Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
i tried to do a beasty wm6 rom update, everything went well, and at the end of the procedure, it ask me to "press 0 to restaure factory setting" for rebooting, i press 0 and then....nothing. Impossible to start the htc, i can only access bootloader mode, but ain't no more recognize by the pc, i tried to plug it to AC power as i thought of a battery prob, and still nothing, no start, and no led telling me that it's recharging...
i ve done some search on the forum, but can't see something similar to this.
anyhelp welcome
regards
Hi,
did you try to downgrade it to WM5? I also had problems with WM6 and after a downgrade to WM5 it worked again.
Cheers
Michael
sorry wrong thread.
well now when i connect it to my pc it says unknown device, so i dunno how to reflash to wm5
im on vista 64, and when i try to install the 64 driver it gave me on error about a corrupted driver...
Hi
I have the same problem,cannot recognize the usb port.
Anyone has an idea??
try changing your cable and if possible try using a xp machine. i have heard of people having problems when flashing with vista (i did it and no problems)
If after you change the cable, and use a differente computer the universal when you put it in bootloader mode and the word SERIAL does not change to USB i would say its pretty much bricked but if you only flashed your device i would say it is still possible to bring it back from death.
try changing your cable (specially if its the one you usually use) im almost sure thats your problem.
also make sure you dont have the sd card or the sim in it that seems to help too.
best regards and best of luck
Erik
luxeomni said:
im on vista 64,
Click to expand...
Click to collapse
Thats your problem! Vista is very shaky at best with flashing via USB on HTC devices.
Reflash to WM5 using the SDCard method.
Psi
this worked for me
follow the directions on this thread it worked for me http://forum.xda-developers.com/showthread.php?t=291723
Can any one help with this?
My Diamond has developed the short battery life/over heating problem, along with the USB connection having failed.
So I put the ROM back to the standard T-Mobile one via Wi-Fi to return for warranty repair.
However, I forgot to change the SPL back, so they are refusing to sort it.
My next thought was to get HTC to repair it, but thought I'd best stick the T-Mobile SPL back for good measure.
But the update failed (tried more than once) and I'm stuck on the bootloader with "Upgrade ROM Code Error, Please Try Again" and only "Serial" showing as a connection option, no USB (yes with a cable connected to a PC).
Is there anyway at all I can get to Internal Storage to try another update?
Thank you.
hello,
i had a similar problem. after flashin a buggy rom the diamond made a reboot and hang at the initializing screen. i tried a garanty repait but htc saw the spl and denys my garanty. so i started to ask google for help.
i got the device in bootloader mode, showing "serial". but i got no active sync connection. but after any tries i got the firmware update tool into "usb" mode and was able to flash. now my diamond is still alive.
maybe you have to play a bit to get it workin..
wish you luck..!
Try with another usb cable, computer. And explane me this
So I put the ROM back to the standard T-Mobile one via Wi-Fi to return for warranty repair.
Click to expand...
Click to collapse
How you can flash rom via wi-fi :S
I've tried 3 PCs and as many USB cables, it appears to be a hardware fault tied in with the overheating...
And sorry, I didn't explain very well regarding the Wi-Fi.
I simply used that as a file transfer method as I couldn't connect via USB. Saved the SPL as diamimg.nbh and did the Vol- + Back reset.
Understand now. Maybe usb connector is damaged by overheating or something else. I can't help you anything because diamond don't have microsd card - can't flash via microsd method
Anytime I plug in the phone via the usb cable to my pc it just starts to charge and the icon only shows the charging icon. I have tried unchecking the fast sync option in USB to PC section but still nothing I have tried it on 3 different computers and 2 different cables and still no detection only the light starts to charge and the icon shows the charging plug. I also tried my headset and they get detected with no problem and work just fine. I also did a hard-reset so should I just call T-Mobile and get another one? or someone out there has a solution? Thanks in advance for any help you guys might be able to offer!
Which Windows do you have. I had the same problem on Windows Vista
I have Windows 7 and vista
If I have to send it back anyone know if I can relock the phone with out it being synced? I already have original T-Mobile rom on it just missing the splash screens and to lock it.
javiel said:
Anytime I plug in the phone via the usb cable to my pc it just starts to charge and the icon only shows the charging icon. I have tried unchecking the fast sync option in USB to PC section but still nothing I have tried it on 3 different computers and 2 different cables and still no detection only the light starts to charge and the icon shows the charging plug. I also tried my headset and they get detected with no problem and work just fine. I also did a hard-reset so should I just call T-Mobile and get another one? or someone out there has a solution? Thanks in advance for any help you guys might be able to offer!
Click to expand...
Click to collapse
did you make sure you have the latest version of windows mobile device center installed on your pc and the latest service pack for vista. not sure about 7 though. plugged mine in for the first time and it came right up.
Try unistall all your USB drivers using this:
http://www.nirsoft.net/utils/usb_devices_view.html
and than plug your phone in
i have this exact same problem and cant connect in disk drive, active sync, or interenet sharing. i think its a problem with a bad hardspl flash but since i cant connect and sync the phone I cant reflash the spl.
this sucks. no way to recover from this i believe.
Is it possible to SPL from the SD Card? Espically after you have allready done the SPL from the PC? Check the thread, I think you will find it is possible. If not they might be able to send you a new image file...
Good Luck!
Is it possible to SPL from the SD Card? Espically after you have allready done the SPL from the PC? Check the thread, I think you will find it is possible. If not they might be able to send you a new image file...
Good Luck!
sphinx88 said:
Is it possible to SPL from the SD Card? Espically after you have allready done the SPL from the PC? Check the thread, I think you will find it is possible. If not they might be able to send you a new image file...
Good Luck!
Click to expand...
Click to collapse
thats what i was wondering. but is there a spl .nbh file around here?
hey sphinx, also whenever i plug in the usb cable to the charger and plug it in, i get the usb to pc pop-up as if i plugged it into the pc, do you have this as well, and cant seem to charge past 49% capacity.
Just tried the usb driver removal but that didn't help either I tried on 4 computers now and all do the same the phone just goes into charging and the computer never sees it this really sucks... I HardSPL my phone as soon as the HardSPL was available and everything was working fine but now for some reason it just stopped working.
Stalix said:
thats what i was wondering. but is there a spl .nbh file around here?
hey sphinx, also whenever i plug in the usb cable to the charger and plug it in, i get the usb to pc pop-up as if i plugged it into the pc, do you have this as well, and cant seem to charge past 49% capacity.
Click to expand...
Click to collapse
Try posting to the SPL Thread... I am sure you will get a better response.
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1