Hello, my youth
The problems in the Update of the Rom commentator and what caused
Standing about 69% and separates.
Very slow between 12% to 30%, when up to 69% cut Update.
Helpe Me
ERROR [226] : FLASH WRITE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any Rom
Any RADIO
Any IPL
Any SPL
No Update Anything
Hello Here a few things
Which rom you try to upgrade?
Have you Winxp or Vista?
Have you a Firewall like norton or something else (try to desactivate it)
used Windows XP
Rom Is RUU Trinity DOPODASIA WWE 3.00.707.18 6275 1.46.30.11 108 Ship
no Firewall like norton or something else
I can not update to the Rom
udK 5.1 Full Edition
HTC Trinity 3.00.07.17.PV
Trinity Bepe WM6 WWE Build 0.76
MARY V2.0.3 IS OUT
AX3L WM6 WWE v3.0.9
First try an original rom , and then upgrade to a cooked one.
I was going to the Rom of Rom cooked to original
But this problem occurred during Update Rom cooked
And UNLOCKCID Me TRINITY
I can not update to the Rom cooked Or original
There is no solution to the problem
D/L http://www.zshare.net/download/26447093779f28
its the latest official rom modified and should flash fast without getting stuck during the process, if it works out for you, reflash your ppc with any other rom.
taiseer999 said:
D/L http://www.zshare.net/download/26447093779f28
its the latest official rom modified and should flash fast without getting stuck during the process, if it works out for you, reflash your ppc with any other rom.
Click to expand...
Click to collapse
Thanks for assistance
Rom being loaded and tested
The same problem
Thanks again
Please find a solution to the problem
karmba_a said:
The same problem
Thanks again
Please find a solution to the problem
Click to expand...
Click to collapse
Try to help...
Install Olipro Hard SPL 1.20
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Then try the mtty procedure:
1) Download mtty from this forum: http://wiki.xda-developers.com/uploads/mtty.exe
2) go into bootloader: Hold side Camera and POWER buttons together and reset with stylus.
3) Disable USB Connection in ActiveSync and connect trinity
4) Star mtty - Port: USB - Baud: 115200 - Press Enter
5) enter these commands
- task 32 Enter
- task 28 Enter
- task 2A Enter
- info 8 Enter
- task 8 Enter
6) Try to reflash with an original htc rom (if you can, flash a wm5 one...)
Good Luck!
Yes Good Luck With Yuo
I do not know how I thank you
Thank you for this kind of assistance and successful
Now I can enjoy any Rom
Thank claros
claros said:
Try to help...
Install Olipro Hard SPL 1.20
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Then try the mtty procedure:
1) Download mtty from this forum: http://wiki.xda-developers.com/uploads/mtty.exe
2) go into bootloader: Hold side Camera and POWER buttons together and reset with stylus.
3) Disable USB Connection in ActiveSync and connect trinity
4) Star mtty - Port: USB - Baud: 11500 - Press Enter
5) enter these commands
- task 32 Enter
- task 28 Enter
- task 2A Enter
- info 8 Enter
- task 8 Enter
6) Try to reflash with an original htc rom (if you can, flash a wm5 one...)
Good Luck!
Click to expand...
Click to collapse
Hello Can anyone explain what the following tasks do?
- task 32 Enter
- task 28 Enter
- task 2A Enter
- info 8 Enter
- task 8 Enter
Just for my intrests...
banzro said:
Hello Can anyone explain what the following tasks do?
- task 32 Enter
- task 28 Enter
- task 2A Enter
- info 8 Enter
- task 8 Enter
Just for my intrests...
Click to expand...
Click to collapse
Basically you check security level, reformat your os partition, check for bad blocks, get info and reboot.
Here you can find an almost complete guide to known bootloader commands
http://wiki.xda-developers.com/index.php?pagename=Trinity_BootLoader
Ciao
karmba_a said:
Thank claros
Click to expand...
Click to collapse
You're welcome!
But we are lucky as a guy named Olipro has made an spl...
Ciao
Thank you...
claros said:
Try to help...
Install Olipro Hard SPL 1.20
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Then try the mtty procedure:
1) Download mtty from this forum: http://wiki.xda-developers.com/uploads/mtty.exe
2) go into bootloader: Hold side Camera and POWER buttons together and reset with stylus.
3) Disable USB Connection in ActiveSync and connect trinity
4) Star mtty - Port: USB - Baud: 115200 - Press Enter
5) enter these commands
- task 32 Enter
- task 28 Enter
- task 2A Enter
- info 8 Enter
- task 8 Enter
6) Try to reflash with an original htc rom (if you can, flash a wm5 one...)
