip this or put code in it ?
please.
dzipk said:
I purchased unlock code,
but now i cant enter in it, it is always at
"Sim Lock. You can still make emergency calls if your service provider supports it"
And showing Emergency only,
is there any way to skip this or put code in it ?
please.
Click to expand...
Click to collapse
Put a sim card from from another provider to your phone. Than it will ask you to put the unlock code.
Cheers
ibeqa said:
Put a sim card from from another provider to your phone. Than it will ask you to put the unlock code.
Cheers
Click to expand...
Click to collapse
I tried Almost all Netowk Sim, but same, even without sim it is on emergency,
any other idea plz ?
or flashing will help ?
You better e-mail to : support @ x02ht-unlock.com , and they have check your imei and give the Japanese Rom to you.
khlhenry said:
You better e-mail to : support @ x02ht-unlock.com , and they have check your imei and give the Japanese Rom to you.
Click to expand...
Click to collapse
Is there no other way ?
PLS help me x02ht
pls guys. have unlocked my phone but can't make call i can only receive call becaurse the phone keeps asking for some kind of code which i can't read becaurse is in chines. please help me out what can i do?
philips2008
dzipk said:
I purchased unlock code,
but now i cant enter in it, it is always at
"Sim Lock. You can still make emergency calls if your service provider supports it"
And showing Emergency only,
is there any way to skip this or put code in it ?
please.
Click to expand...
Click to collapse
hi DID u solved ur problem
Hey Guys
Did somebody fixed this problem
I got code but no way to confirm it
Thanks
Jack
x02ht
yes i got the same problem. unlocking done but i got this msg : sim lock. you can still make emergency calls if your service provider supports it.
how to remove this msg?
thanks.
hi i have same problem is there any way out
boldlink2
It seems that people say to upgrade the rom and it should work.
Some older threads discussed this. The new rom is available at XDA-Wiki
Good luck!
I'm sitting here with my locked cavalier waiting for the unlock code to come to me!
big ach said:
It seems that people say to upgrade the rom and it should work.
Some older threads discussed this. The new rom is available at XDA-Wiki
Good luck!
I'm sitting here with my locked cavalier waiting for the unlock code to come to me!
Click to expand...
Click to collapse
I'll definitely consider ROM's upgrading. Thank you for the advice.
However, I'd like to post some feed-back about people behind http://www.x02ht-unlock.com/
( Dear forum admins, PLEASE do not remove this message. It's quite emotional, but I'm posting it to achieve one of two possible results. And every one of them is positive enough:
- people behind x02ht-unlock.com would hear me finally, and help to solve my problem (and, probably, I'm not the only one who has the same problem, but couldn't get any feedback via the support form);
=OR=
- someone wouldn't spend $50.00 for no result. )
Their support was more than terrible: they replied to all my questions promptly, but only until I finally sent them money for an unlock code ($50.00).
The current state: my phone is still not locked, and no one at support @ x02ht-unlock.com is willing to even talk to me on this problem.
I've done everything according to the instructions, but still get "SIM locked" message. I've sent them my problem's description (and even attached a screenshot), and no one replied to me. I sent problem description via email and using their "Send a question" form. Both both were left without _any_ reply.
It now seems to me, that they're cheating and the program never worked for anybody (someone on the internet can say it works, but who can be sure that he's not the person who receives money for that program?)
Even if the program is working, in fact, but they simply don't know how to solve my problem -- they could tell me about that and offer to return my money (because the program didn't its function). So, it's cheating anyway.
The worst thing is that PayPal won't cancel this transaction under any condition. Here's what they say:
We have completed our investigation of this case. No further action is
required by you at this time. We have denied this claim. As stated in
our User Agreement, PayPal?s Buyer Complaint Policy only applies to
the shipment of goods, not to disputes about the attributes or quality
of the goods received. We have noted your claim in the seller's
record. The seller's account privileges will be limited if excessive
complaints are received.
Click to expand...
Click to collapse
buy a universal unlock sim--costs about $10 in ebay.
X02HT unlock
hi i got the code but i don't know where to place the code, still the screen says
"sim locked. but you can still make emergency calls if the provider supports it"
please help.
thanks.
code will be not work
only unl file...but now x02ht-unlock.com site down....
where we can unlock x02ht i have 3 pcs
Can't enter SIM unlock code
I got the same problem.
