I've tested the new BT Stack upgrades for both Imate and Qtek. I know that these upgrades where designed for the Imate (PDA2k) and the Qtek(9090). But I thought since both the xdaIIs and xdaIIIs share similar bluetooth hardware then the patches should work and upgrade the xdaIIs as well. Turns out that something inside thses patches is not right. :?
After installing them seperatly on my xdaII, they screwed up the device to a degree that forced me to do a hard reset to get it back to working condition. After installing the new patches, and after restarting my xdaII to take effect, the device just got stuck at the boot screen with the backlight off. Both versions, the imate and qtek, showed similar weird behavior :evil:
If we can get an expert's opinion on this we might be able to get this new patch working on our xdaIIs. 8)
Good Luck u guyz
I have these patches working on several phones by removing some hardware specific stuff unrelated to the stack.
See this thread.
http://forum.xda-developers.com/viewtopic.php?t=14329
(Apologies for the awful wordplay).
I have recently bought a TomTom Navigator 3 package from t'internet, but am having major problems trying to install it.
Setup:
ActiveSync 4.0
WinMob 5.0
TomTom ver: 3.07
It keeps on coming up with the applicvation error ('needs to shut down')
The only thing I can think of is that it is a big old file, but then, I only have Skype installed on my Jasjar, aside from the as-standard progs, so could anyone guide me to a more righteous path?!
Hi,
Tomtom 3 will not instal on to WM2005. It will, however, work on WM2003. Although there are some convoluted work arounds to get TT5 onto WM5 you are best to get 5.21, the latest incarnation that will install without a fuss.
Speaking recently to TomTom I was told that TomTom 6 will be out this summer. Exactly when is unknown but it already ships with TomTom Go packages.
Regards
Kevin Griffin
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
Try a search on the Hermes forum. I found lots of stuff.
I found THIS ONE . But there were MANY others. Some users reported success with some ROMs.
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
I have 2 Varios II and I can admit that I had some issues with TT6 with WM5. TT liked to freeze when I was typing in the address or browsing through menus. When I changed to WM5 AKU3.2 it was better, but still not perfect. Eventually, it was WM6 that helped me. Now TT6 is running without any issues (of course it can freeze from time to time when I have too many programmes running in the background). Just try any of new WM6 and everything should be fine.
I had TT5.21 which people said run fine which didnt on wm6 but TT6.1 works fine
Long time since i've been on here but while i was browsing about, i saw this problem. All i can suggest is using the inbuilt GPS and see how that works? I have TT6 as well and i have used it perfectly well on an XDA Mini, XDA Orbit, SPV M700, HTC Touch, HTC TyTn II... seems a bit odd that you're having these problems. Have you since cured the fault or is it still being a bit of a ****bag?!
While i'm here... anyone got the latest maps at all for TT6? Shout me on [email protected] if you have any info on TT6 or need any PDA / Pocket PC help.
Griz
ibanyard said:
Don't fret, it works fine on mine... Are you running a WM6 image - you may wish to upgrade to wm6 if you're not. (or downgrade to TT5.....)
Treat the issue as 2 separate problems, bluetooth related loss of GPS unit, and the stability of the TT6 software.
There are any number of other applications that will let you connect and read signals from the GPS unit, try these to see if you have a faulty gps unit or if its TT playing up.
Once you're happy with this look at the TT issue.....
Click to expand...
Click to collapse
Yeah, I had established that the gps was working fine, I've been happily using it on my ipaq 2210 for ages. Then with the Hermes testing with gpsgate and some other stuff showed no problems.
The problem I had was that my TT6 was a 2GB SD card version and I didn't have micro SD big enough to test it. I had about 1hour to play with my friend's one and that's when I discovered the two problems.
He lent me the card to play with this evening and I've made a little progress now. I've sorted the flakey GPS operation, primarily by changing the com port, deleting the pairing and pairing again. So far that's not dropped out since.
Tomtom runs but freezes, this appears to be a confirmed problem which I hope that WM6 will solve as (mean-machine) suggests.
I feel a lot happier that the damn thing runs at least. The freezing appears to be related to cpu usage as I find that that zooming right out on a map is a good way to cause this to happen. The menu screens can be a problem too and the rest appear intermittent. As others have stated in other threads, hitting the red button and then switching back to TT will free it up.
I guess the next thing is to study the Wiki and try an make sense of the order things need to be done to put WM6 in, which Rom if any, which version of WM6. ... Information overload, so I think I need to take it slow and ingest the data .
