Related
Tried various WM2002 or 2003 ROMs, and settled back on WM2002 as it seems more stable, but I still have a problem where the phone seems to turn off (no green LED blinking), and when you press the top button to turn on the PDA it is as though you have warm reset it. I think I might be missing calls because of this and will have to change the phone if this is the case. Now when I know I might be expecting an important call I have to keep checking the green LED is blinking! I also get periodic SD card erasure unless I write protect it! Overall it is a nightmare to use because of these two issues.
ROM versions:
3.17.03 ENG
ROM date 5/15/03
Radio 4.21.00
Protocol 32S54
Hi mate, my XDA does the same thing - I have upgraded my ROM too (see profile for version etc.). Best thing I can offer to you is that it resets when bumped or knocked (like if I put it down on my desk a bit too hard), the screen will go wierd and then reset. Don't know why this happens but I keep checking my green light for flashing too. My vibrate function no longer works wither. I plan on calling O2 tomorrow to follo up the issues.
Well, I had the same problem with my QTEK 1010, os 2002, until I downloaded a very good clock/alarm software: pTravelAlarm (make a google search for it). among its functions is a very good one which is Chime, (in alarm menu) it wakes up the device each one hour so it will not get stunned. Now I never miss a call. The only disadvantage is that it makes the battery lasts a bit shorter than before.
john banks, there must be something loose in your device, carefully disassemble it and check all screws inside, if all ok, I'm afraid you might have to send it to a repair shop.
after installing the SER 1.2 special version from xda developer, my XDA run smoothly and I can see the sender of SMS anymore
it happen to me several times as i finish a phone call and go back to the Today screen but on the left top corner still display the title "phone".and i cant press it to open the start menu when im at the Today screen not even the start key works.try hold down the power button to shut down but no luck.but everything still works at the Today screen (weather,music plug-in etc)
had to soft reset it.anyone have this problem as well?or is it a radio problem?
iluvgillgill said:
it happen to me several times as i finish a phone call and go back to the Today screen but on the left top corner still display the title "phone".and i cant press it to open the start menu when im at the Today screen not even the start key works.try hold down the power button to shut down but no luck.but everything still works at the Today screen (weather,music plug-in etc)
had to soft reset it.anyone have this problem as well?or is it a radio problem?
Click to expand...
Click to collapse
I use this rom with 1.51 radio till the rom is issued. I never had to soft reset because the rom crashed. The only really annoying issue i had is the bluetooth's one (Time to time, it is impossible to reactivate bluetooth without SR. This is why i do not desactivate it anymore ). We can always argue on choices, taste and colors but this rom is quite stable and fast enough for what i do.
EDIT: BTW check also which applications you have loaded. Did you reinstall a backup done with SPB after coming from another rom? I experienced many problems with that. Even if not pretty, i always reinstall now all my applications after installing a new rom (and i use pimbackup for calendar, contacts,... infos)
I have same problem too, thx
Post in Schaps 3.60 thread...
Not so as you think
I don't agree with that the ROM issue after call. Your deveice may be has some problem. What about bluetooth yes, there is some interesting moment that you select open bluetooth, it doesn't open, as soon as you mark to open you should restart your deveice, then it starts with opened bluetooth. BUt when you are going to turn the bluetooth off there is no problem.
I'm sure, Schap as a great moderator will solve this problems in next generation of his ROMs. The variation 3.60a (has posted), may be 3.60b, then 3.60c may be. Or he will post something interesting like Iphone platform.(I want him to do it)
iluvgillgill said:
it happen to me several times as i finish a phone call and go back to the Today screen but on the left top corner still display the title "phone".and i cant press it to open the start menu when im at the Today screen not even the start key works.try hold down the power button to shut down but no luck.but everything still works at the Today screen (weather,music plug-in etc)
had to soft reset it.anyone have this problem as well?or is it a radio problem?
Click to expand...
Click to collapse
I have the same problem too, what I have discover is that during the call and the screen is off (either it off automatically after a time or you press the power button) then anytime you power on the screen again in between the call or after the call in a short time the problem tiggered.
the only way you can 'fix' it is to wait until call end then off and on your screen once then the 'start menu' back or wait for an amount of time until the phone lock tigger (that one with number pad)
I said 'fix' (with quote) because this definitely a temporary solution to deal with this problem
hope schaps can get more idea in how to trigger the problem and can fix this soon
other than this issue, the rom is really very great
cheers.