Neither can enter the unlock code or do anything.
The message "sim locked. but you can still make emergency calls if the provider supports it" doesn't disappear
dzipk said:
I tried Almost all Netowk Sim, but same, even without sim it is on emergency,
any other idea plz ?
or flashing will help ?
Click to expand...
Click to collapse
I found some information and just trying
Please try and send ur feedback!
1. Power on phone with a non-original SIM card inserted
2. When prompted, enter unlock code you received from us
Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.
3. Your cell phone is now unlocked
If you see a message Sim lock.. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. Plug your phone in charger and wait about few minutes to few days until it allow you enter unlock ...
if tried 1 times = 30 minutes
if tried 2 times = 1 hours
if tried 3 times = 2 hours
if tried 4 times = 4 hours
if tried 5 times = 8 hours
if tried 6 times = 12 hours
if tried 7 times = 24 hours
........15 times = 4 days
jar.of.god said:
Attention! Use the onscreen keyboard and make sure that wireless mode is OFF.
Click to expand...
Click to collapse
What onscreen keyboard? This is a non touchscreen phone, with a hardware keyboard.
yukster said:
What onscreen keyboard? This is a non touchscreen phone, with a hardware keyboard.
Click to expand...
Click to collapse
Sorry, it means the keyboard.
Anyway, have you tried this way?
any news
same problem ..........as my o2xht .....guys pls help
I know I'm a noob, but I've been struggleing with this for a while now. I put in probibly 6 hours last night and haven't any clue if I'm even close to being complete.
I bought an HTC Touch MP6900SP (Sprint) and was told it had a clean ESN. Turns out it didn't and I'm up the creek because I paid cash. I bought it to replace my motor razr which has a clean ESN, but is quickly dieing. I'm trying to clone my ESN but can't get mtty to work properly. Once the ESN is swapped, the RAZR will go in my junk drawr.
I've tried to follow the steps here:
http://www.mobile-files.com/forum/showpost.php?p=355768&postcount=1
but when I go to fire up mtty I can only enter the rtask a command then the program or phone won't allow me to do anything else, even type the next command.
In the boot loader I have the following info:
VOGU100 MFG
SPL-2.31.CoKe
CPLD-3
Can someone please walk a noob through this. I'm totally new to this whole unlocking thing and could really use some help. The phone is locked to the account of the previous seller who refuses to release it. I've got the 2.31.coke on there now and when I boot it normally I also have the Alltel rom that fires up. HELP!!! PLEASE!
Edit: In MTTY when I run rtask a this is what I see, but I can't type anything after that.
rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!
This has been covered...
SEARCH!!! MTTY is actually working, you just can't see the text you are typing... Just be careful typing everything in and you will be good to go...
Alright, I got through MTTY, and am not onto working in CDMA workshop.
I put the phone into DM mode, Active sync disconnects, but CDMA shows it is connected to Com1 port successfully, but fails when I attempt to read the ESN.
I can't seem to find the diagnostic modem drivers that I need and think the lack of the drivers is what is causing me grief now.
Believe me, I'm looking everywhere I can to get information. I've got tons of hours into this now.
Edit: Got the drivers installed and working properly. Still having problems reading from the phone with CDMA.
Edit 2: Had to figure out the proper com port in CDMA, getting warmer.
scanning and finding esn addresses right now! If this thing works I'll be so damn happy!
im still reading up on this, but seeing information that has been corrected over time, then finding some old posts that may be outdated.
using MTTY with all of the steps to superCID... is that actually changing the ESN in one failed, fast swoop? Is it actually doing what CDMA does when scanning/writing?
ESN
cox abele said:
im still reading up on this, but seeing information that has been corrected over time, then finding some old posts that may be outdated.
using MTTY with all of the steps to superCID... is that actually changing the ESN in one failed, fast swoop? Is it actually doing what CDMA does when scanning/writing?
Click to expand...
Click to collapse
Hey did you get this to work? I changed my esn last night and the phone works. Can make and receive calls. Only prob is that I can't connect to the internet. I think it is a problem with the user name/password but not sure. I keep getting the 67 error when trying to connect. I only changed the esn and nothing else.
