Hi I've got a UK T-Mobile SDAII on contract, unlocked thanks to this forum, which I sometimes use with a French SFR pay-as-you-go card.
Somehow I've blocked the PIN on this card and have had to obtain a 7 digit PUK / Personal Unblocking Code. I can key in the code, but when I try to press the 'done' key, nothing happens.
I've also tried unblocking it via my 'Super GSM Reader' which does process the PUK, but says that the code is incorrect - although in the absence of proper instructions for the software that could be because I've not used it correctly (or because the PUK will only work in the phone?)
Any ideas how to get around this? Also, why is the PUK linked to the brand of the phone - and is this why the GSM reader didn't work?
Thanks...
Can you help me?I have my code to unlock my samsung but don't know what to do with?My phone ask me for code pin but i don't have *and # so i can't enter the code i have?I need help,please.
Nobody to help me please?
Nobody to explain me how to enter the code i pay?
Please?
Courtesy of http://www.unlocksamsung.co.uk/guides.htm
Model: Samsung i900
1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen a "lock" symbol with the letters NET will appear
4. You will also be presented with the options "OK"; "Dismiss"
5. Press the "OK" option
6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).
7. Enter your 8-digit unlock code.
8. Your phone is now unlocked
Click to expand...
Click to collapse
Thank's a lot,i try but my code is wrong i think, it don't work, but thank you very much!!!
Can you try this for me?
go to phone dialer, enter the following: *#7465625#
can you change all entries to Enabled?
**I've an unlocked Omnia so can't try it for you first.**
Ok i do this but if i try again nothing is change, can you explain me what you want me to do?
Surely if you set all options to enabled, it'll enable ALL locks on the phone instead of disabling them?
After setting the "network lock" to disabled, when you enter that service menu again, it just automatically re-enables it again
Where can I find my unlock code
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
craig46 said:
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
Click to expand...
Click to collapse
Just been surfing about..now you will not get you unlock code until the i900 you have from your provider is more than a year old. So, unless you want to pay to have it done (+/- €40 here in NL) you will just have to patient!
omnia sim unlock
no free solution?
for sure there is not..... i can get you the code for 30 euros though in arround one day
www.3grpl.com can help for 15 euro and fast service i have tested
This is for an I907. I imagine that if you are locked to a carrier to you call tech support and do something along these lines and go through the same process.
That is, assuming that you have some sort of account with the company that originally had your phone. I got my off ebay, but it was AT&T locked. Luckily I have an ATT account.
I called ATT support (611) pressed, 1, 5, 5, 0 (or something like that to get to a customer service person and said:
I am going to Hong Kong, a friend purchased a prepaid sim card for me. He said that I needed to call AT&T to ask for a subsidy unlock code to use my card over there.
They checked the imei and account code and then gave me my 8 digit number.
May not apply if you don't have an account with the locking company. Good luck.
There is a solution
http://www.bytetips.com/free-unlock-tricks-for-samsung-omnia-i780-and-i900/
One more solution
http://www.samsung-omnia.org/how-to...omnia-i900-(remove-simlock)/?action=printpage
Try this but not sure
Just enter this code on ur omnia and u have a unlock phone..
*2767*3855# > this is for Hard Reset, not to unlock sim: edited by Admin
I unlocked mine just now... Mine was locked to Orange, UK...
Enjoy
Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Im still doing this been very few at the moment :/
g928a 7.0
he helped me unlock it for free no questions. your a good dude i thank you
Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
Hey all! I have an almost brand-new LG Rebel 4, LML212VL. It has a Qualcomm Snapdragon 425 (MSM8917) SoC. I'm looking to root it. I don't have any other device that I can use, only the phone. Any help is appreciated. I've looked at this thread, but when I install poot and run it, it simply says "Invalid Qt version" and closes. I don't have any computer. Thank you!
Bump
anything?
kel5isgod said:
anything?
Click to expand...
Click to collapse
I have the same model phone. If I find a root guide for it I'll let you know. Have you tried asking in the lg threads? Maybe go over there and ask around also.
Hello,
I have this phone LG LML212VL. Need to carrier unlock. Any help? I had this sent to me but still could not get anything to work.
How can you check if my Android phone asks for the unlock code?
Option 1
1 - Dial the following sequence on your phone’s keypad as if you were going to make a call:
2945#*model number of your LG#
To find out the model number of your LG:
Settings - About Phone - Model
On the sticker under the battery
For example: If you have an LG 610 type 2945#*610#
2 - The sequence typed will provide access to a hidden unlocking submenu with the following sections:
Network Lock
Service Provider Lock
Network Subset Lock
Corporate Lock
SIM Lock
3 - Check your phone prompts for the unlock code correctly under Network Lock or Service Provider Lock. If it does, you can submit your unlocking request.
Option 2
Insert a SIM card different to the Tracfone - U.S.A. network.
You will be asked to "Enter network unlock code" or for the "SIM network unlock PIN".
Click to expand...
Click to collapse
Good luck. BEst bet would be to check out "cdma-yemen" they are a talented team of Yemen coders. They always deal with Tracfone and can unlock about anything!
As the title, when I press "Add account and device", it says "Can't add more account to this SIM card. Please change another". Because the first number of phone number in Taiwan(+886) is "0",and I forgot to remove it in last account, so I couldn't unlock my Bootloader. I deleted my account, and I cant add my account and device now. I complained with online customer sevice in Taiwan, but she said the only way is change another SIM card.
I tired to borrow another SIM card, but noone can lend them to me.
Is there another way to unlock the bootloader lock? How about using wireshark and get the token, then fastboot it? Unlocked Bootloader file (can anyone upload it?)?
Sorry for my bad English.