Develop Bugs

How to access the registry ?

Hello,
When starting my 9090 I get a message "Impossible to find SmartFilter.exe check the file or the access path..." and the Pocket remains stuck for a while.
I suppose the uninstall process of the trial version of this programm did'nt run complete, and left an entry somewhere.
Searching for 'smartfilter' doens'nt give any result.
Where to search for autorun/autoload folder or key in the registry ?
Thanks for any help.
Jean-Jacques

Go to \windows\startup\ and delete the shortcut for that program. I'm not sure that's your problem, but it sounds like it to me.
If not, then go to http://forum.xda-developers.com/viewtopic.php?t=7136&highlight=regedit
or search around. I know there are two versions floating on this board. I think the previous is the one I use/prefer. Also, I've been told that when connected via activesync, you can use windows regedit to access your device???? Not sure though.
Good luck, and if you muss up your device, it's NOT MY FAULT!!!!

No way :-/
Thanks, but it's a glue... :?
Neither Windows/startup nore deleting entries of NOVOSEC/Smartfilter helped.
I'm going to reinstall the trial version, and uninstall again :twisted:
JJ

Gone !
8)

go to a company called soti - they have a remote regsitry explorer that is very good..
www.soti.net

tbstart.exe?? Help?

I have hit the reboot on the back of my dell x50v and for the last couple times it says that "tbstart.exe failed to start, may need to reinstall".
I have no idea what this is and tried a search and found nothing on the internet.
Anyone have any idea what this is? I also posted another problem about my device now not recognizing my home network and says the ssid is hidden, are these two items related? I have wm5 ao2.
Any ideas?

I'd say that if everything is working the way it should on your phone, then go to the windows startup folder and remove the link to it. Don't delet it just yet, cut it and paste it somewhere that you'll remember where it is, like the My Documents folder, just in case you find out that you did need it for some program. More than likely, the reason it failed to start is because you removed the program and it forgot to delete the startup link. Don't worry that removing the link will cause your phone not to boot or something like that either because your phone is already rebooting without the program anyway.

read files from bootloader...phone stuck in calibration screen and activesync KO???

Hi to all! I installed a new cooked great rom to my trinity a month ago and it worked fine. it is this rom
[ROM][ITA]WM 6.1 Elegance edition 2.14 (OS 5.2.19213 Build 19213.1.0.0)[ONLINE]
today I got a strange error and the phone was stuck. I unplugged the battery and when I started again it was stuck on the calibration screen. if I tap on the screen nothing happens but the backlight turns on if it was off so it still catches the taps. I connected the phone via usb to delete from the autostart menu the link to the configuration screen (welcome.exe) but the phone is not deteced by activesync so no way to browse folders on my device or use a program like SOTI to control the ppc. I want to bring it back to life as I know that my files hasn't been deleted. in fact if I press the right soft button I get a menu of a program I put in the ppc and it's not included in the elegance rom so I'm sure my files and my configuration and everything are still there.
if i get a phone call the phone rings (with the default ringtone anyway, but the name of the caller is displayed correctly, that's why I'm sure my device still has all my contacts and more)
what could I do?
is there a way to edit files from bootloader? does mtty work for this? (I have no idea how to use mtty so I might be wrong) could I make a full dump, edit the startup folder and reflash the phone with all my data?
I tried to use mortscript witht the autorun feature to read a part of the register regarding the welcome file and deleting it's link in the startup folder but the sd card driver is not loaded I think as the files are not launched, while in another phone the same script works fine.
thanks in advance to all who will have time and will to help me
pcwizzul

as far as i know (not that much), reading files from bootloader is pretty impossible.
You can always just reflash. If the touchscreen problem persists, it's possible that the problem is hardware related.
Your computer should detect your device when in bootloader, and failing that, you should be able to SD flash (assuming you're HardSPL'd or equivalent, thats just what we have in the herald forum)

Thanks for your help
I'm quite sure the hardware is fine as all my problems started after a crash of the OS.
Anyone has an idea to get access to my ppc?

pcwizzul said:
Hi to all! I installed a new cooked great rom to my trinity a month ago and it worked fine. it is this rom
[ROM][ITA]WM 6.1 Elegance edition 2.14 (OS 5.2.19213 Build 19213.1.0.0)[ONLINE]
today I got a strange error and the phone was stuck. I unplugged the battery and when I started again it was stuck on the calibration screen. if I tap on the screen nothing happens but the backlight turns on if it was off so it still catches the taps. I connected the phone via usb to delete from the autostart menu the link to the configuration screen (welcome.exe) but the phone is not deteced by activesync so no way to browse folders on my device or use a program like SOTI to control the ppc. I want to bring it back to life as I know that my files hasn't been deleted. in fact if I press the right soft button I get a menu of a program I put in the ppc and it's not included in the elegance rom so I'm sure my files and my configuration and everything are still there.
if i get a phone call the phone rings (with the default ringtone anyway, but the name of the caller is displayed correctly, that's why I'm sure my device still has all my contacts and more)
what could I do?
is there a way to edit files from bootloader? does mtty work for this? (I have no idea how to use mtty so I might be wrong) could I make a full dump, edit the startup folder and reflash the phone with all my data?
I tried to use mortscript witht the autorun feature to read a part of the register regarding the welcome file and deleting it's link in the startup folder but the sd card driver is not loaded I think as the files are not launched, while in another phone the same script works fine.
thanks in advance to all who will have time and will to help me
pcwizzul
Click to expand...
Click to collapse
if the sdcarddriver is not loaded then the following will not work but give it a try anyways. make a text file "whatever.txt" no quotes then rename it to "welcome.not" no quotes then put it in the root of your storage card and it should skip the whole startup process. that is if it loads the sd card driver or you might want to think about flashing another rom

I already tried the "welcome.not" trick but got no results. I'm afraid that the sd card driver is not loaded then.
Thanks for the hint irus anyway!
Really there's no way to read files from bootloader or something similar?

not that i know of
but the fact that your issue was noticed during a rom flash
dont mean it's not hardware related
much like a heart attack which happens during a thunderstorm
dont need be related to the thunderstorm

Wait! The error never happened during a flash. I never said it. I had that rom on my trinity since a month and it worked like a charm. Then suddenly I got an error and the phone was stuck.
I have understood what you mean but at least I hope it's not a hardware failure!

Config failed (0x80070005): Access is denied

Hi there,
I have a new Q9h (my 3rd). It arrived yesterday with WM6.1. As I have in the past, I did a regiedit to remove file size limits for ring tones and alarms; then I used enableRAPI to organize my start menu.
Today, I connected my phone to my computer and figured I'd try Motorola Software Update. It found and update and didn't give me an option to back out. It seems to have applied a security patch making external registry edits through activeSync impossible and doesnt allow enableRAPI to connect.
I used RESCO registry editor on my Q and took care of the file size limit... but I am EAGER to modify my start menu.
When I run enaableRAPI (it's from the zip file with the .bat, xml and .exe files) i get this:
Config failed (0x80070005): Access is denied.
I called Moto.. they said if ActiveSync is working (which it is) this is likely something put in place to prevent hacks and means that the software is not compatible.
I am SOOOO annoyed! I spent my money on this darn phone and some a$$hole programmer at M$ or AT&T or MOTO gets to decide how I can access my stuff.
Please help. =(
thanks.

Solution.. sorta
Resco Explorer... slower than other ways.. but it works..

Installation of cab files throws errors

Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.

its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..

mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick

Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.

So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.

mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.

Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.

mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed