Related
Dear all ..
please ...i try to upgrading my JASJAM to WM6 is okay and Every thing okay but when i need to install the arabic file i maen CAB file like ACERT_ARB &Default_APrayerTimes_JSJM_eula the arabic dosn't work and my device tell me this message (( can not ran in this device )) So can any one tell me how to Solved this problem ..
Best Regards
GSM system said:
Dear all .. [snip!]
Click to expand...
Click to collapse
Yep! That's right. If you're trying to install the cabs from i-mate then Imaginet's Arabizer is i-mate branded. Wait (a long time) for i-mate to release WM6 for JASJAM (if ever) or buy your own legit copy of the Arabizer suite.
Arabic on jasjam
Arabic runs with any WM6 version on the jasjam using the attached files (also available on imate jasjam Arabic ROM).
Procedure:
a- Mount your EXTROM using HERMES_MountALLExtROM.cab.
b- Copy the files to the jasjam EXTROM.
. . . 1- Default_ACERT_JSJM_eula.CAB . . . . . . . . . . 243 kb
. . . 2- Default_MultiLang_AR_JSJM_eula.CAB . . . . 755 kb
. . . 3- Default_Imate_WWE_HER_V3.30.00.cab . . . 87 kb *
. . . 4- Default_PT_Reg_FixKeyboard.cab . . . . . . . . . 2 kb *
c- Using File Explorer, run the files and install on the main memory.
*Files 3 and 4 enable Arabic text on the sliding keyboard.
You can install the rest of the suite the same way, or try: http://www.smartnetwireless.com/PocketIslamPPC.htm which is free of charge and can be installed from the computer on the SD card.
Salaam,
You must extract this font.zip in yuor windows directory before you install arabic.
These are arabic fonts.
Best regards
Good luck
Actually it is not necessary to install any extra fonts.
The way I do it is, I install Pocket Islam + Bukhari & Muslim hadeeth packages, I then install the 4 files mentioned above; afterwhich I perform the configuration.
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
uploading the arabizer after upgrading to WM6
GSM system said:
thanks for every one replay to me the message i try to install the cab file but stilll the same problem my device tell me this message can not run in this device .....
respactfully
Click to expand...
Click to collapse
at this moment, i'm uploading to you the Arabizer of the JasJam after upgrading to WM6. and it's working perfectly on any Rom. tried and working.
here you go the arabic system and also working arabic on keyboard.
Here you go, download the file, extract it. and move it to your storage card, and instal it in order of the numbers as from 1 to 17.
You have a full arabic working system and keyboard as well.
enjoy
http://www.megaupload.com/?d=FF6T44YI
@ GSM system, “Please read the following carefully”.
After installing WM6 and all is well and the phone actually works:
1- Connect through the USB and copy the file (HERMES_MountALLExtROM.cab) to a folder on the phone.
2- Now on the phone, click start menu --> Programs --> File Explorer and find the file (HERMES_MountALLExtROM.cab) and click on it to install it.
3- Once installed, reset (reboot) your phone.
4- Once Windows up and running, you will notice through “Activesync” that you can see EXTROM folder and the files inside it.
5- Copy the 4 attached files to the EXTROM folder to run them from there.
6- Again, on the phone, click start menu --> Programs --> File Explorer and find the ExtROM folder, click on it to open and you will find the 4 files.
7- Install them one by one then reset your phone.
If the above description does not work for you, you need to write a step by step procedure of what exactly you are doing so that we may be able to tell you where you are going wrong.
Q- Are the file format changed when being copied?
thanks Mr. Simple i Appreciate it you brother ... but pleaes where is the file.(HERMES_MountALLExtROM.cab).
thanks to all ... i try to instill all the cab.file i maen the arabic lang but don't work ...i don't know why some device after upgrading to WM6 then instill the 17 cab file the arabic is work okay ...but some device also i-mate ..the arabic is dosen't work ...So ...where is the problem ..if can any one help me ....
best regards
I think with some wm6 roms (like the latest lsvw rom) the device is reset to be an htc tytn device instead of imate jasjam and that what is what is causing the message "cant be run on this device." As u notice when u upgrade to the latest lvsw rom, the device name is set to htc_tytn. This dose not happen on the latest black rom. This is just my thinking why is this happening. I hope someone can solve this issue as I am thinking of going back to black rom.
