Hey m8s,
i have b&b 4.1 in my p3300 (spl 1.11.0000), it's necessary to run again USPL to flash b&b 4.2 or the original rom?
thnx in advance
Your device is still cid unlocked so you don't need to run uspl again
meschle said:
Your device is still cid unlocked so you don't need to run uspl again
Click to expand...
Click to collapse
thnx m8,
by the way great job
Related
Hello there everyone.
Im new to this forum.I need help to upgrade my htc p3300.
IPL-3.13.0001
SPL-3.13.0000
GSM-02.94.90
OS-3.13.0.3
ROM Version-3.13.409.1 NOR
radio versio-02.94.90
protocol version-4.1.13.44
Ext.rom version-3.13.409.102
I need to upgrade it in english.Please help is needed badly.
Best Regards
Edit/Delete Message
Just read the sticky posts and you should know what to do.
CID Unlocking / USPL and further tips from Meschle are not that hard to find....
After successfully running USPL you can flash any rom (for Artemis) you want....
being new is no excuse for being lazy...
btw: you're from norway ? niiiiiice girls there
no im from Albania
i did the cid unlock but can you give me a link where to download the english version of windows mobile. because after i did the cid unlock i did install the new version of windows mobile but in norwegian.
did you check the data form my artemis are they correct so i can upgrade to english version?
davaxhiu said:
did you check the data form my artemis are they correct so i can upgrade to english version?
Click to expand...
Click to collapse
If your SPL is 1.11 your device should be cid unlocked and ready for flashing.
(this should be after running USPL)
There are lots of english versions....check the wiki pages...
The newest one's are bepe's wm6, B&B 4.3 and Meschle's Touch 3 and O2 Premium 2
my spl i 3.13 and this is after i did the cid unlock and installed wm6 but in norwegian can i install it in english with this spl??
my spl is 3.13 but this came out after cid unlock and after installing the new version of wm6 in norwegian.
can i install it in english with this spl???
davaxhiu said:
my spl is 3.13 but this came out after cid unlock and after installing the new version of wm6 in norwegian.
can i install it in english with this spl???
Click to expand...
Click to collapse
USPL need to be 1.11.0000 before you can flash to an other ROM
ok i will try again and post results.can you give me a link where to download wm6 in english but non rapidshare , i cant download there
davaxhiu said:
ok i will try again and post results.can you give me a link where to download wm6 in english but non rapidshare , i cant download there
Click to expand...
Click to collapse
Here you can find WM6 custom ROM's.
The original you can find here.
thanks man i did it.
i first did the cic unlock and i got the spl 1.11.0000 than i flashed with the artemi touch 3.01 and it works fine man.thanks a lot.
if you could send me some link with some applications for example tomtom navigator and any extra applications.
thanks man i did it.
First i did the cid unlock and than i flashed with artemis touch 3.01 and it worked.
Now i need some more applications like tomtom or any other application.
Can you give me any link ??
thanks man
can i flash artemis wm6 rom to my dopod m700.ols help.may i know how to flash pls provide a detail procedure.thx
yes, u may, I already update to B&B 4.3 WWE rom, very cool and stable like it very much.
awenthong said:
yes, u may, I already update to B&B 4.3 WWE rom, very cool and stable like it very much.
Click to expand...
Click to collapse
can u provide the link for me.thx
You must cid unlock first, then can flash the new rom. You can flash ANY ROM to your M700 after flashing USPL on it, no need to pay for CID unlock anymore! Here is the link below:
http://forum.xda-developers.com/showthread.php?t=311403
Download your new rom here:
http://forum.xda-developers.com/showthread.php?t=339226
Good Luck
I've used Black & Blue 4.0 4.2 4.3 & Touch 4.01 for my Dopod M700 OK.
Now I use Touch 4.01
especen said:
I've used Black & Blue 4.0 4.2 4.3 & Touch 4.01 for my Dopod M700 OK.
Now I use Touch 4.01
Click to expand...
Click to collapse
Artemis Touch 4.01 not stable, always freeze when soft reset
Hi members ...
i've an htc p3600(SFR-S300), that i've flashed with a WM6.1 cooked rom,
so i want to downgrade it to wm5 or wm6 (original rom)
thanks a lot ....
hasni2005 said:
Hi members ...
i've an htc p3600(SFR-S300), that i've flashed with a WM6.1 cooked rom,
so i want to downgrade it to wm5 or wm6 (original rom)
thanks a lot ....
