Related
Recently I am experience and incredible fact.
The green button to start a call NOW works as CALENDAR shortcut button (yes like the top right button)
The red button to END a call NOW works as CONTACT shortcut button (yes like the top LEFT button)
The 2 Contact and Calendar button (top left and right) DO work correctly.
I supposed some recently installed applications made this mess. Therefore I tried
- soft reset: no way
- hard reset: no way
- I PUT MDA 3 in BootLoader mode and I REINSTALLED MY rom 1.42 WWE
Now what happened is that for 2 days OK, the GREEN and RED button DID work correctly to start and end CALLS.
After 2 days, the strange phenomena appeared again!
Please note that I HAVE NOT INSTALLED ANY ADDITIONAL SOFTWARE!
I am very puzzled.
Please help
Saulo
Maybe a virus?
Any suggestions for this problem?
I am getting crazy at this behavour...did i get a virus?
Thanks and waiting
Saulo
I got it to the second time yesterday, but it just went away.
The first time it happened I did a hard reset 2 times and that didn't fix it.
The battery had to die completely
Is it a known issue ofr ROM 1.42?
Thanks and waiting
Saulo
did you try to REFLASHING ????
I was actually going to downgrade because the problem never happened in 2003, but my battery was dead when the battery was charged enough to start the buttons worked correctly.....
The second time it happened it just went away after a few hours (I was driving so I couldn't mess with it) when I got home it was back to normal.
Re: Maybe a virus?
saulo866 said:
Any suggestions for this problem?
I am getting crazy at this behavour...did i get a virus?
Thanks and waiting
Saulo
Click to expand...
Click to collapse
Have you recently installed any software, let me know maybe it is related to some software??
Do you know how to UNLOCK the ExtROM and then install 1.42 o
Yes I have installed Windows 2005. Then since very unstable, I downgraded to Win2003, 1.42 (not the original 1.31
Now, in addiiton to his strange fact, (flipping buttons) I experience the flickering of screen, several times a week. A soft reset usually solves this new problem. But then it may reappear.
I installed the following softwares: CE Chinese Input
I thought it was the culprit, therefore i made a HARD RESET.
Then I tried other sfw, also trial Chinese Inputs.
But again this problem reappeared
Now I made a clean HARD RESET and NO sfw.
The problem reappeared.
Conclusion:
I guess something wrong in External ROM.
In fact in Device Information:
ROM version 1.4200 WWE
Radio 1.13.00
ExtRom: NONE
Do you know how to UNLOCK the ExtROM and then install 1.42 on it?
Thanks
Saulo
i have the same problem today. it has happened before. i think it is a glitch in the rom. i have hard reset and it went away before. this time no. i have hard reset and restore my backup and same thing. the culprit could be a bad wisbar install. that is what i think i did wrong, i installed wise bar and did not reset (forgot). then this morning woke up to the send button going to calendar. any suggestions. thanks.
i have the same problem today. it has happened before. i think it is a glitch in the rom. i have hard reset and it went away before. this time no. i have hard reset and restore my backup and same thing. the culprit could be a bad wisbar install. that is what i think i did wrong, i installed wise bar and did not reset (forgot). then this morning woke up to the send button going to calendar. any suggestions. thanks.
I get a similar thing but my green button opens TomTom navigator
I also upgraded to WM5 and then back down again to the 2003 1.42
Hi all,
I recently received an O2 XDA Orbit. The Orbit works fine, except that sometimes on doing a soft reset it will hang at the green "Windows Mobile 5.0" welcome screen.
I have left it for periods of time in excess of 30 minutes, and eventually the XDA becomes completely unresponsive (backlight doesn't come on when pressing buttons etc). On doing a consecutive reset, it does exactly the same thing. The only way to resolve it is to do a complete hard reset.
This initially happened when using Sprite Backup. Before doing a backup the program resets the device, and this exact same thing happened. I thought it would be to do with the software, however i have not installed Sprite since but i am getting the same symptoms.
A relative of mine got an Orbit at the same time and hers is having the same problems, yet another relative received one a few months before and his is fine.
I was wondering if anyone else is having this problem, or if anyone can suggest a remedy for it?
