Develop Bugs

Touch Screen Problem

Hi All,
I am using an IMATE Pocket PC 2003 since the last 6-8 months. Over the last few weeks I am facing a problem with the Touch Screen. ALl of a sudden the Touch Screen fails to respond although the buttons are still working.
Sometimes after several reboots, the Touch Screen responds sometimes it doesn't. Sometimes I just keep it IDLE for 2-3 Hours and the Touch Screen starts responding. There is no fixed time of the error also the error is random. Sometimes everything is normal for one week and there is no problem at all. Sometimes the problem persists continously.
I have Hard Resetted it atleast 4 times but the status still remains the same.
If anybody has experienced this, do share your thoughts.
Regards
Jinesh

I read somewhere that if you re-align your screen it may help.
Do your hardware buttons still work? You could try mapping tpenable.exe to a hardware button and select this when the screen locks up.

Touch screen problem
Jinesh,
did you ever manage to fix this?? This is exactly the problem I've been having on my MDA Compact (Magician) for ages: screen unresponsive, buttons still working. I started a thread on this topic as well and got some suggestions, but never managed to sort it out. I'm a bit wary to resort to flashing a new ROM or something like that since it seems to open up a whole new set of potential problems and will cost me my warranty with T-Mobile at the least (Not that they're much help, but still)...
Thanx,
Joost

Maybe the cover
The Qtek9090-screen is sometimes locked (e.g. when it's in a car holder which causes too much pressure on both sides of the display.) The same happens sometimes without any cause - pressing on both sides unlocks the screen.

Hi,
I am using an O2 Mini now and have sold off that Imate. But what I came to know that the touch screen problem was due to the irregularities in the network. The screen stops responding fast when network is weak and the device keeps on searching the network.
I have faced this problem once or twice in my O2 mini also.
Regards

Jinesh, I don't know if you checked out my thread on this, but indeed this is the conclusion I've reached: bad network causes the unresponsive screen. I think it might have something to do with the priority windows gives to the screen routine compared to (searching for) network. As of yet I have been unable to find a way to increase priority for the screen or lower it for network, though I browsed through the registry pretty extensively. Suggestions from anyone on this would be most welcome.

Random power-offs? wtf?

I've been running Black 1.2 for some time. Love it. Never soft reset. Only hard reset it once. I'm using a Cingular 8525. What's weird is that it powers itself off randomly lately. 3 times in a row. It was pretty hot outside when it happened, so don't know if the heat caused it, but the screen would just die and turn off. Anyone have this happen? Any ideas as to what causes this powering down? The battery is full. It was just super hot out? Hmmm.

I would suggest you upgrade to a newer rom dude
take a look in my guide thread which has the latest ROMs listed.

mrvanx said:
I would suggest you upgrade to a newer rom dude
take a look in my guide thread which has the latest ROMs listed.
Click to expand...
Click to collapse
I considered it, but since Black 1.2 was released, I never had a problem with it. Very stable. Could it now after all this time just all-of-a-sudden cause random power-offs? Also, I noticed the device likes to power-off when I slide the qwerty keyboard out and lock it in place. Not every time I open it, but it has happened a few times now. ROM related? Let me know. I'll probably up to a newer ROM tonight.
Thanks.
-fin

Ok, update: Seems that EVERY time I slide out and lock the qwerty the device shuts off when I go to reply in a messgae using Palm SMS Threader. Is it the device or the app?

I had the same problem with my old JAMin (Prophet). I would keep the phone in a case and then wonder why I wasn't receiving any calls, then check and see the phone having turned itself off. Reloaded it with a different ROM and the problem went away.

Yeah, that's happened a bunch of times now. Just recently did I hard reset my device, and all was running great like before. Just all of a sudden am I having this issue with power offs and the qwerty kicking the phone off when I open it.

I have the same problem and I have come to one conclusion because I can repeat it.
If you are closing or opening the keyboard, but you do it quickly (like slamming the keyboard shut or open), it will turn off. Also, if you squeeze it while it is closed, it turns off. And I have made sure im not hitting the power button.
Try it and see what happens.

Yeah, it does it when you slide it out really fast. Noticed that. Haven't been able to repeat it every time, but the times it does shut-off, its from sliding it open fast. Now to understand why this happens, since it didn't do this in the past.

Phone will not come out of standby

hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.

no one seen this then I guess.
Bummer (for me!)

Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset

softreset helps, sometimes i have the problem with windows mobile 5 too

jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.

Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started

P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.

thanks guys.
I'm going to try the hard reset route-I'll report back.

Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)

Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.

I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..

same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.

Same problem here...
Still no solution?

I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.

Tilt 2 has narcolepsy

I don't know how it started but my Tilt 2 keeps falling asleep (screen off) after 5 seconds. This happens whether it is plugged in or on battery. The only way to stop it is to open Google Maps (I think Google Maps prevents sleeping on purpose) but as soon as Google Maps looses focus (even opening the Google Maps menu), after 5 seconds the phone goes back to sleep.
I have turned off all the power settings to no avail. I have been using SU2U lock for over a month with no problems. The last change to the phone was installing Gyrator about a week ago but this still occurs even with Gyrator not running.
Help!

One additional bit of info. It goes to sleep even if the phone is not idle. I could be in the middle of clicking something and then...LIGHTS OUT!

are you accidentally hitting the power button by any chance, particularly when the hardware keyboard is out, this is happening to a lot of people
(there is a cab fix for this by h andy)
edit... i just noticed you said its happening at 5 second intervals. obviously that cant be the power button issue.

Mine did too
My tilt 2 was doing the same thing.
I was worried that I had a bad phone.
I was on NRG's 4 dec 21XXX when this was happening. I reflashed twice, and still the same problem.
Reflashed to the 10 DEC 21XXX and it went away (well as for one day that is)
Phew!!!

Ugh. I was hoping reflashing wasn't the solution. I am still using the stock ROM with a bunch of software installed.

At least I am not crazy. Someone else is having the same problem on their Diamond 2.
http://forum.xda-developers.com/showthread.php?t=558904

I have found that the placement of the lights out button is very very bad for typing with the physical keyboard, I am still relearning how to keep my knuckle away from it.

Update on this problem. I removed Smart Lock and soft resetted a few times. So far so good.
I am not accidentally hitting the sleep button.

[Q] Sometimes my touchscreen stops working

I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?

spanielhead said:
I have had my Moto 360 for just over a week. For the second time the touchscreen stopped functioning. First time I resolved by turning it off (very long press hardware button) then left overnight and it was fine in the morning. Turning it off and back on again didn't help. Couldn't factory reset because no touchscreen.
Second time is now.
Does anyone else have this problem? Any clues how to resolve?
Thanks.
Edit: After left off for a while (instant off and on doesn't work) it is fine now. Anyone have any clues or better suggestions how to fix?
Click to expand...
Click to collapse
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.

teslabe said:
Yes mine has done it two or three times since the last OTA update, nothing I did to the screen had an effect, had to reboot the watch to recover.
Click to expand...
Click to collapse
Mine doesn't recover immediately on a reboot but it is nice to know I'm not alone in the problem. It's better to know that you've only had this problem since the OTA. That means it can be fixed in software. Thanks.

Same here
Lost "touch" today on mine. Had the 360 for about 4 weeks and not seen the problem until now. Wasn't even sure how to turn it off until I saw "very long press" - thanks!
Turning mine back on straight away was fine so it was just a turn it off and back on thing. Frustrating, but I'm glad it's a software bug rather a touch screen fault, that would be a real pain. Hopefully, if it's a bug it will be fixed.

i think.....
I think this happens when the moto 360 is not set on your wrist

Ddoes anyone solve this issue ? My new moto 360 touch screen doesnt work at all. So i can choose any language in initial setup

This problem Occurs when no static energy is given to the case of the moto360. As soo'n as You touch The Iron ring The touch Will work. Release it and it Will stop working. Ik think The touch screen works rather like a conductive layer between the back of the watch and the screen it self in which the skin gives the energy needed to control the screen. When the back of the watch isn't connected to skin the touchscreen completely stops working.
In video you see what happens
https://youtu.be/KpQ-dqWYO6s

Mine did this too, however I broke my screen ordered a replacement and haven't had the issue since. When mine quite working if I triple pressed the power button it lock the screen then pressing the power button it would turn on and work though. Sometimes it wouldn't come right back on like it froze or something.
Sent from my Nexus 6 using Tapatalk

I've been having this problem too, it's more like my weekend watch but last week i noticed that it wasn't responding and i thought it could be a RAM issue. I've done multiple reboots and it doesn't work.
There was only an occasion where i left it overnight till it almost drained completely and it worked again, and then it started freezing again.