Related
Hello
If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?
thx
6600 said:
Hello
If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?
thx
Click to expand...
Click to collapse
TAKE A LOOK HERE : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
FROM XDA-WIKI SECTION :
" 1. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
5.You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
6. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
!!!! SuperCID devices are able to flash any NBH image using this method. "
I unbricked my Orbit with the original ROM from O2.
Firstly put your Orbit in Bootloader mode (reset and record button)
Then using the task manager stop ActiveSync processes.
Then connect the phone via USB and then run the RUU program.
Works fine!
i have a little problem with flashing my dell. before upgrading on him was wm2003se and i have downloaded a05 version of 2003se from dell web page. i tried to upgrade to wm5 and renamed WM50_B_A01_X50v_WM5_ENG_nb0.crc to DiMa_B_A01_X50v_WM5_ENG_nb0.crc and WM50_B_A01_X50v_WM5_ENG.nb0 to DiMa_B_A01_X50v_WM5_ENG.nb0. upgrading boot loader went successuful and after i press wl+pw+reset it starts sd loader but he cant see any os image (WM50_K_A01_X50v_WM5_ENG.nb0).
i tried to copy following files on sd card but he only see first image (boot loader image):
WM50_B_A01_X50v_WM5_ENG.nb0
WM50_B_A01_X50v_WM5_ENG_nb0.crc
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
how to make him to run and see os image?
help
danijel
can anybody help me? why and how to make him to recognize OS image files (WM50_K_A01_X50v_WM5_ENG.nb0)?
i`am desperate....
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
satani said:
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
Click to expand...
Click to collapse
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
drakic said:
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
Click to expand...
Click to collapse
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Ah, you can make it using another way too. Go to dell page, support, download drivers... electronic, choose Axim, and X50. There, download the downgrade from WM5 to WM2003SE in your language, the rom I gived you before is the english version, maybe you want another language. Extract that exe with winrar or simply ejecute it, and dont continue, quit, go to c:/Dell... ROM and inside you will se a rom.IMG. Well, you need img2nb0f.exe, to convert the .IMG to .nb0
When you get he .nb0 file you have to create his _nb0.crc Maybe CRC Calculator help you or simple put the files on the SD Card and when you choose the SO image ( _K_ ) it will show you a CRC error, simple copy the good CRC, modify on the file on your PC, and put it again on the SD Card.
I could make it for you (if you dont know what are you doin), if your language isn't english.
This is only if your language isn't english, remember, if its english its more easy and save time, read the post #5
migatxu said:
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Click to expand...
Click to collapse
before anything i have wm2003se a01, then upgrade to a05,after that i downloaded wm5 boot loader and renamed WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc & WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc to DiMa_B_A01_X50v_WM5_EN_nb0.crc & DiMa_B_A01_X50v_WM5_EN_nb0. i copy these files on sd card and press wl+pw+reset and he read these images successufull. he asked me to press pw+reset, a pressed WL+PW+RESET and after that he dont want to boot but i can load sd loader (pressing wl+pw+reset) but he cant see wm5 OS image (WM50_K_A01_X50v_WM5_ENG.nb0).
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
i want to install english version of wm5 (there isnt croatian version), but i am seems to me stuck on wm2003se...
will this help what you have written to me? i dont want to make worst **** or it cant be worst
thnx
danijel
OK you want to install WM5 English, but what operating system is in the device? Its important to install the correct bootloader with the correct prefix. Then the SD Image Loader will see the operating system ROM.
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
Click to expand...
Click to collapse
Not, with WM50_K_A02_X50v_WM5_EN.nb0, I gived to you a rapidshare link with it, and inside the bootloader too, but if you had installed Dell Axim X50v WM5 A02 Bootloader.zip go to flash the SO directly.
When the so image isn't seen by the SD Image Loader, Im sure that its because its something wrong with the bootloader or SO prefix.
At the begining its a chaos, but when you understan how it work, its very simple. And a bootloader change its only needed to change from a 2003 SE version to WM5 or 6 and vice versa, not change needed to change between WM5 and WM6 and vice versa.
