Develop Bugs

Static/clicking sounds on New Microsoft Voice Cmd Ver.1.5

Does anyone have Microsoft voice command version 1.5? And if you do, with the incoming caller announcement enabled, do you get a static clicking sound on your phone device when you get and incoming phone call? I am using a XDA IIs and have this issue. Is there a work around for this issue? Any help would be greatly appreaciated.
Thanks,
Mike

I too have the problem of sound stuttering.
I've never installed any version of voice command.
Al applications playing sound, like media player or any other music player and even the spoken words from TomTom seem to suffer from this.
Since all WAV/MP3 audio seems te suffer from this I gather it must be a CODEC issue of some sort, probably caused by installing some application that has overwritten system files.
Does anybody know a way to solve this ?
It does not seem to occur after a hard reset, I havent tried reinstalling applications one by one to find the culprit, I just restored a Sprite backup.

Yes, I've got the same problem... I just upgraded to VC1.5, and the clicking is only on the announcement of incoming calls... all else seems fine.
Treo

same here with my pda2k.

I have the same issue.
To solve that, Just disable this function.
Tap at start >setting >personal >voice command
at Phone option disable "Announce incoming calls"
I think version 1.5 has so many option that you can select more that the old one.
Voice command over bluetooth is still not work.

I'm afraid this is a more general problem (see earlier threads). There are also problems with WM10 and GPS. I've found that WM10 is OK when No other programm is running. GPS is a larger programm and continues to give voice problems. Maybe the problem can be solved if we could increase the working memory. Who has a suggestion?

I know un checking that option will fix the issue but then I can't use it. So it does not solve the issue. LOL so if anyone does know a way to make the audio a higher priority or something to make it work please let me know.
Thanks,
Mike

Fixed it, you have to use resco and change audio priority in settings to 110 in registry. Works like a charm now.
MIke

Hi Mikee4fun,
Could you be more specific about which key/value/data in registry that you changed to fix this?
Thanks in forehand!
_________________
QTEK 9090
Rom: 1.22.00 WWE
Radio: 1.08.00
ExtROM: 1.22.126

Mikee4fun said:
Fixed it, you have to use resco and change audio priority in settings to 110 in registry. Works like a charm now.
MIke
Click to expand...
Click to collapse
Can you share the registry entry that needs to be changed?

Ditto, I'd like to know too please cos I've got the same problem.
Own an XDAIIs and use Microsoft Voice Command 1.5 with the stuttery incoming call announcements. Everything else works flawlessly.
Is Microsoft Voice Command the dogs b*ll*cks when it comes to voice recognition! It's the most accurate voice recognition system I've come across. Well done Microsoft, you've made something that works well (for a change ) , apart from stuttery voice announcements of course.

anybody experiencing about 1 to 2 second lag before the ringtone actually rings when you have incoming calls with announce incoming call enabled?
I'm having voice command installed on my Storage area of my Xda ii mini. I'm wondering if that's the reason why it lags?

Here is the exact registry entry
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\Priority256
A detailed thread is here: http://forum.xda-developers.com/viewtopic.php?p=107031#107031

Well I just noticed this static noise while announcing the name with MVC or playing any other audio on the Blue angel only, I tried it on the hima it works flawlessly it never occured

VC 1.5 static problems
:twisted: yup just tried the fix with resco registry editor and all is fine
thx for the info
just another reason why this site is so good imo

Bluetooth and Voice Dial problem

Earlier when I used to press the answer button on the bluetooth it used to bring up the Voice Dial, now when I press it brings up the Dial Pad. Anyone can tell me what would I have done to cause this and how to fix it? Thanks in advance.

kull said:
Earlier when I used to press the answer button on the bluetooth it used to bring up the Voice Dial, now when I press it brings up the Dial Pad. Anyone can tell me what would I have done to cause this and how to fix it? Thanks in advance.
Click to expand...
Click to collapse
Read through this thread: http://forum.xda-developers.com/showthread.php?t=257415
There is a hack mentioned in there about BT Headsets and voice command. Good luck.

Thanks but did not...
Thanks for the link, unfortunately the Bluetooth hack file provided has no effect whatsoever on the present status of the phone. Guess these are Universal hacks and not Wizard.... the hunt for the solution is still on....

Same problem here
When I use TT5 and do voicedailing, I get stuck with a annoying Phone screen in front of my TT navigator

How to resolve this?
How to resolve this? No help from anyone....

http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Check the link about MS Voice
I added a note about creating a key as well.
All works fine on my Orange spv m5000

Voice Speed Dial not Voice Command
Thanks for your reply, actually what I am looking for is to activate the Voice Speed Dial via Bluetooth not Voice Command. It could do that before, but now when I click it brings up the phone dialer and not the Voice Speed Dialer. Any solution for that?

LG KS20 NAVIGATION-BUG SOLVED(partially)

Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
But if you run in the background a windows media file (f.e an mp3 with no sound) you will see that the voice announcements are fully heard.
I was wondering if a kind developers can help us a bit and explain us why this is happening.
Best Regards

At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut

Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?