Good Luck!
Click to expand...
Click to collapse
hi, i ve try to your solution, and with mtty i ve follow all command..
the problem is this:
i put in bootloader (hasrdspl 1.30 olipof)
and try to flash original Italian ROM WM5 but it stop ad 13% and don't wont complete the flashing..
can you help me?
sorry for my english but i am italian..
regards
You did not read all instruction before start.
Please use Olipro 1.20 or Des's SPL.
Hi... I have exactly the same problem... happened whille trying to flash my HTC Diamond (sorry for forum-jumping) EnergyROM released 7/22.; I am on WinXP, not on any USB Hub, and on Unsigned-Hard-SPL-Diamond-Olinex.
The vol down + back + reset method doesn't go to completion (I have had no issues with BsB roms so far using this method), on the Diamond it shows :
--------------------------
00018003
DIAMING.nbh - FAIL
OS - FAIL
Update Terminate
UPDATE FAIL
--------------------------
If I try to soft reset the screen shows:
--------------------------------------------
A tri-colored screen that reads as follows:
Diam100 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
--------------------------------------------
I am able to re-flash this HardSPL (and in doing so removes the ROM Upgrade Error and enter into Bootloader mode (vol down + reset) successfully.
Any rom however that I then try to flash using CustomRUU does not work, it always gets stuck at around 20% with the below error:
---------------------------------------------------------
ERROR 226 : FLASH WRITE
Flash write error happened. Pls check your PDA phone.
---------------------------------------------------------
I read that I am supposed to be trying signed ROMs that work with my HardSPL, and went to this thread to get one, but same thing it is also stuck at 20%.
http://forum.xda-developers.com/showthread.php?t=400411
Am hoping the legends in this forum somehow show up and revive my Diamond
ive se seem problem .. flashing the radio .. ive resolved flash another radio .. it still at 99% 2 minuts and 100 % reboot and normal start ...
Related
UNI.indra.AKU3.3.BETA6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Basic i-mate ROM 1.90.94.WWE
Big thanks to MAMAICH for tools, and also Helmi,xplode(for office icon), Lt.Cmdr Ivan, JWJRIGHT, Vijay,black_shadows5150,Andree,and everyone who always support me.
Fix With this release:
- CrossBow Sound Themes
- New office icon/ gps icon
- New Task manager
- Application Closed
- Better speed
Extra Tools
- Pocket Screen Capture
- BootScreen changer (sample image)
- Extended ROM unlocker/unhider
- VGA mode support (with VJ bigPhone
Know Issues
- 3G connection status shown as G not 3G
Download Here
ftp://xda:[email protected]_WWE/Indra9110/UNI.indra.AKU3.3.BETA6.rar
(52.2 MB (54,771,712 bytes)
I already upload to rapidshare too this is the link
http://rapidshare.com/files/6341730/UNI.indra.AKU3.3.BETA6.rar
if you interst to use on vga mode you can download the attachment
just copy to SD card and run it for fix phone just run VJBigphone and run it
Note : before doing upgrade .. make sure the Extended ROM is emty (use the extra tools to unlock /unhide) than del all the file on Extended ROM !
All input is always welcome .. here or pm me
cheers
indra9110
Thanks for your hard work ,and i really appreciate your rom !Thanx again!
Downloading Now...
So..many ROM for UNI..
I Love my Dopod 900.....
kemane aje dra? dari kemaren2 ditungguin aku3.3 nye ditahan tahan... selamet ye dra..
or in english:
finally...Congratulations to my bro indra...well done bro!...
wow indra is fantastis.. thx for your hard work
Screenshot please..??!!
Thanks a lot.But can you give us more detail?
indra9110 said:
UNI.indra.AKU3.3.BETA6
Basic i-mate ROM 1.90.94.WWE
........................
All input is always welcome .. here or pm me
cheers
indra9110
Click to expand...
Click to collapse
Hi indra.
I am using your R3 rom and you already released your new one....
Many thanks for your extreme efforts.
I can tell that R3 is one of the best ones... soon I will try out the 3.3 as well.
Thx again for great work.
Brgds
I would also like to congratulate and thank you for all the work you put into this. I appreciate it.
It's always nice to have something new on my Jasjar.
indra9110 said:
UNI.indra.AKU3.3.BETA6
Basic i-mate ROM 1.90.94.WWE
Big thanks to MAMAICH for tools, and also Helmi,xplode(for office icon), Lt.Cmdr Ivan, JWJRIGHT, Vijay,black_shadows5150,Andree,and everyone who always support me.