To the OP,
If you are using a Hermes I suggest you reflash from scratch ie Schaps ver 3.6 rom, then use radio rom version 1.47.10..
Install ALL your applications from scratch, manually. DO NOT restore from a previous backup using, say SPB Backup; that will screw your installation. Make sure all your apps are the latest versions, capable of running under WM6.
Preferably install one app at a time, as you would anyway, then test the phone and make sure it is working before installing another app, and so on.
Don't install a theme changer or other similar software until you are absolutely sure your installation works. Leave the performance parameter settings as they are, ie at default.
If all else fails use the ROM combination in my signature below. Rock solid installation, no problems or crashes.
Let us know how you get on.
Cheers
WB
have same problem also has anybody found that if you use internet shearing and recive a call you cant hear anyone and phone searches for network
thankz,
jdc21
no crashing for me..
the rom is really stable.
apart from the bluetooth issue its really good..
really stable and fast enough..
works really great for me..
Thanks Schaps for such a great rom.
waiting for 3.60b
Take care that Phone Dialer Skin could cause this kind of problem
wacky.banana Is maybe right
I have Schap's 3.60a along with my trusty Radio 1.47.10
No BT Issue till now
I use BT also with DrYAR-Bluetooth 1.6 (Whoopy!) No Issues at all either starting or Stopping BT
I'm using It for two days now It's OK
Did I mention that this rom Is even FASTER than the previous 3.5x?
i hav the same problem
When did this problem start?
I didnt have the bluetooth turn on just using it normally.and all application i install is fresh onto the phone memory.never install any program on the SD card.about the dialer skin i use Schen Kaiser 3G dialer.
Anyone got fix yet?
Same issue, not just Schap 3.60a
massimo729 said:
When did this problem start?
Click to expand...
Click to collapse
I've had this same issue for weeks now, ever since the newer ROMs have come out for the official releases (i'll have to track back the build numbers). I had it with Sleuth's last release, the vp3G 3.0 release, and now Schap's 3.60. I've done what other posters have said and hard reset, not loaded any apps, and still have the issue.
I believe I have tracked it down to do with X-button, as that's one of the few apps that is installed without customizations in both Sleuth and vp3G (and I run it in Schap 3.60a). My next step is to run vp3G 3.60 lite, without X-button, and see if that really solves my problem.
edwinyuen said:
I've had this same issue for weeks now, ever since the newer ROMs have come out for the official releases (i'll have to track back the build numbers). I had it with Sleuth's last release, the vp3G 3.0 release, and now Schap's 3.60. I've done what other posters have said and hard reset, not loaded any apps, and still have the issue.
I believe I have tracked it down to do with X-button, as that's one of the few apps that is installed without customizations in both Sleuth and vp3G (and I run it in Schap 3.60a). My next step is to run vp3G 3.60 lite, without X-button, and see if that really solves my problem.
Click to expand...
Click to collapse
As a follow-up, I went to VP3G 3.60.1 install, ran the base install with nothing else installed and still had the problem. Still, the workaround suggested by others (putting the phone in standby and coming out) fixes the issue for me.
Hi all,
I've just done a search on this and have found a few posts but none with a conclusive answer to my problem.
I have upgraded to Schaps 4.x ROM and all has been fine for a good few weeks, then without [knowningly] changing anything, the phone has stopped ringing or vibrating no matter what ring tone/type I select. I still see the pop-up of the name/number of person calling but no sound whatsoever.
When I play the sample tones (using the play button in sounds & notifications) the ringer plays fine. Also other notifications (SMS, Email, etc) seem to be fine.
Anyone experienced this and found a solution?
Many thanks.
Now thats a coincendence as I'm seem to have extactly the same problem.
Not all the time thou and I have recently flashed my phone with Farias new rom.
I couldn't be bothered to diagnose the problem any more than I have already have so just did a hard-reset and finished installing my apps. I forgot to create a working back-up before and will do one this time!
It would still be good to know if this problem does get resolved.
yes, i have the same problem with
Shamanix`s WM6 Ultimate v2, which is based on Schaps 4.x ROM i presume.
so it looks like a bug in the OS itself, or maybe something in Schaps Advanced Config Tools.
because sometimes Vibration starts working (sometimes for a couple of hours, sometimes just until the next call, sometimes for a couple of days) and then it doesnt work again.
frod.mrv said:
yes, i have the same problem with
Shamanix`s WM6 Ultimate v2, which is based on Schaps 4.x ROM i presume.
so it looks like a bug in the OS itself, or maybe something in Schaps Advanced Config Tools.
because sometimes Vibration starts working (sometimes for a couple of hours, sometimes just until the next call, sometimes for a couple of days) and then it doesnt work again.
