I have an official WM5 HTC ROM (the last version) installed in my device and when I try to upgrade the new WM6 ROM the RUU program say this "ERROR [294] INVALID VENDER". and the uppgrading finish.
My device was "CID unlocked" (pod) by an USPL tool but it,s not a free device (it,s a Movistar device).
Questions:
I need other CID unlocket tool to install WM6?
If my phone operator is Movistar can,t I upgrade to this WM6 ROM?
Repeat with the last htc WM5 ROM I haven,t no problems for upgrade after make the CID unlocker.
I try make a HR firdt but I read allways "ERROR [294] INVALID VENDER ID"
Thanks and best regards for all.
sorry by my bad english. From Spain Jose.
Yes, you need to make cid unlock first.
Try to download a rom from Tom Codon like Black&Blue 4.1 WWE and do a CID-unlock with his USPL included in the download files from the rom. Then when finished unlocking, try to flash your rom again.
Good luck!
Related
Hello
I have a problem during update my xda.
Already my xda is working on OS 5.1.342 (build 15096.3.0.0)
I am trying update to Artemis touch 2.1 WWE or Artemis_Touch_3.01_full.
I follow the steps in guide (activesync then uspl cid unlocking) and (activesync then flash artemis touch rom).
When USPL is run screen on my xda is blinking and white light on the end, after restore itself.
On RomUpdateUtility i click next and next,
"Verify that you want to update the ROM version:
From: Image Version: 1.25.206.2
To: Image Version: 1.00.000.0"
Progress is running, but on 3% xda is restarting itself again.
And I see new window
"ERROR [270] : UPDATE ERROR
The image file is corrupted. Please check your Update Utility"
And EXIT.
Help me please.
Sorry for repeat question.
I hope I find the answer.
http://forum.xda-developers.com/showthread.php?t=311650&highlight=idiot
http://forum.xda-developers.com/showthread.php?t=313486
http://forum.xda-developers.com/showthread.php?t=312052&highlight=vista+drivers
Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire
I am admittedly a newb. Having 2 problems flashing certain ROMs only
1. cmd.exe box opens in MSDOS but is empty
2. bootloader opens OK
BOTH instances end up with a "CONNECTION ERROR" and don't run
my bootloader screen shows:
HERM100
IPL-1.04
HERM100
SPL-1.40 Olipro
do I need a different SPL?
any help much appreciated
thanks,
db
It is strongly recommended that you flash HardSPL7 (2.10 Olipro) from this thread http://forum.xda-developers.com/showthread.php?t=296722, later you can flash any cooked ROM avoiding lots of problems. I suggest you to use the SD card method, both for HardSPL and ROMs, instead of RUU as you could avoid many connection issues like these you are having.
HTC Tytn
SuperCID
SPL: 2.10.Olipro (HardSPL v7)
ROM: Shamanix WM6 Ultimate v2 Final
RADIO: 1.48.00.10
This thread http://forum.xda-developers.com/showthread.php?t=295735 has a very good discussion about SD card method for flashing ROMs and the procedure its exactly the same for HardSPL flashing.
HTC Tytn
SuperCID
SPL: 2.10.Olipro (HardSPL v7)
ROM: Shamanix WM6 Ultimate v2 Final
RADIO: 1.48.00.10
thank you both for your input. will try force SPL first (was unable to install HARD SPL 7). if not will try SD method.
thanks again,
db
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .
lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps
error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...
Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1