Salam,
I am glad I was able to help, I have attached the ExtRom mount file.
May I also add that the best version of WM6 for Arabic is LSVW of May 19 which I have been running for the past 4 days without a single problem. http://forum.xda-developers.com/showthread.php?t=307951
I have also attached Tahoma font file (not important).
Good luck.
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Which pocket islam that is best for our device?
Thanks
I think the arabizer software is signed to work on Imate only
Sniper258 said:
Simple
Do you have Imate JasJam or a different one.
Also the 4 files attached are enough to run everything as what is seen on Jasjam or I have to add some more cabs.
Thanks
Click to expand...
Click to collapse
I think the arabizer software is signed to work on Imate only
My device is T Mobile Vario II which is exactlly like the JasJam and the Tytn ..etc.
I tried more than 7 WM6 ROMS, and many ways of installing the Arabizer. but always
got broaken Arabic letters and the message
"can not run on this device"
Please can you all indicate what are you devices brands. Thanks
The phone I have is an i-mate Jasjam, I have upgraded this phone more than 15 times between WM5, WM6, Radio and EXTROM. This is not the first Windows Mobile phone that I have neither it is the first time I install Arabic, In fact I had a role in Windows 98 and Windows 2000 Arabisation many moons ago.
My current configuration is: IPL=1.04, SPL=1.01 MFG, Radio=1.41, OS=WM6 17913 LVSW, EXTROM=cooked. I do not install a complete ROM, and I always install individual component using MTTY.EXE (except for the radio). Immediately after a new install, I fill in user and device info; I then install the Arabic software. Initially I had a problem with the Jasjam sliding keyboard until I identified files 3 and 4 responsible for its activation.
Please notice that:
1- If you manage to install i mate Arabic ROM (WM5)
JASJAM_Arabic_1.20.305.3_1.20.304.104_1.07.03.10_ship.zip available on ftp://ftp.clubimate.com/ . Arabic should be fully functional and we should no longer talk about hardware. Be very careful, things could go wrong.
2- If you install Pocket Islam suite, you will be able to view and type Arabic using the screen keyboard (there may be a RTL problem when writing Arabic).
3- You can install the Pocket Arabiser Suite from http://www.imaginet-software.com/index.aspx?p=arabizer. It should work with any windows mobile device, but the keyboard will not. You know what to do (files 3 and 4).
4- I am not sure if the Arabisation software checks for a Jasjam signature, if such, you may need to install one or all:
. . . Default_MT_PC_Hermes_Generic_REG_060609.CAB
. . . Default_AHermesKBFlag_JSJM_eula.CAB
. . . Default_PP_KeyBoard_Layout.cab
. . . Default_PP_Version.cab
5- Try a clean EXTROM with only Arabic files in it, in case particular files are preventing Arabic files from running.
6- Try the way I do it (review my previous post) it may work for you then you can uninstall the software you do not need.
I apologize for the lengthy post, but I felt it may be important to a lot of people.
Good luck.
Dear Mr. Simple ....
i am thankfull caz you are Support this sabjact ....i have i-mate JASJAM after upgrading to WM6 no accept Arabic that is the problem ..i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me ..Mr. Simple to fixed this problem ...
with my best regards
@ GSM system,
Do not worry, if it works for me, it should work for you. Try the following:
1- Download the WM5 jasjam ROM from imate site (mentioned in my previous post).
2- Extract the EXTROM.nb file (this is the complete jasjam extended rom)
3- using MTTY.EXE install it to the phone like this:
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
3- Ensure you have WM6 (preferably LVSW as it installs the extended rom automatically) is installed.
4- Press (Left Soft Key + Right Soft Key + Reset) all at once and install the whole lot.
5- If it does not install automatically, mount the EXTROM and run Autorun.exe.
I hope you understand that the problem is not in the method/s provided, the problem is in applying them (or your hardware, which is unlikely). Concentrate on using the exact files provided and ensuring the steps are followed carefully.
Now, please notice saying "i try any mathed to install arabic but dosen't work ...your mathed and more but no way so please if you can help me" does not help much. You need to list the exact steps you are executing, at what stage an error appears and the error message.
If all fails, see if you can install the full jasjam WM5 ROM and if Arabic works for you then, if it does not, you may have a Hardware fault.