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
drakic said:
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
Click to expand...
Click to collapse
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
migatxu said:
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
Click to expand...
Click to collapse
so you mean to rewrite boot loader with a02, and after that press pw+wl+reset and again go to sd loader and run wm50_k_.... OS image?
1. copy wm50_B_a02...
2. run sd loader and write this wm50_B_a02... sd boot loader
3. press after that wl+pw+reset
4. read WM50_K_...
5. hard reset
is this write procedure?
thnx
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
migatxu said:
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
Click to expand...
Click to collapse
on 1. i mean to copy all files to sd card and first upload sd loader a02 and after that go to 2.
just to be sure that we are thinking same
I know that you mean that
Can you work it out?
migatxu said:
I know that you mean that
Can you work it out?
Click to expand...
Click to collapse
well, my friend it is working, i dont know how to thank you...
one last question, what image now i have to upload on him to have wm6, or it isnt matter?
i have downloaded these images from this site:
X50v_WM6_A02_PR1
X50v_WM6_A02_PR2
X50v_WM6_A02_RC1
X50v_WM6_A02_RC2
also have this (WM6_A02_RTM_By_Maglite_-_Zeus_Alex_Change_of_PP_to_0Mb ) but don want more troubles with him.
is there any procedure which file need to be first or i can just upgrade to last OS image with all fixes?
should i download first Download Dell Axim X50v WM6 A01 ROM and then go to Dell Axim X50v WM6 A02?
thnx very very much
danijel
You beat it! A very good new Drakic
Remember, you dont need to install the bootloader anymore, only if you have problems to boot, or if you want to install wm2003se.
Well, al these roms are older than the A02 RTM, my device has it, work very good! But I only have the original A02 Maglite with the 4mb of page pool, it works fine, now, I changed the page pool to 3mb with PPFE or something like this, is in the first post. More page pool = more fast and estable system, to use with many apps at time, but less free ram, less page pool, more free ram, but... vice versa, I only open 2 or 3 apps, and for now with a page pool of 3mb works fine, like with 4mb. For the firs time install the original 4mb page pool A02 RTM and test.
Ah, you can install the A02 RTM directly
thnx very much one more time for this help and help before. you saved my and life of my axim
danijel
you've now +100 experience Its funny to test all the available roms. Have you test WM5 A03 by MagLite? I invite to you It was a pleasure, now you can help to somebody with the same problem. Enjoy your X50v, you can install three different Windows Mobile versions! That's fantastic!
Nice to help you Danijel
Miguel
yes, now i have very very experience, two weaks old dell almost dead i think i will try first that wm6 a02 rtm, and after that 0mb PP. lot of them say it works great so i will try it...
it was pleasure working with you....
hear again, hope not when i have problem
danijel
Hi,
the Elite Recognized Developer xboxmod have described how to unbrand Windowsphone 8X. There is a similar way for Windowsphone 8s. It works for my 8S CID ORANGEB10.
Requirements:
1. sdcard
2. RUU_signed.nbh and UEFI_signed.nbh extracted from RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30
Procedure:
1. Copy RUU_signed.nbh to sdcard
2. Rename RUU_signed.nbh on sdcard to RIOUDIAG.nbh
3. Power off the phone
4. Put sdcard into the phone
5. Push volume down + camera +power
6. Wait until flashing process done
7. remove sdcard from phone and copy UEFI_signed.nbh to sdcard
8. rename UEFI_signed.nbh to RIOUDIAG.nbh
9. put sdcard to phone and flash the file the same way as previous file.
10. If the phone wont boot flash RUU_signed.nbh again
11. reboot phone
can you please post how to extract .nbh files from RUU? will this method work for CID 032?
For extract you can use winrar. Or if you run ruu it will extract to C:\users\your name\AppData\Local\Temp - sort it by date and in newest folder it is extracted.
If you have cid HTC__032 you dont need to unbrand it. HTC__032 is unbranded Europe cid, you can flash it simply with Europe RUU.
thanks for your help, i tried running the ruu .exe file but gave me error [294] invalid vendor id. i am now thinking about method with memory card and extracted .nbh that you described, but i am afraid if something goes wrong because of that error ruu is reporting.
