Related
anyone have the keyboard fix in the wm6 where the @ symbol is the correct button it is on the keyboard?
luniz97 said:
anyone have the keyboard fix in the wm6 where the @ symbol is the correct button it is on the keyboard?
Click to expand...
Click to collapse
Edit the registry so you keyboard language will reflect your system language:
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal).
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
After changing these settings soft reset the device to make it work.
If you are using Cingular device there should be a CAB floating around, use search.
i tried to search...i used the cingular wap settings but didn't find another cingular cab...if you can post it here...it would be greatly appreciated...
i just tried changing the registry...to the english one...it doesn't work?
http://rapidshare.com/files/21995373/8525_Keyboard_Fix_WMXL.CAB
am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...
luniz97 said:
am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...
Click to expand...
Click to collapse
I am using Google to find what needed on this site. If you use good search query you will get better results than with integrated search (and usually it is faster too ).
luniz97 said:
am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...
Click to expand...
Click to collapse
A lot of it may be that we have read a lot of posts and happen to remember which thread it was in, however, I just did a search to see if I could find it.
"Cingular keyboard fix cab" is what I used. It was the third post down. When looking for a file, just click the little paperclip and it will show all the available files in that thread.
Much easier than reading 400 posts.
Enjoy the forum
Scrog said:
http://rapidshare.com/files/21995373/8525_Keyboard_Fix_WMXL.CAB
Click to expand...
Click to collapse
I downloaded this path but i am not sure what to do with them after extracting them. I am new to upgrading my hermes. I am running Schap's 4.31 rom. I am trying to get my keyboard to operate correctly. I tried a few of the ways above and have failed.
JD_5669 said:
I downloaded this path but i am not sure what to do with them after extracting them. I am new to upgrading my hermes. I am running Schap's 4.31 rom. I am trying to get my keyboard to operate correctly. I tried a few of the ways above and have failed.
Click to expand...
Click to collapse
You can use
1) advanced config to set the keyboard language
2) DONT extract the cab, just copy it to your phone, then click on it in file explorer, it will install then.
KarhU said:
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
Click to expand...
Click to collapse
I entered 40409 in "Decimal" and it worked after a soft reset.
Previously I entered 20409 and it did not.
Edit: I have some buttons which still do not work.
The ' and &.
Frustrating!
Yawn....
HTCustom took care of restoring my keyboard layout.
Thanks to the original coder of HTCustom....
Keyboard fix works on Touch Pro2!
Thankx Xaltotun!
what would be the code for a french azerty keyboard layout
Hi,
Is there a version of Dictionary Editor that works with WM6? And... how I can change the Dictionary language, I need to change only the dictionary, not any other thing, I mean, keyboard layout, etc. Is there a .ca for that?.
Regards,
Taguapire.
I am using the program/cab file I obtained from this site and it seems to be working well on vp3G's 3.0.
http://mobile-sg.com/ppc/apps/
Gator5000e said:
I am using the program/cab file I obtained from this site and it seems to be working well on vp3G's 3.0.
http://mobile-sg.com/ppc/apps/
Click to expand...
Click to collapse
Thanks for the app, but it didn´t show any dictionary, Like the other soft I don´t know if WM6 have other kind of file for Dictionaries...
Is there a well known app for edit Dicts on WM6?
May be I miss using this app, but it didn´t work.
Regards,
Taguapire.
taguapire said:
Hi,
Is there a version of Dictionary Editor that works with WM6? And... how I can change the Dictionary language, I need to change only the dictionary, not any other thing, I mean, keyboard layout, etc. Is there a .ca for that?.
Regards,
Taguapire.
Click to expand...
Click to collapse
Hi!
What dictionary u mean? WM6 has build in Eng. Dictionary “Input”. If u looking after x language I thing its best to search in this forum u can find it. Search X input X= your lang. I searched after Scandinavian input I got it
I hope u find it
I´m talking about new words added to dictionary throught the keyboard.