Did you have any luck? If so what about the internet thing? Any help would be much appreciated. Been reading and trying to figure this out for a while now.
Thanks,
-T
Hey man, welcome to XDA
What Airline do you fly for? It's good too see another fellow Pilot on here.
As you can see from my sigpic, I'm with Air Canada Jazz.
b727pilot said:
Hey did you get this to work? I changed my esn last night and the phone works. Can make and receive calls. Only prob is that I can't connect to the internet. I think it is a problem with the user name/password but not sure. I keep getting the 67 error when trying to connect. I only changed the esn and nothing else.
Did you have any luck? If so what about the internet thing? Any help would be much appreciated. Been reading and trying to figure this out for a while now.
Thanks,
-T
Click to expand...
Click to collapse
Have you tried installing the DCD carrier cab. I think this is the link. Just double check.
http://dcd1182.n715dp.com/index.php?dir=carriers/
Help with ESN Change. Phone works just not internet
Csquared said:
Have you tried installing the DCD carrier cab. I think this is the link. Just double check.
http://dcd1182.n715dp.com/index.php?dir=carriers/
Click to expand...
Click to collapse
Thanks for the reply. No I had not tried the DCD carrier cab. First of all let me get this out of the way. NOOB here.
I tried researching the DCD cab because someone else suggested it and then tried it and it didn't work. I think it might be something with the user name and password for vision service. This is what I did:
Flashed the Touch (it is a sprint touch) to the 6.1 wm latest rom (sprint). Then did the esn swap from my razr (also sprint). After the esn swap I flashed again using the 6.1 sprint rom (just wanted to make sure nothing changed after I did a rom flash). Phone works fine on sprint and I even called them on it and they think it is a razr. I can make and receive calls, voicemail etc. Just can't get the internet working. Just get the 67 error. Any ideas?
-T
jmitr said:
Hey man, welcome to XDA
What Airline do you fly for? It's good too see another fellow Pilot on here.
As you can see from my sigpic, I'm with Air Canada Jazz.
Click to expand...
Click to collapse
SWA! Ever in MDW?
-T
b727pilot said:
Thanks for the reply. No I had not tried the DCD carrier cab. First of all let me get this out of the way. NOOB here.
I tried researching the DCD cab because someone else suggested it and then tried it and it didn't work. I think it might be something with the user name and password for vision service. This is what I did:
Flashed the Touch (it is a sprint touch) to the 6.1 wm latest rom (sprint). Then did the esn swap from my razr (also sprint). After the esn swap I flashed again using the 6.1 sprint rom (just wanted to make sure nothing changed after I did a rom flash). Phone works fine on sprint and I even called them on it and they think it is a razr. I can make and receive calls, voicemail etc. Just can't get the internet working. Just get the 67 error. Any ideas?
-T
Click to expand...
Click to collapse
Do you have a data plan setup with Sprint on your Razr?
Csquared said:
Do you have a data plan setup with Sprint on your Razr?
Click to expand...
Click to collapse
Yea I have the old sero plan. It includes unlimited data. I think that is what you mean. I can run opera on it so it is working.
-T
This might be trivial but lets check.
Goto:
Settings/Connections/Connections/Advanced/Select Networks
It should show Sprint in top and Work network in bottom.
Click edit under Sprint and make sure its set to #777
Then try this:
Settings/Personal/Phone/Services/Internet/Get settings
Then have IOTA done by pressing start.
No Internet Still......
Csquared said:
Then try this:
Settings/Personal/Phone/Services/Internet/Get settings
Then have IOTA done by pressing start.
Click to expand...
Click to collapse
Thanks Csquared. I tried this and this is what I got. I also have posted this at http://forum.xda-developers.com/showthread.php?p=3413006#post3413006 . Not trying to double post but was getting some help over there also.
Phone is working great using the donor ESN but no internet. Here is what I've got:
- Sprint Razr (donor ESN phone) and Sprint Touch (Had bad ESN now has Razr ESN).
- Have Data plan on my Account.
- Did the changes from the original post and phone works fine (can make and receive calls)
- When I try and connect to the internet it gives me error 67, can not connect #777 and 1012 error.