Invalid vender ID means that you are trying to flash ROM for different region with different CID. Use SDcard to flashing rom.
I have flash another 8S, so here is corrected procedure:
1. Copy UEFI_signed.nbh to sdcard
2. Rename UEFI_signed.nbh to RIOUDIAG.nbh
3. Turn the phone off and put sdcard into the phone
4. While holding Volume down + camera buttons press power button
5. Wait until flashing is finished
6. Copy RUU_signed.nbh to sdcard and rename it to RIOUDIAG.nbh
7. Turn the phone off and put sdcard into the phone
8. While holding Volume down + camera buttons press power button
9. Wait until flashing is finished than reboot phone
Thats It
I have tried 2 ROMs.
1. RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEASE
Languages:
Catala, dansk, Deutsch, English, espanol, francais, italiano, Nederlands, norsk, portugues, suomi, svenska, Turkce, arabic
2. RUU_RIO_U_APO_00_HTC_RUS_1.04.411.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEASE
Languages:
čeština, eesti, hrvatski, latviešu, lietuviu, magyar, polski, romana, slovenčina, slovenski, srpski, greek, belaruskaja, bulgarski, kazak, russkij, ukrajinska, arabic
Karel
i'm sorry for the noob question but what does this do? Can i upload games and apps that are not from windows market ?
It only debrands your phone. And you can also change language by flashing another rom. It is not a way to unlock the phone for installing unofficial applications.
oh..thank you for your answer here where i live we're lucky because by law they're not allowed to sell branded phones
Hello. Sorry for the noob question. Debranding done by the method you describe here does unlock the phone that's locked to a carrier ? Or it only removes the startup branding (removes let's say : Orange or other carrier)
Hi,
it only changes firmware of the phone. For example it removes stuff and settings of provider. And it also change language. For example I bought this phone from Orange Poland. There wasnt Czech language in this phone. I am not allowed to flash another firmware (containing Czech language) in official way becouse there is another CID. So I have to use method decribed above to flash ROM with another CID.
But this doesnt affect simlock of the phone. If you want to unlock this phone you have to buy codes. And it is not a way to unlock phone for installing unofficial (non market) application.
Karel
You may be able to save yourself a little trouble by ensuring that the card is formatted with FAT. I lost some time because it was formatted as ExFat.
This video tutorial will be helpful.
Hi;
My HTC 8S has "cid-11111111"
I'm using "RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30" version..
"UEFI_signed" file successfuly complete.
But "RUU_signed" file can not completed and then phone stuck boot logo screen..
What should i do now?
Thanks.
My 8s shows "not for resale" tag during the boot up
Is there anything i can do to make my phone like the rest?
ymskn said:
Hi;
My HTC 8S has "cid-11111111"
I'm using "RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30" version..
"UEFI_signed" file successfuly complete.
But "RUU_signed" file can not completed and then phone stuck boot logo screen..
What should i do now?
Thanks.
Click to expand...
Click to collapse
Run RUU.exe and reflash the phone. You have supercid, you dont have to use sdcard method.
windigo007 said:
Run RUU.exe and reflash the phone. You have supercid, you dont have to use sdcard method.
Click to expand...
Click to collapse
Well,
After running ruu.exe phone is reflashing, Then phone is restart and rom update utility has giving to me "Error 270".
Update Canceled on %1..
what can i do now?
thanks a lot.
ymskn said:
Well,
After running ruu.exe phone is reflashing, Then phone is restart and rom update utility has giving to me "Error 270".
Update Canceled on %1..
what can i do now?
thanks a lot.
Click to expand...
Click to collapse
Error 270 is "The image file is corrupted". Try to download the ruu file again. Btw. what is the MID of your phone? And how did it happen you have supercid?
I have a demo phone, when the phone has came to me its a supercid.
Then im trying to rom update, phone is corrupted..
Now phone is boot only white usb screen..
trying to many times download ruu file..