Regards,
Taguapire.
taguapire said:
I´m talking about new words added to dictionary throught the keyboard.
Regards,
Taguapire.
Click to expand...
Click to collapse
shoot
http://pdassi.de/util/getdownload.php/TextPlusPPC12.zip?id=59861
SORRRY taguapire the link is down. try this
http://www.smartcell.com/Web/pc-17-4-textplus-for-pocket-pc.aspx
Isn't this custom behavior? All words I write in Norwegian seems to get added to the dictionary, even phrases. This has been the same for all WM6 roms I've tried (Black Satin isn't one of them though).
laaban said:
Isn't this custom behavior? All words I write in Norwegian seems to get added to the dictionary, even phrases. This has been the same for all WM6 roms I've tried (Black Satin isn't one of them though).
Click to expand...
Click to collapse
I know it save and add all u typing. The issue is that the prgm ask u if u wona save the word or not u can always ignore that. “Det gäller skriva rätt ord”
Abo Forat said:
SORRRY taguapire the link is down. try this
http://www.smartcell.com/Web/pc-17-4-textplus-for-pocket-pc.aspx
Click to expand...
Click to collapse
I´ll try it, thank you very much!!!
Taguapire.
Great free program
Dictmgr, lets you edit and add to a number of ppc dictionaries
http://www.freewareppc.com/utilities/dictmgr.shtml
MHC48 said:
Dictmgr, lets you edit and add to a number of ppc dictionaries
http://www.freewareppc.com/utilities/dictmgr.shtml
Click to expand...
Click to collapse
Unfortunately DictEditor does not support WM6 yet. And WordCorrector will support WM6 only in the next version (which I hope to release soon). SpellChecker works with WM6 without changing anything.
Currently, one WM6 user is helping me to do some "detective" work and hopefully find out what file/database actually contains the word completion dictionary in WM6. Too bad I don't own a WM6 device yet, else the hunting/development process should be able to speed up.
i forget the name of the file in the rom but its a .txt file and its located near the preconfig.txt if you search a rom dump sorted by type. i have edited the text and it worked its pretty easy just need to dump the rom thats all.
austinsnyc said:
i forget the name of the file in the rom but its a .txt file and its located near the preconfig.txt if you search a rom dump sorted by type. i have edited the text and it worked its pretty easy just need to dump the rom thats all.
Click to expand...
Click to collapse
I hope you are referring to the word completion dictionary rather than the auto correct dictionary.
Dictionaries in WM5 and earlier:
1) Word Completion: dyncompdict.dat
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.txt
Dictionaries in WM6:
1) Word Completion: ???
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.0409.txt (for English ROM)
I hope someone figures out the "missing link" so that I can work on an update for DictEditor soon.
vicott said:
I hope you are referring to the word completion dictionary rather than the auto correct dictionary.
Dictionaries in WM5 and earlier:
1) Word Completion: dyncompdict.dat
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.txt
Dictionaries in WM6:
1) Word Completion: ???
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.0409.txt (for English ROM)
I hope someone figures out the "missing link" so that I can work on an update for DictEditor soon.
Click to expand...
Click to collapse
It would be really handy to find out which file holds the Word Completion dictionary - I've got a few duff entries in mine (on my Universal), so I'd like to delete the whole lot.
Cheers,
Steve.
vicott said:
Unfortunately DictEditor does not support WM6 yet.
Click to expand...
Click to collapse
I hadn't gotten a chance to work with your program since I recently flashed. I just automatically installed it since it was always so helpful in the past. I hope you will keep us up to date when you get it working for WM6
vicott, I'm using HTC Touch and I installed HTC PhonePad. I also installed your T9Editor, but when I run it, it always says "HTC Phone Pad is not installed in your device." I have already did a soft reset, chose PhonePad as SIP and the error message still pops up.
boybi said:
vicott, I'm using HTC Touch and I installed HTC PhonePad. I also installed your T9Editor, but when I run it, it always says "HTC Phone Pad is not installed in your device." I have already did a soft reset, chose PhonePad as SIP and the error message still pops up.