Click to expand...
Click to collapse
Actually, sorry, my mistake in my original post, I used to have the Schaps ROM but then changed it to Shamanix one too- based on Schaps though like you've mentioned.
Anyway, I got just a bit annoyed with it and like I said, did a hard-reset. I re-installed all the same apps and no problems so far. Not sure what triggered the problem though.
the same problem exactlly, I flashed Faria - the last -I think it is a 6.1 error
Phone ringer resets itself to silent.
Just to be clear about the problem I am having, my phone periodically turns off the ringer and vibrate and goes to silent without any prompting.
I first noticed this when I flashed to a Faria's first 6.1 rom. It was suggested that the Home "profiles" tab had something to do with this. Apparently the "Auto" switch in the profile tab is supposed to turn off the ringer during appointments. I have not ever used the profiles, and in fact I usually disable the profiles tab in HTC home. Also at that time, I found that the ringer would be randomly turned off even when there were no appointments scheduled.
I switched to a 6.0 rom and continued to have the same issues. I have flashed a OEM rom and reflashed the newest Faria 6.1 rom and I am still having the ringer turn to silent, however now it does seem to be primarily when an appointment is scheduled, though I have never set it to "Auto" in the profiles.
Does anyone have any suggestions on how to stop this? It is frustrating to be missing calls every day.
seems it is a very old problem:
http://forum.xda-developers.com/showthread.php?t=279920
maybe it is something with Hermes hardware problem?
another thread about it:
http://forum.xda-developers.com/showthread.php?t=288728&highlight=mute;+no+sound
mostly everybody who has this problem start having it NOT after flashing\updating software, but after sometime of just using a device. so it SEEMS to be a hardware problem with some contacts, which brake\disconnect cuz of vibrations and\or just oxidation\corrosion.
I have the same problem, and I don't think the above threads are the same thing. The ringer just doesn't work for incoming calls, regardless of which ringtone I use. I have it set to ring and vibrate, and up until a couple days ago, it would at least vibrate, but no ring. I was ok with that, but now it won't vibrate. I do get the voicemail notification sounds, and I get sound for incoming text messages. Vibrate also works with text messages and such.
And now that I'm typing this, I just received a call, and the phone vibrated! It was set to ring and vibrate, though. At least it's vibrating again, but I miss my ringtones!
I'm running K's rom version 1.31 right now, but I'll be installing K's final rom as soon as the download finishes. I also plan on installing all my programs one by one and soft resetting in between. Hopefully if it's a software conflict causing this, I can narrow it down that way.
xviiivx said:
I have the same problem, and I don't think the above threads are the same thing. The ringer just doesn't work for incoming calls, regardless of which ringtone I use. I have it set to ring and vibrate, and up until a couple days ago, it would at least vibrate, but no ring. I was ok with that, but now it won't vibrate. I do get the voicemail notification sounds, and I get sound for incoming text messages. Vibrate also works with text messages and such.
And now that I'm typing this, I just received a call, and the phone vibrated! It was set to ring and vibrate, though. At least it's vibrating again, but I miss my ringtones!
I'm running K's rom version 1.31 right now, but I'll be installing K's final rom as soon as the download finishes. I also plan on installing all my programs one by one and soft resetting in between. Hopefully if it's a software conflict causing this, I can narrow it down that way.
Click to expand...
Click to collapse
same here.. i already try installing a few diff rom.. but it still cant fix the mute problem.. can anyone else help us? hmm
I got K's final rom installed, and I finished installing all of my crap. My ringtones work fine now. I have to say, I wish I would have installed this rom earlier; it's much faster. I think I'm going to backup my registry now, so if the ringtones do quit working again, I can at least prove whether or not the registry had the problem. I'll update if I learn anymore about this.
Like I mentioned in a earlier thread, I installed Shamanix`s WM6 Ultimate v2 ROM which was about 5 weeks ago; ringtones were working perfectly and all of a sudden they stopped.
I'm not sure if I did 'something' by accident to cause this problem. But having reflashed using the EXACT same ROM and apps, the ringtones are working fine again.