Click to expand...
Click to collapse
Get the wm5 or wm6 ROM and flashed again....
vnt said:
Get the wm5 or wm6 ROM and flashed again....
Click to expand...
Click to collapse
But where can i get them, pleeeeeeeeeeeezzz. ??????????
On the htc website you can download a wm5 official rom
hasni2005 said:
But where can i get them, pleeeeeeeeeeeezzz. ??????????
Click to expand...
Click to collapse
Also you can find a list at the bottom of this post:
http://forum.xda-developers.com/showpost.php?p=1951673&postcount=5
Good Luck!
Hi,
FWIW, I've "USPL" my device (P3300). I can flash english ROM and French aej's ROM as well but I can't flash the French Ooops ROM or B&B 4.3 Roms. I'm always getting Error 260 code with the French Ooops ROM or B&B 5 Roms...
Are these ROMs (French Ooops ROM or B&B 5 Roms) corrupted ? Was someone able to flash them ? If so how ?
Thank you in advance for any feedback !
BR
Where do you find french version for these ROMS ?
I think they are all WWE ! Only B&B 4.3 was translate in french by tom and aje.
What is the number that is after SPL when you boot your PDA?
Oups, I did typos,
Here it's what I've dowloaded from this forum :
- Tom_Niki_Project_v2.1.3_FRA
- Tom_Blue_and_Black_4.3_FRA
None of them worked....
The only french ROM working is aje's one.
Zecanilis said:
What is the number that is after SPL when you boot your PDA?
Click to expand...
Click to collapse
SPL Number is 1.11.0000
Zecanilis said:
What is the number that is after SPL when you boot your PDA?
Click to expand...
Click to collapse
SPL Number is 1.11.0000
swierzbicki said:
- Tom_Niki_Project_v2.1.3_FRA
Click to expand...
Click to collapse
This ROM is for Nike PDA not for Artemis... (I think)
Hallo,
1 question please.
i had Flashed Olinex SPL 1.40 a long time ago, and i flashed many ROMs (without SPL and Radio).
Can i now flash my Diamond with the new shipped ORIGINAL HTC Rom 2.03 (inclusive SPL and Radio) or do i have to do some things before?
i.e the ROM is ORIGINAL SHIPPED HTC ROM.. untouched!
Thanx in Advance
WBR
Siemens Lover
SiemensLover said:
Hallo,
1 question please.
i had Flashed Olinex SPL 1.40 a long time ago, and i flashed many ROMs (without SPL and Radio).
Can i now flash my Diamond with the new shipped ORIGINAL HTC Rom 2.03 (inclusive SPL and Radio) or do i have to do some things before?
i.e the ROM is ORIGINAL SHIPPED HTC ROM.. untouched!
Thanx in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Yes you can! But put your phone in bootloader mode manually
Thanx man for ur quick answer...
i love XDA!!!!!!!!!
omaga said:
Yes you can! But put your phone in bootloader mode manually
Click to expand...
Click to collapse
I did hspl. I think. I three colour mode i have 1,40 olinex.
But now when i try to instal one of these officiel roms after it goes to 100% comes message image is corupted on RUU and on phone couldnt load rom try again.
But all these custom roms installing correct why I cant install these officiel roms?
Thanks
Rogan
You might want to update 1.4 to 1.93 HSPL and try again.
Get here
R3PUBL1K said:
You might want to update 1.4 to 1.93 HSPL and try again.
Get here
Click to expand...
Click to collapse
I geting error on Ruu
"ERROR [270] : Update Error"
The image file is corrupted, Please check your Update Utility.
On phone 3 colour mode:
Diam 100 64M
SPL-1.93 OliNex
MicroP-Diam (LED) v11
Psoc-Diam STAGE_PVT v0x30
Upgrade ROM Code error
Please try again
I took officiel rom from here
http://forum.xda-developers.com/showthread.php?t=471699
Found this topic! hope it will solve my problem.
http://forum.xda-developers.com/showthread.php?t=486524