Thanks for all the replys guys, it amazes me how much support HTC has and how many of you are passionate about them. Up till a few months ago I had never heard of HTC, now I doubt I'd consider anything else.
TomTom6
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
rbin said:
I have been using TomTom 6 on my Imate Jasjam (TyTn) both with WM5 and many versions of WM6. It works flawlessly never missing a beat. What com port are you using? Have you turned off secure connection?
Click to expand...
Click to collapse
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
todd_jg said:
@louiscar: a good place to start with upgrading info (to avoid the overload) is THIS SITE . Great guides that make it simple.
Click to expand...
Click to collapse
Great link, thanks Todd. Reading glasses are on already.
TT6 w/Pharos and Holux recievers work great
I've an AT&T Tytn upgraded to WM6 and have no troubles with my Holux or Pharos receivers and TT6.
Everything works great EXCEPT issues with data connections such as TT Buddies or traffic. This isn't unique to the PDA version of the software though, as I also have a standalone TomTom GO 910 paired with the phone and it works almost okay as a bluetooth speaker phone, but constantly has trouble getting a good data connection.
My $0.02
louiscar said:
Having just bought a Tytn I found that my tomtom 6 didn't work. I seemed to have two issues. 1) It hung up frequently and 2) It kept losing my external bluetooth GPS receiver.
I thought I'd go to Tomtom's page to see if there was a fix given that HTC mention this saying that Tomtom have updated version 6 for the device.
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
To my horror I I found this page which suggests that the device is not supported, never has been and never will be. The reason according to Tomtom is due to an agreement with HTC,
http://www.europe.htc.com/en/htctytn/support/faq.html?id=539&cat=applications
I am trying to catch up on this device so am swamped by data at the moment but this is a real blow to me as one of the main priorities is to run Tomtom 6. When I bought the device I assumed that it was just a pocket pc with a phone in it. Seemingly I am wrong as there appears to be differences with the hardware or Tomtom checks the device it's running on and presumably refuses to work properly.
Can anyone enlighten me as to how ( if at all to get around this issue). Currently my device still has mobile 5 but I am ploughing through the plethora of information on this site trying to figure out exactly what I should and shouldn't do. I've a lot of catching up to do..
Any advice / suggestions would be most welcome, it seems too strange a concept to be locked out of running a pc app just because of the hardware it's running on.
EDIT: Apologies moderator this probably shouldn't be posted in the wm6 thread even though I am intending to move over and would like to use tomtom on that. Please move it if necessary.
Click to expand...
Click to collapse
I have used TT6 on my MDA VArio II (TyTn) for almost a year...no problem. Now I have the TyTn II
Same here.. been using Tom tom 6 on my Tytn since the day i installed wm6, no problems here, works like a charm!
HEAT???
I have been using TT6 on my Imate JASJAM running the DOPOD WM6 ROM without much trouble (no hanging etc). The only problem I am experiencing is huge power drain and the unit being physically hot when running TT. Maybe this power drain and potential overheating can cause some units to hang and playup, or potentially any unit given the right environment!
Anyone else finding their units getting a bit hot?
I've been using TT6 on my Tytn (MDA Vario II) almost one year now. No problems. Started using TT6 while running WM5, upgraded to WM6 (schaps rom), reinstalled TT6 and it just continued as before. No problems, no hangups no freezing. I've been using all kinds of different charts with TT6, so I don't think the problem is with TT.
louiscar said:
Hi rbin,
I've currently got the GPS panel set to 'program port = com2', 'hardware port = com0' and my bluetooth gps is set to 'outgoing = com0'
Currently this works well so the GPS issue has been resolved.
Tomtom on the other hand freezes pretty much as described here:
http://forum.xda-developers.com/showthread.php?t=299892&highlight=tomtom+freezes
and in a number of other threads.
Click to expand...
Click to collapse
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
I have been running TomTom Navigator 6 on my JASJAM for some time. The hanging problem described is probably caused by having all the Points Of Interest (POI) active.
Go into the TomTom settings menu and de-activate ALL the POIs. Try it, then only turn on the ones you actually require.
oltp said:
Going to try your settings too, cause on all WM6 roms I tried I keep losing my GPS BT connection. I'm not damn sure it got nothing to do with TT6. But when I delete my gps and reconnect it while TT6 is up and running, TT will find the gps straight away. So imho it's the BT connection that fails and not TT.
It's really annoying though.
Cheers, M
Click to expand...
Click to collapse
Doesn't work either. Seems that after a soft-reset the BT connection with my GPS is f*d. Very strange because the BT headset doesn't suffer any of this. Maybe time to buy a new GPS, but with WM5 I never experienced this behaviour.