Click to expand...
Click to collapse
It will be fixed in the next version. It's already completed actually, but I'm not releasing it yet due to other reasons. If you wish to have the file now, you can e-mail me here.
vicott said:
It will be fixed in the next version. It's already completed actually, but I'm not releasing it yet due to other reasons. If you wish to have the file now, you can e-mail me here.
Click to expand...
Click to collapse
I received quite a couple of irrelevent e-mails regarding this post lately, so I have to clarify here once & for all.
Firstly, I was only referring to an update for T9Editor (I was only responmding to a query if you guys have read the earlier posts), which is one of the 6 "sub-programs" in the DictMgr suite.
Secondly, T9Editor is only used for modifying the dictionary used by HTC Phone Pad.
Thirdly, 5 of the 6 "sub-programs" in DictMgr suite are already compatible with WM6 all the while. The only one that is not compatible is DictEditor.
Next, the update for T9Editor (which is also included in the latest version of DictMgr) has already been released. Please go to my website to download it.
Lastly, DictEditor (used to modify the word completion dictionary in WM5 and below) is not compatible with WM6 because the word completion dictionary file is a different file (different filename and location) in WM6. To add on to the misery, the file structure is totally different. That makes it highly challenging to develop a dictionary editor for it since I haven't read about anybody "deciphering" how the file works YET.
vicott said:
I hope you are referring to the word completion dictionary rather than the auto correct dictionary.
Dictionaries in WM5 and earlier:
1) Word Completion: dyncompdict.dat
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.txt
Dictionaries in WM6:
1) Word Completion: ???
2) Spell Checking: custom.dic
3) Auto correct: autocorrect.0409.txt (for English ROM)
I hope someone figures out the "missing link" so that I can work on an update for DictEditor soon.
Click to expand...
Click to collapse
Update:
Word Completion Dictionary for WM6: compimeh.0409.dat
I am now using bepe's wonderful rom version 0.77. This rom includes the "Touch Keypad" and "Touch Keyboard" input methods, which i like a lot, but these two input methods have different appearance depending on whether the cursor focus: (please refer to the images attached) When the cursor is on a input text box, it shows the keypad, with xt9 support, but when it is not, it just shows a qwerty keyboard. I'd like to ask whether it is possible to be customized so that it would show the keypad with xt9 support regardless on the cursor focus.
do we have a seperate CAB for this?
I also like the input method very much. but it's not working well with PocketCM.
Somebody have file cab? Post please...
I would also like to obtain the cab for the Keypad - its the best input for me at the moment!
I'm lookin for it too, please post cab
I've tried the (poor) forum search and googling the site but not found the cab file. If anyone has it please post, we have a few replies now so the demand is here!
Thanks!
when i first saw this thread, i was googling also for some time, but there really is nothing, absolutely nothing!
Maybe this keyboard could be interestening.... hoping someone finds a cab
I have found this but am at work and cannot check to see if it's the right thing...
http://forum.xda-developers.com/showthread.php?t=324062&highlight=bepe
XT9
dcanfora said:
I have found this but am at work and cannot check to see if it's the right thing...
Click to expand...
Click to collapse
I'm not really sure...just tried on my phone...attached you can see what i got
Does it need some special skins or is it just the wrong keyboard ?
petervbeck said:
I'm not really sure...just tried on my phone...attached you can see what i got
Does it need some special skins or is it just the wrong keyboard ?
View attachment 51309 View attachment 51308
Click to expand...
Click to collapse
That is definitely the wrong keyboard...
Why don't install bepe's ROM????
I think there is no cab so far... I don't know how bepe do the things, but he is always the first to implement new stuff. Great COOKER.
mikhe69 said:
Why don't install bepe's ROM????
I think there is no cab so far... I don't know how bepe do the things, but he is always the first to implement new stuff. Great COOKER.
Click to expand...