Mouse007
I am the same one who has post post in the french <forummobile> which i was asking the sollution with the microphone.
The thing is that i test my phone yesterday through my office for 1 hour kai 15 minutes in GSM and 1 hour an 35 minutes with 3G.My Microphone did not turned off.
What can i say

moyse007 said:
Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?
Click to expand...
Click to collapse
I'm sorry this has nothing to do with your microphone bug, but since I remember having similar problems with my old SDA smartphone, which were caused by bad hardware design, I would suggest to send your phone to the service center. Maybe some KS20 phones are having similar defects, too. I'm afraid there will be no software solution for this bug.
Regards
Helmut

Thanks a lot , but the problem affects all the ks20 when we're calling outside 3G reception
I'm sure the problem could be solved by the same kind of software ...

I had also this problem occasionally and my favorite PDA reseller / SFR (Vodafone France) representative explained that the same problem occured with Nokia 3G+ phone using SFR networks.
Actually the problem would not lie with LG nor the ROM but with the SFR 3G+ network when the phone is switching between 3G+ and GPRS. The solution - as recommended by Nokia France in an official note further to this problem - is actually simply to block the phone to GPRS (or 3G+ if always available) network (instead of letting it switch automatically) until SFR fixed their network problem. Of course, if blocked to GPRS, you will need to change this everytime you want to use 3G+.

giannis123 said:
Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
Click to expand...
Click to collapse
Maybe it cannot set the Audio buffer size properly... this bug involves not only Tomtom or Destinator but many other GPS navigation software too!!! This phone is FULL of BUGS!!!!! I've also try Miopap (iGo) software but it can't run in fullscreen mode because of top menu bar that cannot be hidden; then...this phone can't run any software using directDraw, so there's no 3D acceleration, no PointUI interface, no games, no iGo8...; I cannot use Skype and this due to the Qualcomm processor architecture...
hope a new rom is coming...now this phone (as is) sucks...

@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax

paxman said:
@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax
Click to expand...
Click to collapse
Thank you paxman, I've already seen it, but they're only SFR or German...I'm waiting for an English one at least(10e or better 10f)...so the only thing I can do now is playing (crying ) with my 10c italian ROM...

Here is the dutch version of the *Fix* for the LG KS20.
I also changed the dummy.asx a little. Instead of calling dummy.mp3 times 40. I've now made that script to call dummy.mp3 one time and then it will call dummy.asx again.
This means the loop is continuous instead of having it end after 40 times (20 hrs).
Hope it's useful.
I want to thank lindih for the original fix.

This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?

CWKJ said:
This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?
Click to expand...
Click to collapse
I don't know exactly where all the hardware pieces are from, but the phone is sold by LG and caries the LG logo. So I suspect it could be made by LG.

lindih said:
At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut
Click to expand...
Click to collapse
Hi I have downloaded the file and see the folders and files inside can you please confirm the steps required to install.
I assumed copying the files into the relevent folders on the device is this correct?. and where do i put the "MortScript-4.1-PPC.cab" file and what do i do with it? do i just install it?
Cheers
Darren (NEWBE)

Voice Command

is there any rom that works with MS Voice Command?
It seems that on Stock roms it causes all sorts of bugs (internet connection shutting down etc, and then stops working?)
With 1000 contacts, Cyberion is not too useful?
And yes people. I have googled and searched please keep flame throwers off....

Hi,
have you tried this patch (link below)? It's for Elf, but perhaps it also works on Diamond.
I can't test it atm, cause my ordered Diamond was shipped today, so I have to wait a few more days
Link: http://forum.xda-developers.com/showpost.php?p=2031281&postcount=7
Greets,
FunnySurf

mikeycollins13 said:
is there any rom that works with MS Voice Command?
It seems that on Stock roms it causes all sorts of bugs (internet connection shutting down etc, and then stops working?)
With 1000 contacts, Cyberion is not too useful?
And yes people. I have googled and searched please keep flame throwers off....
Click to expand...
Click to collapse
I been using mine that i had for my tilt and its been working fine. It gives me error message when first install but works like a charm.

drieves1 said:
I been using mine that i had for my tilt and its been working fine. It gives me error message when first install but works like a charm.
Click to expand...
Click to collapse
Hi,
can you tell me your version of VC?
Greets

@mikeycollins13
Today I get my Diamond. My 'old' VC works perfect.
VC version: 1.60.4622.0 with patch from link above.

Activating Voice Command
I currently have a kaiser and am considering a daimond. One hesitation is, how can you activate voice command on the diamond without having a button to map it too? I know it will also work via a headset, but what about just by using the phone itself?

How to get VOIP/SIP working on Touch Pro 2?

I did search on xda and few results came. Tried the sip profiler and voip.cab file and my gps stopped working.
Can someone please post step by step and post the write files here that will NOT disable my tomtom GPS.
Thanks.

SJPhone is working fine.
Although written for WM2003SE, it still works quite well.

This looks very interesting. However I wonder if it works with the VodaFone tagged TP2 as I have heard that the mobile operators do not like VOIP and disable the VOIP part of the phone. A sales VF persons simply said to me that they do not support it and did not know whether anything had been disabled.
Sam