Fix With this release:
- CrossBow Sound Themes
- New office icon/ gps icon
- New Task manager
- Application Closed
- Better speed
Extra Tools
- Pocket Screen Capture
- BootScreen changer (sample image)
- Extended ROM unlocker/unhider
Know Issues
- 3G connection status shown as G not 3G
Download Here
ftp://xda:[email protected]_WWE/Indra9110/UNI.indra.AKU3.3.BETA6.rar
(52.2 MB (54,771,712 bytes)
All input is always welcome .. here or pm me
cheers
indra9110
Click to expand...
Click to collapse
after uprom finished. I can not star my o2 exec. Only show bootloader.
can you help me?
Try this buzz tools
To be clear:
It works only for "stuck at serial/usb" screen.
It will NOT work, if you are stuck at splash screen.
You ALWAYS HAVE TO TRY REFLASH prior running this tool, it will help most of the times. If flashing didnt help, run the tool.
It works on UNIVERSAL device type (maybe some others as well).
The tool does opposite of what EnterBL.exe does.
Once you ran EnterBL.exe on your Universal, it will prevent the system to boot into OS.
In such case, or after unsuccessful update, you can recover using this UNI_ExitBootloader.exe tool.
How to:
- disconnect USB cable from your device
- disable USB connection in ActiveSync
- reconnect USB cable
- wait some 30 seconds
- run the tool
If successful, device will boot itself.
indra9110 said:
Try this buzz tools
To be clear:
It works only for "stuck at serial/usb" screen.
It will NOT work, if you are stuck at splash screen.
You ALWAYS HAVE TO TRY REFLASH prior running this tool, it will help most of the times. If flashing didnt help, run the tool.
It works on UNIVERSAL device type (maybe some others as well).
The tool does opposite of what EnterBL.exe does.
Once you ran EnterBL.exe on your Universal, it will prevent the system to boot into OS.
In such case, or after unsuccessful update, you can recover using this UNI_ExitBootloader.exe tool.
How to:
- disconnect USB cable from your device
- disable USB connection in ActiveSync
- reconnect USB cable
- wait some 30 seconds
- run the tool
If successful, device will boot itself.
Click to expand...
Click to collapse
Thanks Indra. I successed. My device was started.
thank you again.
iluainu said:
Thanks Indra. I successed. My device was stared.
thank you again.
Click to expand...
Click to collapse
no problem brother
cheers
indra9110
So far it works very well, it's faster then beta5r3, icon's looks great. GREAT WORK!
P.S. You could have included Radio 1.14.10 ) !
aku 3.3 beta6
I am not able to download
Getting 'time out error'
melamud2 said:
I am not able to download
Getting 'time out error'
Click to expand...
Click to collapse
I already upload to rapidshare too this is the link
http://rapidshare.com/files/6341730/UNI.indra.AKU3.3.BETA6.rar
cheers
indra9110
Thanks Indra.
3 questions though
* What is the Big Difference between AKU 3.2 and 3.3 ?
* In AKU3.2 you fixed the 3G icon, howcome in 3.3 it is back to the wrong icon?
* Did you include the followinf patch from Helmi too ? --> Better Phone, Backlight, Power & WLan Manager on QVGA & TRUE VGA
Eelco
Congrats & thnx Indra,
These unofficial ROMs are really breathing in our Uni's a bit of new life each time. I tried all and decided to stick with yours.
Maybe you remember me posting about 'missing' SMS-s after soft reset - I'm learning - problem is not in your ROM but rather a 'feature' of Windows mobile - delayed write thing.
Anyhow, unfortunately don't have time at the moment to try on this new one before weekend - have to use my Universal in 'real life' occasionally.
However, one question - I notice that AKU 3 supports WPA2 - but how about AES encription for wireless networks. Unfortunatelly one of the most popular models of routers ISPs are giving away here don't properly supprot TKIP - leaeves me without wireless connection in alot of cases. Any pointers would be appreciated.
Thanks once more for the good work with new ROMs...
indra9110 said:
UNI.indra.AKU3.3.BETA6
Basic i-mate ROM 1.90.94.WWE
Big thanks to MAMAICH for tools, and also Helmi,xplode(for office icon), Lt.Cmdr Ivan, JWJRIGHT, Vijay,black_shadows5150,Andree,and everyone who always support me.