Can you also tell us; when you bought the phone was Arabic installed on it?
Important: A large number of this forum visitors are people with issues/problems or with development interests. Please have them in mind and ensure that your writing is as clear and descriptive as possible to help them or to enable them to contribute effectively .
Good luck.
Dear Simple ..
i am so sorry to bother you but i don't have any one to helpe me just you the problem now i don't have the Mtty.exe how to find this ...the my another qustion this mathed do by MS dos or how can i do it this ......
respactfully
@ GSM system,
You still did not come back with what I asked for, a step by step scenario and the error message!!
You need to do a lot of reading, please refer to:http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and go through some tutorials.
Also to: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG where you will find mtty.exe inside the SPL-1.01MFG_Pack.zip file.
I can only tell you 4 points that may save you time when trying to connect:
1- The file you need to load using mtty must be .nb (like EXTROM.nb)
2- to be able to connect the device must be in the IPL SPL page (color screen) to get there press (Power button + OK button + reset) release the reset then the other two.
3- to be able to connect using mtty you must disable activesync USB connection, do the following: right click on the Activesync icon on the task bar, then click on Connection Settings... and uncheck Allow USB connections.
4- It is best to have the file you wish to upload to the phone in the same folder as mtty.exe.
You are now in dangerous territory, navigate very very carefully; you could end up damaging your phone, what you want to learn is not difficult and already on the forum. Make sure you read the WIKI properly and use the search option of this board.
Good luck.
I was searching for a way to add the Dutch language to the B&B 4.1 ROM of Tom.
I saw in the thread a lot of people where searching for this so i made a little howto
First of all i need to thank the guys from who i have gotten this here in xda (search & find):
- ctibor
- hiblopp
Well here we go:
Code:
1. Copy T9DutchLdb.dll to \Windows folder of Artemis.
4. Edit the Artemis Registry in HKEY_LOCAL_MACHINE\SOFTWARE\HTC\IntelliPad
a. Incerease by one the value of the "LibraryCount" dword (in my case from 10 to 11)
b. Created a "Library10" dword with the value of 8. (This is for the Dutch language).
Soft reset and you can use the dutch language in Phonepad!
If you want to use another language not provided you must copy the appropriate T9<language>Ldb.dll to the \Windows folder.
AND
change the Library10 value to the value for your language.
These are the languages i found in another thread:
7=Danish
8=Dutch
9=Finnish
10=Hungarian
11=Norwegian
12=Polish
13=Romanian
14=Slovak
15=Swedish
I have added the dutch language file for people who want to make the change!
Hi RikP just did your settings and it seems to work fine thanks!
Do you know also a way to get the keyboard to recognize dutch words?
(or do I have to wait till i typed them all )
Thanks for the guide!
vanderaatje said:
Hi RikP just did your settings and it seems to work fine thanks!
Do you know also a way to get the keyboard to recognize dutch words?
(or do I have to wait till i typed them all )
Click to expand...
Click to collapse
Did a quick search and found this:
http://forum.xda-developers.com/showthread.php?t=299036
Does it fix your problem?
T9
A better method would be the easy one . First you have to copy your t9 file directly in windows folder. Than select phonepad as input method (click on the little arrow beside the keyboard on the bar) and select Options... Input Method: Phone Pad. Select Options... Languages tab... Database... and select your language.
For t9 DLL's i downloaded t9languages.zip from http://forum.xda-developers.com/showthread.php?t=290007.
I added Romanian in my phone and works great.
PS: Sorry my english, hope is allright.
Hello Everyone!
I had problems with my Ipaq. It has an italian ROM. So I´d like to flash it with an german ROM. On the HP-Homepage i found an italian and a german ROM. But of course it isn´t possible to use the german version. Couldn't anyone cook or dump a GERMAN ROM for the Ipaq 114? I think here are a lot of Germans who would really really appreciate that.
Many thanks!!!
Thomas Further Informations: Isn´t it possible to overwrite the italian nbf-file with the german one???
Got new informations!!!
Instruction to flash:
1.) You need the german and the italian Rom-update. Both have to unpack on your hard disk!
2.) You connect PDA with the PC, but not with the ac-power.