Can we say the phone is brick?
what is the MID? where can i find MID info?
MID is Model ID. For example PM591000. It is written on the label and also in bootloader. What about imei? Is it starting with 00?
Hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. no recovery , no droidboot.
i need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
i think the internal partition table is damaged so it needs to be rebuilt.
i have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .Raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
the device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
any budy help me
if your k004 stay at "no usb cable connected!" here is the solution
search and download this file "ME371MG_all_TW_user_V3.2.3-2.raw"
put it into sd card and insert it to k004
turn your k004 off
push "volume+" and "power" together > show "ASUS logo" STILL PUSH> show "no usb cable connected!" > release both button
push "volume+" and "volume-" together > show "DROIDBOOT" > select "SD DOWNLOAD"
choice the file "ME371MG_all_TW_user_V3.2.3-2.raw" > pray
wait till it done~
good luck
brainbooster said:
hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. No recovery , no droidboot.
I need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
I think the internal partition table is damaged so it needs to be rebuilt.
I have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... Unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
The device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
Click to expand...
Click to collapse
i have the same trouble.
Need fw dnx ifwi os dnx os image files for asus k004 me371mg
Hardware brick too!
need dnx ifwi os dnx os image files for asus k004 me371mg
have you brick your device ? hare you still on emui 5.0 beta (test key nr90d, you dont have themes and no update) this is for you !
you need : a huawei devices with unlock bootloader (search for your device on xda) a computer, a SD card (+5go)
If you are stock on NR90D :
dowload huawei update extractor (zip) on xda,
dowload the last FULLOTA compatible with your phone and the app huawei firmware finder
(it's on your phone files in HWFF)
extract it on your comuter
extract the UPDATE.APP with udate extracor to get RECOVERY.img
install TWRP on your device see XDA post
flash on recovery RECOVERY.img
put update.app on /dload/ of your sd card
launch your phone on recovery
If you are bricked :
dowload the last FULLOTA compatible with huawei firmware finder (xda)
extract it on your comuter
extract the UPDATE.APP with udate extracor to get RECOVERY.img
install TWRP on your device XDA
flash on recovery RECOVERY.img
put update.app on /dload/ of your sd card
launch your phone on recovery
sorry for my english , i hope it will hepl someone
If device is bricked how can you install twrp? Both of your methods are the same, all they are is the Huawei force update method.
here
hi !
sorry i've did'nt put thD e link
all here https://forum.xda-developers.com/nova-plus/development/recovery-unofficial-twrp-huawei-nova-t3523473
to extract
https://forum.xda-developers.com/showthread.php?t=2433454&page=1
firmware finder :
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
(yes, to get out of testing key you have to flash the new recovery of an real update and you have just to have the imei)
My point was if the device is bricked you will not be able to get to fastboot to flash twrp.
Normally , you can ...
Just tu unlock OEM unlock and usb debug
yzena said:
have you brick your device ? hare you still on emui 5.0 beta (test key nr90d, you dont have themes and no update) this is for you !
you need : a huawei devices with unlock bootloader (search for your device on xda) a computer, a SD card (+5go)
If you are stock on NR90D :
dowload huawei update extractor (zip) on xda,
dowload the last FULLOTA compatible with your phone and the app huawei firmware finder
(it's on your phone files in HWFF)
extract it on your comuter
extract the UPDATE.APP with udate extracor to get RECOVERY.img
install TWRP on your device see XDA post
flash on recovery RECOVERY.img
put update.app on /dload/ of your sd card
launch your phone on recovery
If you are bricked :
dowload the last FULLOTA compatible with huawei firmware finder (xda)
extract it on your comuter
extract the UPDATE.APP with udate extracor to get RECOVERY.img
install TWRP on your device XDA
flash on recovery RECOVERY.img
put update.app on /dload/ of your sd card
launch your phone on recovery
sorry for my english , i hope it will hepl someone
Click to expand...
Click to collapse
is that required to relock bootloader ?! (will i lose my data) ?!!
thanks !
Relock not required and yes you will lose your data