Develop Bugs

Flash update failed during update

I tried updating both the PDA ROM and the RSU.
The PDA ROM updated OK, to 3.2.17 and then I tried to upgrade the RSU to 4.21.
Basically I got to 1% loaded then got a message saying the Flash Update failed. The device re-starts then I get the same error.
Tried deleting the PROGRAMME B from the start menu, removing it then tryong again, no joy.
Any ideas?

Code:
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
HTH
Stefan

can't Upgrade to WM6 Help "ERROR [294] INVALID VENDER"

I have an official WM5 HTC ROM (the last version) installed in my device and when I try to upgrade the new WM6 ROM the RUU program say this "ERROR [294] INVALID VENDER". and the uppgrading finish.
My device was "CID unlocked" (pod) by an USPL tool but it,s not a free device (it,s a Movistar device).
Questions:
I need other CID unlocket tool to install WM6?
If my phone operator is Movistar can,t I upgrade to this WM6 ROM?
Repeat with the last htc WM5 ROM I haven,t no problems for upgrade after make the CID unlocker.
I try make a HR firdt but I read allways "ERROR [294] INVALID VENDER ID"
Thanks and best regards for all.
sorry by my bad english. From Spain Jose.

Yes, you need to make cid unlock first.

Try to download a rom from Tom Codon like Black&Blue 4.1 WWE and do a CID-unlock with his USPL included in the download files from the rom. Then when finished unlocking, try to flash your rom again.
Good luck!

Please help ROM Update corrupted

Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please

run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .

lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps

error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270

goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...

Flashing ERROR

I need help with flashing!
I have HTC Trophy (DE-Vodafone)
Software: Windows 7
OS Version: 7.0.7392.0
FW revision number: 2250.21.12200.162
HW revision number 0003
Radio software version:5.69.09.05a_22.50.50.21U
Radio Hardware Version: A.102.D4
Bootloader version:5.0.2250.1(130781)
Chip SOC version:2.2.5.0
and i can't flash any ROM.I Tried many of them but still nothing,
flashing software writes me:
ERROR [226] FLASH WRITE
Flash write error happened,please check your PDA phone.
Where is the problem?!
please help me!
Or which ROM i need?
i need any pre-NoDo ROM,because i want load HSPL and SPL-5.0.... isn't supported

Help needed to upgrade firmware k012

Dear friends,
I need your expert help, please.
I am trying to resurrect a Fonepad 7 model K012 (SKU WW) so that my wife can use it as a spare tablet.
I have managed to soft-unbrick it and now it runs firmware version
JSS15Q.WW_fonepad_S-10.32.1.31.2-20140721
I am trying to upgrade its firmware to the latest available firmware for this model, which, for what I see in the Asus download page is
Version WW_12.8.1.38
2015/10/19
If I follow the official update procedure of downloading the firmware and saving it in the SD card, the notification pops up correctly about a fimware update file being available. However, when choosing to update the fw through the UL-K012-WW-12.8.1.38-user.zip file the tablet restarts in "Installing system update" but then every time it throws an error around 25% of the blue progress bar, with no further explanation apart from "System update failed, previous configuration restored" after rebooting.
If, instead, I use the cwm recovery to flash the same file UL-K012-WW-12.8.1.38-user.zip from external SD I get this error:
"Can not upgrade from JB , this is a "4.3"
Error in /external_sd/UL-K012-WW-12.8.1.38-user.zip
(Status 7).
The same errors are shown if I use an earlier version of the firmware...
What am I doing wrong?
Thanks for your help.
Kind Regards,
Fabio