I got my orbit too recently but it did not freeze at startup but a white screen flashed up for a few secs. I did a hard reset and then before the o2 extras get installed - a\3 sec countdown will appear on the screen do a quick softreset - stylus in the soft reset hole.
I reckon that will solve your problem as its prob due to the o2 extras.
Nexim said:
Hi all,
I recently received an O2 XDA Orbit. The Orbit works fine, except that sometimes on doing a soft reset it will hang at the green "Windows Mobile 5.0" welcome screen.
I have left it for periods of time in excess of 30 minutes, and eventually the XDA becomes completely unresponsive (backlight doesn't come on when pressing buttons etc). On doing a consecutive reset, it does exactly the same thing. The only way to resolve it is to do a complete hard reset.
This initially happened when using Sprite Backup. Before doing a backup the program resets the device, and this exact same thing happened. I thought it would be to do with the software, however i have not installed Sprite since but i am getting the same symptoms.
A relative of mine got an Orbit at the same time and hers is having the same problems, yet another relative received one a few months before and his is fine.
I was wondering if anyone else is having this problem, or if anyone can suggest a remedy for it?
Click to expand...
Click to collapse
Was it plugged in when it hung?
It happens both when it is plugged in to my laptop, and when it isn't connected to anything at all.
I was doing something in task manager yesterday.
When i was shutting down some programs.
My MDA COMPACT III froze.
The last program i closes was device.exe
Now its hanging,
It goes through he O2 screen, the next screen stays on.
Back light keeps burning.
what am i supposed to do now?
I've had this a few times now. The latest was after I installed Opera and did a soft reset. I left the PDA for over an hour but it never came back responsive. After several soft resets I had to do a Hard Reset. (Hold down both Soft-Keys and Press the reset button in the hole on the side with the stylus). This WILL wipe all your data though.
i already left it on for 5 hours, no changes where made.
i also left it laying on my desk with the battery removed.
no changes
In bootloader it doesn't get connected to my pc, so i can't flash any rom into it
Tha said:
i already left it on for 5 hours, no changes where made.
i also left it laying on my desk with the battery removed.
no changes
In bootloader it doesn't get connected to my pc, so i can't flash any rom into it
Click to expand...
Click to collapse
Do a Hard Reset. (Hold down both Soft-Keys and Press the reset button in the hole on the side with the stylus).
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Tha said:
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Click to expand...
Click to collapse
that is not how a hard reset is done. dont press the buttons on the sides of the device. what you do is starting bootloader.
to do a hard reset do as described here in the wiki.
Tha said:
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Click to expand...
Click to collapse
That's bootloader mode NOT a hard reset.
To perform a hard reset, press and hold two keys on FRONT of phone next to Red and Green call buttons while pressing reset button with stylus. Keep these TWO buttons held until text appears on screen asking you to "Confirm to Format". Press the GREEN call button and then sit back until the phone re-boots.
Then you have the good job of re-installing everything again.................at least the phone will now work though.
i feel freaking dumb right now....
going to feel a shamed sitting in the corner with a donkey hat on.
thanks guys, its up and running!
Same problem here have to do hard reset every couple days.Did had back-up but now that freezes also
This way it`s not for me,will go back to other ROM till this is fixed.
A pitty though
same here,
4.0 isn't finished.
very unstable imo
Tha said:
same here,
4.0 isn't finished.
very unstable imo
Click to expand...
Click to collapse
have the same problem
stucking Artemis
same Problem here with my Orbit. I had to hard-reset two times last week after installing new programms. After It ran fine for about 4 days until yesterday.
Anyway, very fine piece of Rom, even nicer when buggs fixed.
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Furbious said:
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Click to expand...
Click to collapse
The first time my Orbit stuck just after installing Battery-Status as first Program after installing the new Rom to my Orbit. (I did not overclock at this time!)
I do not know what was second, but my device stuck after necessary soft-reset just after installing.
I installed B&B 4 again after the second hard-reset and it worked fine with dynamic overclocking from 143 to 247 MHz for 4 - 5 days. I felt as a lucky Guy
Yesterday I had to switched off the phone (not the device). As i wanted to switch on the phone some hours later it stuck. After waiting some Minutes and nothing happened, I did a soft reset and my Orbit hung in B&B-screen. A few soft-resets later I did a hardreset to get it back to work.