What I have tried:
- Start/settings/services/internet/get settings/ and start IOTA.
- Tried making a new connection under start/settings/connections/connections and setup a new #777 connection.
- Changed Active Profile from 0 to 1 in ##3282#
None of this worked. Under ##3282# my settings are:
User Name:
Active Profile - 1
MIP_MODE - Mobile IP Only
User Name - (My Username)@sprintpcs.com
SPI MN-HA - 4D2
SPI MN-AAA - 4D2
ReverseTunnel Pref - Enable
Home Agent IP Address - 0.0.0.0 (for some reason it will not let me edit this setting)
Primary Home Agent - 0.0.0.0
Second Home Agent - 0.0.0.0
HA Shared Secret (HEX) – Blank
AAA Shared Secret (HEX) – Bunch of characters
Advanced:
ESN - Donor ESN (From Razr)
MSID - My Phone number
Not sure if any of this makes sense. I am just trying to get the internet working. Please let me know if anyone has any ideas. It does say "Preparing vision services" when I try to connect to the internet but always fails with error 67 Username and/or Password incorrect. Also get Cannot Connect Dialed #777. Also get error code 1012 could not prepare Vision services please try again later.
Thanks very much in advance for the help!
-Tony
Well I know this is prolly not the right thread to put this under however I am not sure which is and the person who started this thread is doing what I wanted to know was possible to do. And second I was wondering how to do it. I am completely noob on this. I did as he did and bought a new phone which ended up having a bad ESN.
I have a Nokia with Verizon and it broke. They wont replace it for me so I went and bought an LGVX9100M. I have been researching for around 4 hours now and cant find a thing if I can take the ESN from my Nokia which is clean and working and put it to the LG to make it work. I am not familiar with any thing that has to do with programming cell phones or using the programs. I am however a pretty quick learner.
Is there a way to do this? Is there a program I need or a way to just do it in the phone? IF I can do this with a program how do I do it and what stuff do I have to replace the numbers with?
Bad ESN's= Unrecovered lost or stolen property, or property with a bill due over its usage.
Helping with Bad ESN's, is like helping repaint a stolen car.
WR
hi;
need help with my htc s621, was using it in Vancouver/ Canada;
couple of mounts ago used a service here to unlock it and was able to use it in Iran while I am staying;but with some problem;
on regional/Locale there is no Iran in the country list, there is problem that I think it is related to it;
when I make a call using the keypad, the call will be ended so it won't make a call, but if i save the number into the phone book and call the number from there; then it works, to mention that I changed the locale to Sweden, because this way at least i can make a call from phone book, and when I get a call can not return the all using the number, because it will add the country code to the number, so I have to enter into phone book and remove the country code then be able to use it.
anyway I can make this work?
some kind of ROM update ?
I have searched many local shops here, but there are other models of htc around but not excalibur to get some help;
appreciate any help;
Welcome to forums
have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Reflashing to a newer ROM could help your problem (which I don´t understand quite well)
Good luck,
bluesky88 said:
hi;
need help with my htc s621, was using it in Vancouver/ Canada;
couple of mounts ago used a service here to unlock it and was able to use it in Iran while I am staying;but with some problem;
on regional/Locale there is no Iran in the country list, there is problem that I think it is related to it;
when I make a call using the keypad, the call will be ended so it won't make a call, but if i save the number into the phone book and call the number from there; then it works, to mention that I changed the locale to Sweden, because this way at least i can make a call from phone book, and when I get a call can not return the all using the number, because it will add the country code to the number, so I have to enter into phone book and remove the country code then be able to use it.
anyway I can make this work?
some kind of ROM update ?
I have searched many local shops here, but there are other models of htc around but not excalibur to get some help;
appreciate any help;
Click to expand...
Click to collapse
Hi,
I am also in Vancouver although my phone is a T-Mobile Dash that I got on eBay. You really have a different problem here. I assume that you are using an Iranian SIM card when in Iran and not your Rogers/Fido SIM.
Another guy I work with has a Rogers s621 and even though I unlocked and flashed his ROM for him (originally to the Kavanna 6.1 and now to the EVO 6.5 ROM) he had trouble on trips to China with his China Mobile SIM which itself needed to be unlocked to use it. He ended up buying a phone over there instead.