I found that with tt6 you need to have the WM6 internal gps settings set to "None" for both program and hardware port. Then make sure the box is checked in the last tab so it autodetects the com ports. Once all this is set and you goto add a bluetooth gps device in tt6 it gives you the option to use com port 0. select this port and it should detect your gps unit with no probs. Been running tt6 on my 8525 with tnt's latest cooked rom and things couldn't be running smoother.
Edit: On another note. I used to use Telenav with my 8525 with the original at&t rom. I had the worst luck with that application. I would constantly lose my gps connect and I almost always had to do a soft-reset to get it working again. It is quite possible that Telenav was not the issue and that the particular rom I was using had bluetooth connection issues that were resolved when I switched to a cooked rom such as the tnt one. So for those using tt6 with BT connection problems you may want to try a different rom and see how your luck goes.
Hi all, First of all I'd like to say this is the most informative forum I have been involved with . Up till now I haven't needed to post any questions.
Now....
I have an i-mate Jasjam herm200 (purchaced from Telstra). Until recently I was running WM5 which it was shipped with. Apart from the slow speed of the PPC (due in part to the Telstra Bloatware) it ran fine.
Since then I have tried many cooked ROMS inc. all Jasjamming's WM black editions, Most of Schaps WM6 and a few others, and I'm having problems with connecting my HS850 headset & my Altina GBT709 GPS receiver.
The Headset,
After pairing the headset I found that when making or receiving a call the person on the other end can only hear me for a few seconds but I don't hear anything, then when the headset Icon appears on the screen the call remains active but I can't hear the other person & they can't hear me.
I reflashed the Telstra Jasjam shipped WM5 rom: 1.31.305.2_106_6275_1.38.30.10_108_ship and the headset stilled didn't work , reflashed it with the same rom again (various WM6 roms in between) and it will work fine.
Can someone tell me if the problem is with the HS850 or the WM6 upgrade?
The GPS,
Since I have started flashing different roms I have never been able to connect the Altina 709 to TomTom Navigator 6, even when reflashed with the shipped rom. I cannot figure out if the problem is with the Bluetoth or a configuration issue with my PPC.
I can live without the GPS as I have a stand alone TT GO 500, but not being able to connect the bluetooth headset properly is driving me NUTS!!!
Please Please Please can someone help me figure this out.
Squirt
Any ideas people?
Don't know if this helps,but I found the Telstra customisations that you can install give me grief with my parrot car bluetooth system - they mess with the bluetooth stack in some way. I found the Telstra WM5 rom didn't play nicely either, which was my main incentive to upgrade to WM6. Are you using a clean install of the WM6 roms without tacking any of the telstra stuff on top?
I eventually found a .cab with just the proxy manager which is all I needed, and schap's roms work nicely for me regarding bluetooth, so I'm a bit wary of fiddling with it now.... I know the black series (and a few others that must have used the same build) had bluetooth issues for me.
Thanks for your reply, I'm currently running Black 3.0.1 which has been the closest I've got to getting the BT H/Free working.
With 3.0.1 I can hear the person on the other end through the phone speaker not the BT, BUT, They can hear me through the BT headset........strange.
I'm just waiting to catch up with a bloke from work with a different brand BT Headset to see if it makes a difference.
Can someone give a definitive answer to this, I am using an Orange SPV M700 which I have flashed with the generic Dopod WM5 rom Version 1.23.405.2.
I have tried various WM6 roms and have had the same issues with them all, I loose bluetooth pairing authority, the wirless keys are lost and Tomtom map activations are lost too.
Is there a way to resolve this issue as I see there are a lot of users with the Trinity and WM6 in signatures, so someone must be doing something right.
After having flashed my phone from WM5 to WM6, the tomtom ID of my phone changed too... Perhaps Tomtom's support will help you with that?
I have no problem with bluetooth...
It's not that, perhaps I should have been a bit clearer.
After flashing to WM6 & pairing across bluetooth for the activesync, connecting it to my wireless & activating the tomtom maps, give it 24hours or so and these details are lost. Although the bluetooth PC is still in the paired devices, the pairing code needs to be re-entered as does the wireless key if I try to connect to that.
The Tomtom map needs reactivating again also.
peterelliott11 said:
The Tomtom map needs reactivating again also.
Click to expand...
Click to collapse
I already read somewhere about this.
When you do some pairing with bluetooth and PC sometimes you lose the maps!!
Don't have further details though