Fix With this release:
- CrossBow Sound Themes
- New office icon/ gps icon
- New Task manager
- Application Closed
- Better speed
Extra Tools
- Pocket Screen Capture
- BootScreen changer (sample image)
- Extended ROM unlocker/unhider
- VGA mode support (with VJ bigPhone
Know Issues
- 3G connection status shown as G not 3G
Download Here
ftp://xda:[email protected]_WWE/Indra9110/UNI.indra.AKU3.3.BETA6.rar
(52.2 MB (54,771,712 bytes)
I already upload to rapidshare too this is the link
http://rapidshare.com/files/6341730/UNI.indra.AKU3.3.BETA6.rar
if you interst to use on vga mode you can download the attachment
just copy to SD card and run it for fix phone just run VJBigphone and run it
All input is always welcome .. here or pm me
cheers
indra9110
Click to expand...
Click to collapse
Can you show me how change boot screen I-Mate by O2? because my device is O2-Exec.
Thanks
iluainu said:
Can you show me how change boot screen I-Mate by O2? because my device is O2-Exec.
Thanks
Click to expand...
Click to collapse
Follow this thread: http://forum.xda-developers.com/showthread.php?p=1069573#post1069573
and this: http://www.buzzdev.net/index.php?option=com_content&task=view&id=68&Itemid=0
WM6 Spanish Edition
Version 3.6
Thanks to bepe, Tadzio, Jasjamming.
Thanks to LVSW and mUn for their always great work.
Thanks to Ausdim for his help and fix.
Thanks to Olipro and Des for their SPL
Thanks to Cestrespeo & Racostaf for translations and test.
Thanks to Misar for his fantastic tool G'Reloc.
Thanks to Ervius for his help and his great tool Packages creator.
Thanks to aje_fr for his tool.
!!!!!!!!!!!!!OS & HardSPL!!!!!!!!!!!!!!!
Download v3.6from Rapidshare
Download v3.6from Megaupload
Download v3.5 (Ilos's Mirror)
+ Old Versions
Radio 1.50.08.11 GPS
v3.6:
HardSpl 1.30 by Olipro
OS 5.2.1933 Build 18533.0.7.0(Thanks to UDK)
Added: pocket screen capture, BTSwitch, HTC Album (tr. Racostaf), HTC Random Access, new icons on folders
Updated: WLM 10.6.33.0600, zip v903.713, HTC Task Manager v30995, Streaming Media 920.722, Some system's dll, Adobe reader v288531, Cyberon v070917, Adobe Flash Lite.
Tweaked: disable IR, rebuild customization.
Fixed: scroll bars, better BT support.
IF YOU APPRECIATE MY WORK YOU CAN MAKE A DONATION...
F.A.Q:
When you flash a new ROM, you will loose all your data!!! take this in consideration. So, you will make a full reisntallation of all your personals applications
1: To Enable The 6 Tab: (but the vibrate bug will be back too)
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHome]
"Tabsetting"="1,2,3,4,5,6"
2: ROM update Error:
-Use XP not Vista
-If you're stuck on bootloader (three colors screen showing IPL: SPL: ), start again update app without removing USB or restart the Phone
3: Startup animation:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StartupAnimation]
-pour la désactiver totalement, mettre "Enabled"=0
-pour désactiver le volume mettre "Volumn"=127
4: Backup (SPB, ...):
Never restore a FULL backup from another rom version.
AT ALL,
WE ARE ON AN ENGLISH FORUM
PLEASE SPEAK ENGLISH...
OR DOUBLE POST.
BIG THANKS.
I'm waiting...
Faman, Why don't you make a version without the Touch style?
Or say us the way to changethe masks at the phone dialer and the Comm Manager.
Thanks!
Battery indicator with numbers
Mr FAMAN it will be Fantastic a battery indicator in the top with % indicator like here
http://forum.xda-developers.com/showthread.php?t=324398
Just is only an Idea because with usual is no so clear how batery we have it.
THS for your work is fantastic.......
OK fantastic I found the .cab to put th batery indicator
http://forum.xda-developers.com/showpost.php?p=1421241&postcount=1
Thanks
Thanks Faman, I cant wait to try it...
Suggestion (all in 3.3 ROM !!)
Hi FAMAN,
Here is my wish list (anyway your rom is fantastic).
1)Ive tried bepe wwe ROM, and in HTC Homeplug the music tab is working as a ringtone selection (sound, vibrate, etc.), i rather prefer this, but is only my wish.(editing the registry IT WORKS in 3.3 !!)