I don't get my texts while my screen is off. Once the screen is turned on, they come through, but not while off. HELP!
Kidmet said:
I don't get my texts while my screen is off. Once the screen is turned on, they come through, but not while off. HELP!
Click to expand...
Click to collapse
Same problem here. I'm running 6.5 WWE
Same problem here. ATT Stock ROM. I do get my messages sometimes when my screen off but most of the time I'll turn on my screen and i'll get 2 or 3 sms messages at once.
imeraz said:
Same problem here. ATT Stock ROM. I do get my messages sometimes when my screen off but most of the time I'll turn on my screen and i'll get 2 or 3 sms messages at once.
Click to expand...
Click to collapse
Hard reset worked so far.
Kidmet said:
Hard reset worked so far.
Click to expand...
Click to collapse
Nope not for me.
I havent notcied that problem with mine. Also att stock rom on the tilt 2 only have the newest radio installed 4.4.9 (i think it is). and no issues with sms or mms not coming in when the screen is off, never noticed an issues before updating the radio either though.
Try this: Start > Settings > Sounds & Notifications > Notifications > Event:
Reminders > check "Display message on screen."
new text message > check "Display message on screen."
new MMS message > check "Display message on screen."
Ect ..
Also .. try this cab ..
I spoke too soon. I have recently been encountering this ever since I flashed the htc stock rom 1.86.401.0. it doesnt happen often, but it has caught my attention. before it would come thru with the screen off and when it did come thru the screen wouldnt turn on which was great, but now sometimes it will come thru and sometimes it wont until I turn the screen on, and I have events notification unchecked, I like the idea that the screen doesnt come on to avoid accidential touching of the screen when in the clip. So has anyone found anything to make it stop? Using tilt 2 on ATT.
this sometimes happens to me but a soft reset helped a bit i have no clue as to why this happens but id like to get an answer if anyone can post back
same thing had happened to me. i found out it was the new pocket shield that i was running that kept me from getting the they r suppose to come in.. hard reset will kill it and should b up n running... im on sprint running stock rom!
Werll I dont have the pocket shield. And mine started doing it after flashing the stock rom on HTC site for EU. So I know its not any programs I put in or any custom roms. I think what happens is the radio possibly falls asleep at times and doesnt wake up.
this happens to me as well, but not all the time. Im on official WWE 6.5 Asia ROM.
Strangely, this happen whenever i use custom ringtones (not from windows). Whenever i switch to any ring from windows, the message comes all the time. Can anybody confirm this?
I have the same problem. I have an official Eastern Europe ROM 1.86.401.1. (clean install, no third parties soft installed).
The problem appears even with windows ringtones. I hope there will be a hotfix soon! All my friends think I am ignoring them
grizzy12 said:
I have the same problem. I have an official Eastern Europe ROM 1.86.401.1. (clean install, no third parties soft installed).
The problem appears even with windows ringtones. I hope there will be a hotfix soon! All my friends think I am ignoring them
Click to expand...
Click to collapse
Same here. but I also found another bug, I know I should make another post, but I think XDA will kill me
But if you happen to notice that along with this, you will notice that at times, the txt will come thru but you get no alert. And I am using the same rom your using. Its been happening since this rom, and also happens with nrgz rom so its specific to the rom not the tinkering. But I was txting someone today and after about the 3 or 4th interchange I noticed the person hadnt txt back in like 10 mins, when I turned the screen on there was a txt msg that didnt notify me, didnt turn on or alert me, so there seems to be two bugs with it.
Unless anyone has looked into this, I am going to look further and see if this is only when using HTC's enhanced msg program, if it happens thru WinMO going thru all messages. I'll let you know unless someone has looked into this already.
grizzy12 said:
I have the same problem. I have an official Eastern Europe ROM 1.86.401.1. (clean install, no third parties soft installed).
The problem appears even with windows ringtones. I hope there will be a hotfix soon! All my friends think I am ignoring them
Click to expand...
Click to collapse
so far im using the ringtones that is provided by default from the windows and everything is good. Will report back though if i do find the problem again.
Oh and btw i had the stock 6.1 WWE Asia ROM before i upgrade to the official 6.5, the 6.1 behave the same way too. Perhaps it is the manila messaging that cause the problem
edit: I contacted HTC via email and they said that they "have no special setting" for this isssue. They suggest me to perform a hardreset. I replied back, "i have and the problem still exist". I'll see what they send me tomorrow and i'll share it with you guys.