For those still having trouble with freezes on soft reset - have any of you still got the 6 tab home plugin?
Gullum posted this in the Dev forum, and that could be whats causing it - I'd gone back to 5 tabs, as it'd always set the phone to vibrate with appointments.
I'd forgotten that I'd done that, and that could well be whats fixing the issue.
Hi i've already had this problem, which is well described in this thread...
http://forum.xda-developers.com/showthread.php?t=323995
Its a bug in this version of B&B 4.0
hopefully Tom will be fixing it
theres no cure for it but to do a hard reset unfortunately
Furbious said:
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Click to expand...
Click to collapse
have you done any soft resets since then?
also i dont seem to find any pattern. I have tried various applications as i've mentioned in this thread http://forum.xda-developers.com/showthread.php?t=323995 , i have done with and without tray launcher the problems is still there.
I must have soft reset a dozen times since, installing new keyboards and other such software.
No problems at all.....
Have you tried installing the 5 tab home plugin which is in the main B&B v4.0 thread?
Furbious said:
I must have soft reset a dozen times since, installing new keyboards and other such software.
No problems at all.....
Have you tried installing the 5 tab home plugin which is in the main B&B v4.0 thread?
Click to expand...
Click to collapse
Hi Furbious, what is this 5 tab home plugin and how would that make any difference? if that is going to fix it, then i'll try it again. THANKS
terabaap said:
Hi i've already had this problem, which is well described in this thread...
http://forum.xda-developers.com/showthread.php?t=323995
Its a bug in this version of B&B 4.0
hopefully Tom will be fixing it
theres no cure for it but to do a hard reset unfortunately
Click to expand...
Click to collapse
Its not a v4 only issue, i had the same problem with v3.7 and that was without anything else installed, it only happens on soft reset and it appears to happen more oftern than not when there is some form of activity, ie, program closing / loading, media player running.
Just happened for first time on v4 for me yesterday, again, no additional programs installed
Hi everyone I've recently been given a O2 Orbit but when you turn on the phone a white screen comes on and coloured lines come on infront, I was just wondering if any of you fine people would know if it was the screen. Im new to this so any information would be greatfuly recieved.
Thanks for your time
is it the green/blue/red screen?
when in doubt, hard reset it. i think its the two soft keys being held and inserting the stylus into the reset hole
No it was ant the green/blue/red but have sorted it now just did a reinstall of the factory rom and its fine now thanks
hi there!,my tytn worked great for over one year (never dropped,treated like a king;p) till yesterday ,all front buttons except d-pad just stop working, at first i have done HR but it didnt solve the problem then i reflashed device with several roms and still buttons dont work (yeah they work once for about 10s) ,so it makes my device rather useless as a phone
it looks for me like a hardware problem but i am not sure what really is going on and if it is possible to fix it somehow.
maybe someone has a solution for that?
any help will be appreciated
pksred said:
hi there!,my tytn worked great for over one year (never dropped,treated like a king;p) till yesterday ,all front buttons except d-pad just stop working, at first i have done HR but it didnt solve the problem then i reflashed device with several roms and still buttons dont work (yeah they work once for about 10s) ,so it makes my device rather useless as a phone
it looks for me like a hardware problem but i am not sure what really is going on and if it is possible to fix it somehow.
maybe someone has a solution for that?
any help will be appreciated
Click to expand...
Click to collapse
Quick question......you say you performed a hard reset?? This action requires you to use the two front soft buttons and the stylus...therefore those buttons must have worked??
I suggest you try flashing a new ROM to the device and seeing if this remedies the problem?
i used clear storage, but anyway first i used black satin then reflashed to schaps and then to new Pays 6.1 rom and buttons still dont work,so for me it doesnt look like problem with a rom
yeah
softkeys works when i perferm HR ,i checked it right now,but still they are useless
I have the same issue, the buttons work sporadically across several roms, including the official release... I too, have determined that it is a hardware problem... I am sending mine back for warranty repair, I just hate to be without it for any length of time... I also have the screen problem, where it fades to white and sometimes a soft reset doesn't work to bring it back to a visible state...
lol
it back to work all buttons works