2) Another sugestion from bepes rom, in COMM mAnager there is a button to switch on and off 3g, this is a nice feauture as well. (EDited: Just installed 3.3 and already includes this feature, works perfect !)
Thank u very much for your work.
waiting for that ROM ...
No se una palabra de Ingles, pero agradezco muchisimo este trabajo.
Saludos
Bizio said:
waiting for that ROM ...
Click to expand...
Click to collapse
Ready now!
Tested 3.3 - Orange M700 - Movistar
Tested version 3.3 with Radio 1.46.0.11
MMS, Camera Button, GPS - Ok
Setup Operator - button "done" does not work
Translation
Hello Faman:
This ROM is a wonder, only that in the administrator of tasks you translate the second eyelash well, because appears “excepciónes” and must put “Excepciones”.
Thank you very much.
Tested:
Setup Operator - button "done" does not work
iramirac said:
Hello Faman:
This ROM is a wonder, only that in the administrator of tasks you translate the second eyelash well, because appears “excepciónes” and must put “Excepciones”.
Thank you very much.
Tested:
Setup Operator - button "done" does not work
Click to expand...
Click to collapse
Yes, in setup operator button "done" don't work for movistar but work for orange and vodafone, i'm looking to fix it.
Trying to put this rom on my triny i've got a communication error.
Now, my triny does'n start the old 3.01 rom. It's blocked in the windows mobile 6 start screen.
Please, What can i do?
pepperm740 said:
Trying to put this rom on my triny i've got a communication error.
Now, my triny does'n start the old 3.01 rom. It's blocked in the windows mobile 6 start screen.
Please, What can i do?
Click to expand...
Click to collapse
put the device in bootloader.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
and reflash
Translation
Faman you do not forget to translate “excepciónes” by “Excepciones”
All ok! thanks
iramirac said:
Faman you do not forget to translate “excepciónes” by “Excepciones”
All ok! thanks
Click to expand...
Click to collapse
Ok, that's made for further version
for movistar, i put the cab in attachments on first page.
FAMAN said:
put the device in bootloader.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
and reflash
Click to expand...
Click to collapse
Every time i try to flash a new rom, i've got this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I obtain the same error trying to update de radio.
The Active sync is connected correctly .
Do i anyting wrong?
What should i do?
Thanks
pepperm740 said:
Every time i try to flash a new rom, i've got this message:
I obtain the same error trying to update de radio.
The Active sync is connected correctly .
Do i anyting wrong?
What should i do?
Thanks
Click to expand...
Click to collapse
I have the same error with Vista but not in Xp
Finally, i flashed my trinity from de bootloader.
Thanks to all.
i need windows mobile 6.5 for imate jama.. is any rom for this mobile out till now. except wm6.0(
ROM WM6.5 china for imate jama
http://www.rayfile.com/zh-cn/files/e25371a6-3650-11de-bf09-0014221b798a/
Language
quangbudang1 said:
ROM WM6.5 china for imate jama
http://www.rayfile.com/zh-cn/files/e25371a6-3650-11de-bf09-0014221b798a/
Click to expand...
Click to collapse
this rom language is chinese or english and chinese.
blutooth speed has been improved in this rom or not.my bluetooth speed is about 4-6 KBps.my jama has wm6.
is there any way to improve my BT speed?
WIndows Mobile 6.5 ROM for I-mate Jama Please
Can any one please post a english language version windows mobile 6.5 for I mate Jama..
It comes loaded with windows mobile 5. I installed Customized version WM 6.
But now needs WM 6.5 English ROM
THanks in advance
wm6.5
need only english rom.. cant understand Chinese.. or can any body please please please..translate it to english from Chinese ..
[WM.6.5 FOR I-MATE JAMA]
English version of Wm6.5(23001) for P30 Jama cook by lxwcd
forum for imate jama http://p30.5d6d.com/
http://www.rayfile.com/files/a2673bcf-6619-11de-bc23-0014221b798a/
how can this rom install on I-mate Jama,????????
quangbudang1'
(English version of Wm6.5(23001) for P30 Jama cook by lxwcd
forum for imate jama http://p30.5d6d.com/
http://www.rayfile.com/files/a2673bc...-0014221b798a/)
Here
http://p30.5d6d.com/thread-33-1-1.html
how can i get my usb port download address, bcz DNW.EXE not show my i-mate jama, it not show "usb ok" in titl bar, plz help
thanx for ur quick reply
help
the file cannot be downloaded..the link is down can u please please please upload it on rapid share.please..
and yes.
can u please write the instructions here how to go about it..
i cant understand Chinese .and i cant understand it after translating it..please.i would be really thank full ...