3.) Start the italian Softpaq. Meanwhile the Update the programm will recognize, that the update does only work with ac-plugged
in.
4.) No you rename the Romfile from the german Update with the name from the italian one and copy it to the folder with the
italian Update
5.) NOW plug in the AC-Power Cable
On this way you bypass the country check - this will be done before the checking of the ac-power.
No ideas???
It must be possible... Here are so many "professionals"!!!
By the way: This is a great forum here. Interesting discussions...
Has anyone experience...
...with the instruction from above???
Thanks for supporting
First, I have to say Hello!, this is my first post in this forum. I own an ipaq 110 classic series with WWE(world wide english).
I'have tried many ways to perform a language change, none of them appears to work, at least in this model. The method described above don't work on ipaqs 110 series, because this model only have a mini-usb port in the bottom end; which supplies data connection and power. Then... How I can "connect the AC power" to the device?. O maybe I'm omitting something.
Sorry about my english, I'm from Spain.
First of all you have to forbid your pda the charging via usb.
Use these settings to do this.
When the software ask, reactivate the settings...
Try it...
Greetings!
Bye the way. My english isn´t better. I´m from germany
EDIT !!!!!
SORRY!
It doesn´t work to deactivate the charging funktion. The problem is, that the pda use just one cable for the datas and for charging.
When you start the rom-update the setup programm automaticly start the charging option. The update starts immediatly...
No chance for overwrite the original language rom-file with the one from - in my case - the german one...
Need help! Please!!! It´s very important for me to have a german system (especially for my software).
additional information: i have a spanish model and i need urgently a german one...!!!!
HELP NEEDED!!!
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
uriazael said:
Finally... I'have found a way to change language on ipaq 110 series (I think I have seen this method somewhere else)...
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
I'm not sure how safe the procedure is.
I suggest you run the ROM update of your original device language before doing the change, to check the screens, the timing, etc.
Hope it works in your device. Mine now is speaking spanish.
Regards.
Click to expand...
Click to collapse
T H A T `S I T ! ! ! !
Thanks a lot!!! IT work !!!
Now i have the german version!!
You are the best!!!
Need Help To Change Language On Ipaq 110 Classic
hello everyone
I am going to get an ipaq 110 classic from my friend but it is French version, I have gone through this whole article and understand all the steps to change the ROM update for changing language but please someone guide me "WHERE I WILL HAVE TO PASTE THE "HPImage.nbf"
Also please adv if any other important step to follow?
Thanks
First you need:
1. ROM update for your device's language (in this case spanish)
2. ROM update what you want to change (germany or other)
both can be downloaded from HP's web page.
You must unpack each ROM in a directory with winrar, by separate, for example in the desktop.
Run the RUU utility of your device's language, the program will make some checkups and tells, it is correct the ROM and the language. Proceed with the update.
THESE ARE THE IMPORTANT STEPS:
1. The progress bar in the PC screen will not move forward, and in the device the screen will show "RUU downloading mode" in a white background (I suppose this is the famous "bootloader mode"). In this moment you have to paste the "HPImage.nbf" from germany ROM (I suggest before you copy the file and let ready for the paste) to the directory with your device original ROM language, you have aprox 5 sec to do so; the update will continue with no warnings. The device's screen will show "downloading mode" and the progress bar in the setup in the PC will reach the end.
2. The device will perform a "CLEAN BOOT" in green letters and... your device is speaking germany (or other language).
If you have some further questions send me a private message...
Greetings ThonaV
Need Help To Change Language On Ipaq 110 Classic
hi ThonaV
good morning, let me try today after getting home, sounds like should be ok now. will keep you posted.
thanks for your reply buddy.
kaled
Need Help To Change Language On Ipaq 110 Classic
Woooooohuuuuuuuu
I Have Got My Ipaq 110 Classic Speaking English!!!!
Thanks For Your Good Support Guys, It Was Not Possible To Do This Change As Hp Customer Support Will Never Provide This Kind Of Information To The End Users (of Course If They Start Providing These Technical Knowledge Nobody Will Buy Their Stuff And They Will Loose Chance To Make More Money)
But Thanks Again Guys For Your Great Help:d:d:d:d
Netherlands ROM
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
I have the actually german based ROM (April 2008) and wondering about this symptom:
Always when I connected my "blank" IPAQ 114 to active sync (sync with local Outlook) "and make" a new partnership - the Time on my PDA is "-9 hours" from our local time.