Click to collapse
I need for my kaiser, so I cannot flash with bepe ROM. Was my favorite in my old P3660
I think I've found it.
http://forum.xda-developers.com/showpost.php?p=1468537&postcount=227
dcanfora said:
I think I've found it.
http://forum.xda-developers.com/showpost.php?p=1468537&postcount=227
Click to expand...
Click to collapse
This is just the normal T9 phonepad, not the XT9.
I tried to port =) but it is giving me troubles... and I don't have the solution yet
Guybrush said:
I tried to port =) but it is giving me troubles... and I don't have the solution yet
Click to expand...
Click to collapse
O~~M~~G~~
i definetely did the same thing as you did, it takes me 5 hours to dump all the reg and hundreds of files from bepe's rom, follow the original xT9 requied file format and the list in the reg, rebuild them and cook into another rom. but i get the same result as you!!
there must be some peticular thing we didnot discover about the xT9 in bepe's Rom!!
5 hours ? so much... but yes it's strange... =)
ops i missed one file =)
*edit the keypad still not work properly
Guybrush said:
ops i missed one file =)
*edit the keypad still not work properly
Click to expand...
Click to collapse
congratulations, what is the file it is? or make a cab please.
I have the latest kavana
i cant seem to figure out how to dial 1800-flowers for example
i know on the official t-mobile rom i could do ALT+letter and it would dial it.
Click here
Install the Alpha-Numeric Display 180KB (cab) on your phone
Remember do not unzip or unrar CAB files.
Transfer them and click on them once on your phone to install.
Mikey1022 said:
Click here
Install the Alpha-Numeric Display 180KB (cab) on your phone
Remember do not unzip or unrar CAB files.
Transfer them and click on them once on your phone to install.
Click to expand...
Click to collapse
I'm in the same situation too.. I have WM6.1 and I've already done the applock and installed the alpha-numeric app and it still doesn't show... I know this app works because I had it on my default WM6 from T-Mobile...
Or is it just not working for me?
Here you guys go.....Read and Proceed
Mikey1022 said:
Here you guys go.....Read and Proceed
Click to expand...
Click to collapse
Thank you kind sir!! You da man!!
Hehe, however... I did read through the posts in that thread and couldn't find the answer.. how do I get the numbers during a call already in progress?? Which file is it? Thanks in advance.
Hi guys!
I have a WWE Touch Pro 2 and I just found the registry tweak (http://forum.xda-developers.com/showpost.php?p=4014852) to enable word completion.
Since most of my messages are in Dutch I would like to change the Word Completion database to Dutch.
Does anybody know how to do this?
Kind regards,
Piet
Word Completion in Dutch
Hello PietSukkel (hihi)
I changed the reg. also to enable Word Completion. I have a branded T-Mobile Rhodium. I have a Dutch word completion.
So it seems that the correct language file was already on my phone.
greetings
Patrick Schouten
siflaar said:
I changed the reg. also to enable Word Completion. I have a branded T-Mobile Rhodium. I have a Dutch word completion.
So it seems that the correct language file was already on my phone.
Click to expand...
Click to collapse
Your phone is probably running the Dutch OS version, I'm running the WWE version, so word completion is in English.
Piet
pietsukkel said:
Your phone is probably running the Dutch OS version, I'm running the WWE version, so word completion is in English.
Piet
Click to expand...
Click to collapse
Same problem here. I also have a WWE version... that's why I don't use word completion. To workaround this minor "setback", I write faster. lol
Just kidding.
What about loading the language file(s) to the correct path (don't have a clue where) and then activate it via registry? It should do the trick... I think.
Have to find out which files and the correspondent reg key though.
mnico said:
Same problem here. I also have a WWE version... that's why I don't use word completion. To workaround this minor "setback", I write faster. lol
Just kidding.
What about loading the language file(s) to the correct path (don't have a clue where) and then activate it via registry? It should do the trick... I think.
Have to find out which files and the correspondent reg key though.
Click to expand...
Click to collapse
Checkout my cab, it includes a tool to fix the stuck keypad: http://forum.xda-developers.com/showthread.php?t=772413