GPS not working (isn not visible for any programs) after soft reset or shutdown and again power up SPV M650 this is happend on all rom It helps only flash Original French Orange ROM. On the next shutdown device or soft reset GPS module not work again. Please help me.
dominenator said:
GPS not working (isn not visible for any programs) after soft reset or shutdown and again power up SPV M650 this is happend on all rom It helps only flash Original French Orange ROM. On the next shutdown device or soft reset GPS module not work again. Please help me.
Click to expand...
Click to collapse
what about after a hard reset?
still not working GPS start working only after flash original french orange ROM.
Related
i need the rom of the xda zinc, my zinc is not working proberly, and therefore i think a clean sweap and and a rom , will solve the prblem.
the following problems have occured:
keyboard does not function
camera icon is not in today screen or programs screen
camera will not start up
problems with charging
have to make to many resets a day
all these problems have occured and i hope somebody will help, btw, i have done several hard resets
regards peter
the netherlands
hard reset
volume-up + power + soft reset and seleck softkey left
good morning to everyone...
i write from italy..
i've installed a utility on my JAq3 and now it wont load.....
it is freezed on i-mate screen and doesn.t move.....
what can i do?
can i hard reset it?
please answer me...i'm without phone and i need it for working...
thank you in advance..
bye
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.
Worked like a charm
Thanks tomtom!
How to hard reset i-mate JAQ3?
How to hard reset my i-mate JAQ3 ?
which is send button?
which is soft keys?
pls help !!!
dear friends ,
my phone has shut down and only when you take out the battery and put it back in after which you press any button on the phone it comes on and shows the htc logo after which it displays the following
ipl 3.07.001
spl 3.07.000
gsm 02.69.90
os 3.7.0.0
remains on for about 5-6 seconds and goes off
have tried to enter the boot loader mode by pressing the record button and reset button but it continous to behave in the same manner as mentioned above .
also when i try to charge the phone it shows only a red light
hoping someone can offer a solution to my problem
thanks and regards
I'd also be interested to know about this as my MDA Compact III has just done exactly the same thing.
have you guys tried flashing...that could kill it if not done propertly....but i doubt,the led is on,splash screen appears...info appears...what were last few things you did
according to spl os and ipl you flashed artemis touch 4.02 if i'm not wrong...or maybe tom's v5...try reflashing the same rom or just try a hardreset
Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.
mrd5477 said:
Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.
Click to expand...
Click to collapse
well...if it worked i'm sure you installed some app or deleted some files...so the system doesn't work...
if so hr will help
dear friends,
took the device in for repairs the fault was with the power circuit board which had to be changed as`informed to me by the technician
i now remember a few months ago the power button stopped working and a few days before the phone went bad it would work intermittently but there was no spring in the button hence it would have to be pressed quite hard for it to work i feel that this loose power button caused the power circuit to fail also my sd card was spoilt and the same had to be replaced
cast me appx in usd 30 for the repairs
thanks
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks
Hi
I was installing new ROM WM6.1 on atom exec when it was rebooted after installtion it showed black screen and vibrating continuesly. as when I hard rebooted it after removing my phone battery and again press the power button it again show the black screen and vibrator continues it is not bootng up.
can any one help me please.
How can I reinstall the the old rom using usb
It was done after installing the rom WM6.1 20xxx Please help
help required....
Please help....
Thanks in advance.
dead recovery
try enter boot loader mode,
download clean rom from o2
find smwhare here : http://www.myxda.com/romupgrade.aspx
if cannot still, sell to me
hakru77 said:
Hi
I was installing new ROM WM6.1 on atom exec when it was rebooted after installtion it showed black screen and vibrating continuesly. as when I hard rebooted it after removing my phone battery and again press the power button it again show the black screen and vibrator continues it is not bootng up.
can any one help me please.
How can I reinstall the the old rom using usb
It was done after installing the rom WM6.1 20xxx Please help
help required....
Please help....
Thanks in advance.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
It´s always good to READ the Wiki