I assume you are still using the Rogers 6.0 ROM, which is better than the T-Mobile but far behind either of the two I listed above. I would flash to Ookba's 3VO ROM, it is really great and runs beautifully. But follow the direction to the letter, don't skip any steps. I have no idea if it will solve your particular problem, but even if it won't you'll be a lot happier with the phone using it here in BC.
Here is the link to the ROM.
http://forum.xda-developers.com/showthread.php?t=523718
Thanks for the replies guys;
I will do some reading and will upgrade to see if it will become better or not;
yes I still have the Rogers 6.0 ROM; and use an Iranian SIM card;
I wonder if I upgrade and then some problem occurs is it possible to downgrade to what I have, perhaps a way to backup the ROM I have.
Thanks
As long as you follow the instructions on my previous post al should be ok, but in case it fails you can always go back and install another ROM, but believe me if you install any new ROM (6.1 or 6.5) you´ll be so happy that you won´t want to go back
OK;
I did install the new ROM (EVO 6.5 ROM);
it is very nice, I like it but the name of my country Iran is missing in this version also,
by the way I believe this ROM is application unlocked, I wonder why I can not install any application on it;
I searched online and found couple of free apps fo wm 6.5 but it won't be installed. I have not got any error or something.
some of the apps will go half and some up to the end but I don't find it anywhere.
any idea why?
if anyone has installed an application on htc s621 using same ROM please provide a name and a link to download if possible.
appreciate your help.
bluesky88 said:
OK;
I did install the new ROM (EVO 6.5 ROM);
it is very nice, I like it but the name of my country Iran is missing in this version also,
by the way I believe this ROM is application unlocked, I wonder why I can not install any application on it;
I searched online and found couple of free apps fo wm 6.5 but it won't be installed. I have not got any error or something.
some of the apps will go half and some up to the end but I don't find it anywhere.
any idea why?
if anyone has installed an application on htc s621 using same ROM please provide a name and a link to download if possible.
appreciate your help.
Click to expand...
Click to collapse
I don't know if this will help, or whether you have already tried it. You would probably have to do this while in Iran with the Iranian SIM card in the phone. Try entering your settings menu, All Settings > Phone > More > Networks > Menu > Preferred Networks. Scroll down to see if your Iranian network is shown with all the other international choices.
I have no idea how this list is generated, I assume it is by Rogers/Fido here in Vancouver. But you may have a political problem on your hands rather than technical. Are the sanctions against Iran reaching to some organization of cellular providers and the Iranian carriers are being blocked by them from being on the list? I don't know the answer, you would know a lot more about what is restricted in Iran (from within or without) than I would.
In any case, good luck.
OK; Here is what append with my phone;
I upgraded to 3VOLUTION series to see if the dialing problem will be solved or not, everything was OK after installation no errors or something, but as for the calling, as my phone had problem calling out using keypad, now this time after upgrading to wm6.5 my phone could not dial from phone book either,
so practically useless phone, it could only receive calls.
I searched for a solution online , did not find any answer, looked around phone shops here in my city, until I found a guy that said he can make it work, he had a box so in less than 20 minutes did something and phone start working properly, I can make a call from keypad and phone book no problem,
and in the location status the country of Iran is not listed either I am not sure what he did using the box.
I did asked the guy if I upgrade or downgrade WM can the same thing happen again, he was not sure.
I am thinking of downgrading to 6.1 since there are not much application found for 6.5.
but I don't want to pay the guy again for the same thing.
does anyone know of this things?
what he actually did with the box that can not be done without it?
appreciate any help
guys sorry, this might be a dumb question but i dont have a lot of knowledge on this things, but i want to use my GS2 on AT&T. is there any way i could do that?
You may want to delete this post and repost it in the q and a section. There you will get some help
Sent from my SGH-T989 using Tapatalk 2
You need to call T-Mobile directly and request the unlock code for your phone. Just tell them you are leaving the country next week and need to use another/international SIM card to get service. Be sure they ask for your e-mail address before you hang up because this is how they notify you with the unlock code...
You're welcome.
Or you could do the chat feature. Then you can have all the reference numbers if you print/email them. Just make sure that you change the APNs when on the ATT network....