I do suggest that we all report this bug to HTC via their email customer service thing so that they recognise the problem and release the hotfix.
mr_sheen said:
edit: I contacted HTC via email and they said that they "have no special setting" for this isssue. They suggest me to perform a hardreset. I replied back, "i have and the problem still exist". I'll see what they send me tomorrow and i'll share it with you guys.
I do suggest that we all report this bug to HTC via their email customer service thing so that they recognise the problem and release the hotfix.
Click to expand...
Click to collapse
I think they are going to have a difficulty with this one because its not repetative and is intermittent. I can say I never noticed this with the HTC Fuze and dont think I ever had this problem.
And being that it doesnt happen often enough I dont think people are going to catch it and they are going to think that they just didnt hear it, unlike us nuts
Hi guys i have posted this on another thread but it has similar symptoms, below is what i have posted in the thread.
I am having a problem with the notification system.
Lets say a person Name "A" sent me a sms, the phone will ring and the light blinks if i did not attend to it.
However the problem starts whenever I replied "A" but left the phone in the TF3D threaded msg screen with "A". After sometime the phone goes to standby. But when "A" replies my msg again, they phone only vibrates and does not ring. The Yellow Led does not blink as well.
I am currently using a stock ROM and i am not sure if you guys experience this as well.
This is Rather annoying as most of the time after replying a person's sms, i would just hit the standby button straight away without bother exiting the threaded sms screen. But if i do that, the next sms that comes in from the same person will not ring or trigger the LED.
I am not sure if this problem has been posted and fix, but after many days of searching i cant seem to find a solution for it.
some basically it means the notification did not come through only in the manila threaded msg screen with the specific person, because i guess they somehow got tricked to thinking that we are actually reading the msg when in reality the screen is off and we are not reading it. Please Check if this describe your problem.
I still need a solution for this
pukipuki,
Seems based on what your saying this might be the htc manila msg program, can you confirm if the same happens if you go to all msgs and bring up the person your talking to thru there and see if it happens that way too? My suspicision is that it wont do it, but I want to be sure, cause thats been my guess all along.
Or can anyone else confirm that it is only happening in the htc threaded msg and not the winmo threaded msgs.
My suggestion would be to try turning System Event Sounds on in the Sounds section in the Settings tab in TouchFLO/Sense. (Alternatively you can acheive the same effect by ticking the Events checkbox in the Sounds tab in "Sounds & Notifications" in Settings for WinMo.)
I came across the 'no sound alert' problem for new texts and found that the audio alert tone came back when I made the above change. (Funnily enough when I was having this problem, I had enabled vibrate for new texts and the phone vibrated even though there was no audio.)
Even with that setting on, the problem still exists.
HTC desire freeze/hang after receiving a voice call.
When I receive a voice call then I see following strange behavior:
- Ring tone goes, but it stops after a few seconds.
- I can answer the call, but when the call is ended then my phone hangs/freezes.
=> I have to remove the battery...
Are there people with the same problem? Or is this already posted somewhere with cause and fix?
I'm using the oxygen ROM on my phone, but I also saw this with CM MOD7.
I have a screen protector foil on my phone, is this the cause? (I read this somewhere).
I can't remember that I had this problem with the RUU rom.
Br
Same thing here...
Every beautiful rom tried, ended up with freezes or black screens. Phone does not ring, even if the caller sounds like it would.
Saw this tip here, which I have not tried yet, but I will do.
My phone is a pvt4 and some guys (I hope you not see this as politics) here have a strong dislike for rom manager.
h**p://androidforums.com/desire-all-things-root/356192-warning-do-not-use-rom-manager.html
So, I am flashing know and report back in a few days. (Usually first days things seems right, but after a while I end up with a useless phone, flashing back to ugly RUU.
I will use (AmonRA Recovery image) with unrevoked and then re-try flashing RevolutioN.xMas.Edition.v3.0.A2SD2B-signed
My brother has the similar problem
He finds his Desire GSM screen black, and not reacting to the buttons. he has to remove the battery and turn the phone on. this is happening on recieving calls and on custom roms, as we saw, on any rom that we tried. it's not happening on stock rom, but we want to have an solution where he isn't limited with the internal space.
i look in the forum, but does someone have and advice how to use stock rom with enlarged space? like stok rom with app2sd or another similar rom (maybe i didn't write the names correctly)
thanks in advance for your help and advices