I test this with other IPAQ 114, with other Windows XP, and other AS 4.5 - always the same problem. If I use an other PDA (HTC Touch HD, Pro, S740) all work fine and the time on this devices are correct...
Any Idea what is the timesync Problem with ipaq 114 and active Sync?
the Language settings, time zones are correct on the IPAQ114.
I found a solution for an old IPAQ 6315 :But is that the really solution?
I found out that this is a know problem by HP. There is no current fix, but they did provide me with a work around. The work around is a 2 step process and both must be done before performing an ActiveSync. If not, the problem will become worse by advancing all the appointments in the host's calander. First, in the date and time properities on the PC, UNCHECk the automatically adjuct clock for daylights saving time box. Second, if the IPAQ is located in Eastern Standard Time, set the IPAQ's time zone to Indiana (IN) as they do not observe DST. If in MST set the time zone to AZ. If in CST set the time zone to Saskatchewan, Canada.
greetz joy
Error message on IPAQ 110...
Hello everyone
I need a little help with my IPAQ 110. I have the WWE based rom on it, but when I'm trying to change it I'm getting an error code 203... & the strange thing is - the SKU ID code on rom & device are the same!!! Do enyone had this problem and how I can fix it???
Thanks
Thanks all,
I have the English changed from German version!! I have Ipaq 2490.
You are the best!!!
DubyDu said:
Hi, a have a problem, i got Ipaq 114 witch Netherlands ROM (NLD, Dutch) and i would like English, German or French (it does not matter), but to flash i need Netherlands rom to, but on official HP site it isn't (just only English, German or French). Can anybody help me pls, give me some link to Netherlands rom? thx
Click to expand...
Click to collapse
It seems that there is very different ipaq 114 Dutch
You can try this ROM but it does not work on mine
ftp://ftp.hp.com/pub/softpaq/sp38501-39000/sp38994.exe
I change Language to Portuguese. Great topic. thanks to all.
my iPAQ 114 speak poruguese now !!
Sorry my english
can anyone post here the ROM for english ? i can`t download it
thx
Does anyone here have any idea if is possible to update an iPAQ 116 (that is pretty much the same as the 110 and 114) from WM6.0 to WM6.5?
I have one here but I don't even have it's instalation CD. For some reason I can't connect it by USB, just by Bluetooth.
Any help?
Hello !
I just bought a HTC Touch HD. I often need to write in russian. I generally use the built-in Phonepad keyboard and T9 for french and english. Spanish, german and italian are aslo available. How can i add russian language there ? I would need T9 and also cyrillic letters on the phonepad instead of latin letters.
Is it possible so far ?
Thanks for your advises
Here it is on narod.ru service:
rus_keyboard_TouchHD.zip
By the way there are keyboard, dialer and letter search stripe for contacts in russian in the archive. You can install all of it separately.
Does it add Russian T9?
does it have en/ru switch?
Thanks
SDK
BTW this installation requires the SDK rights. I did have it as cab. I'll post it as soon as I find it ...
[upd] http://forum.xda-developers.com/showthread.php?t=437307&highlight=sdkcerts
BUT it does not help.
no permissions to install...
any ideas?
Cheers
Yes, you can change keyboard layout.
Also, you don`t need those SDK rights to install it -100%. You need to kill some process in memory to install it successfully - SIPGT_app.exe. It works well for me.
Maybe this link will also help you.
Thanks, i will try this
Does QuickMenu v2.8.410.1610 works on HTC HD? I`ve tryed this one http://www.ipmart-forum.com/showthread.php?t=324733 but it doesnt work !
Sorry ,nevermind its just my french ROM!
Working for me (in french) with the files here => http://forum.xda-developers.com/showpost.php?p=3173925&postcount=28
Install original cab then copy/past and replace old files by news in program files/TA/QuickMenu 2.8
Read this post http://forum.xda-developers.com/showthread.php?t=471292
sorry but the wi-fi doesnt seems to work ..i have squares everywhere! Any idea? Ty~
rename the 0409.mui to your_language_code.mui (0407 german, 0410 italian, don't remember the other ones). Of course it must be you ROM language, not your spoken one.