Need install RaySource_Setup_V3.1.10.8366.exe before downloading
You wait for 1 to 2 hours will
complete
http://download.rayfile.com/media/client/RaySource_Setup_V3.1.10.8366.exe
1. DNW.exe http://www.4shared.com/file/105739286/94356545/dnw.html
2.Driver http://www.4shared.com/file/105739314/aa3bd517/Driver.html
3. bootload http://www.4shared.com/file/105739145/a3cfc5aa/bootload.html
1. remove sim card ,memory card and battery
2. connect your phone to PC (when Pc find new hardware-> Driver)
3 Run dnw.exe
4. Press volume (-) then insert battery to your phone (your phone go to bootloader)
5. When the connection was successful (if you can see on the title bar show "usb ok")go to step 6.
6. select menu: usb port -> transmit -> Transmit
7. select bootload.nb0 file, wait.. your phone restart (only 15 seconds)
8. pull out the USB Step 1 to 6 again then select file Flash.bin
when completed it will restart Now can pull out the phone
only use the bootload.nb0 file for WM6.5
Good luck
(5. When the connection was successful (if you can see on the title bar show "usb ok")go to step 6.)
my DNW.EXE can not show "USB OK" how can i get "USB PORT DOWNLOAD ADDRESS" kindly help me. Is there any way to FLASH the Jama Rom with Micro SD card, i think its an easy way bcz i flash my jama rom from wm5 to wm6 with micro sd card. so if there is any way to flash jama rom to wm 6.5 with micro sd card, kindly tell me, thanx for suggestion, this forum is so nice and its member too,
Sorry
. i cant download the file.. i downloaded the rayfile downloader.. and clicked on the download button.. the application opened.but when i pressed the download button some error appeared.. which unfortunately is not in English.:. so can u please upload it on rapidshare i would really appreciate it. And yes can u please tell any method how to flash rom through micro sd card..which is lot easier then flashing through pc.. as i did from wm5 to wm6.. please.. i would really appreciate your effort.. thx in advance buddy
This rom only install from pc
press on screen "" 下载1 (RaySource 专用连接) "" to download
can u send it to me..i am unable to download.it..please sir.. please..please.. [email protected] [email protected]
how can i got "usb port download address" bcz its not show in title "usb ok" plz help me. i download every file but DNW.Exe not show "usb ok" how i resolve this problem
bestsarmast here is rapdshare link for u, download and enjoy and if u sucessfuly flash ur jama rom with wm6.5, kndly tell me the steps, bcz i can not get "usb port download address" in DNW.EXE
Download Link for wm 6.5 build 23017 TESTED
http://rapidshare.com/files/252327408/FLASH.bin
A new version of Windows Mobile is launch know as Wm6.5 Build 23034
Windows Mobile 6.5 Build 23034, the Start menu button has been moved to the bottom of the page at the top of the task bar than the previous version of the narrowing, it seems more like Android and the iPhone, also scroll dial-up panels are removed, the task bar icons have also been optimized design, these changes are designed to give users a better experience of touch operations.
Download Link for wm 6.5 build 23034 (kindly test this verson and post ur comments)
http://rapidshare.com/files/271003085/P30_JAMA6.5_23034.rar
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thx
thank u very much for the link..buddy..ok
to make ur usb status ok..
1:first install activesync ..
2: Restart your pc
3: now remove ..sim+memorycard(if any)+battery
4: connect your mobile to pc through usb data.cable
5:insert the battery
6: now a window will open..new hardware found..on that window check on the install the hardware..
7: now click on the select on choose a specific location..
8: now select the folder( where u extracted the driver..files..if u havnt done it..do it now..extract all the files.. from that driver rar.file..to any folder..note that there are again rar files in that driver.rar file.extract them to to any one place..)
9: press enter or next.. now again something will appear saying..install it anyway..dont install click on install it anyway...
10: now .. when ur driver is installed..
11:remove..battery..
12: press - volume button and insert the battery.. and open dnw..
13: in no time the status would go from X to OK
14. select menu: usb port -> transmit -> Transmit
15. select bootload.nb0 file, wait.. your phone restart (only 15 seconds)
16. pull out the USB Step 11 to 16 again then select file Flash.bin
when completed it will restart Now can pull out the phone.
i hope it works..now..i havnt installed the rom yet..it is being transferred to my mobile..it takes hell of time.. thx to quangbudang1 for the rom
sorry buddy..
when the status goes to ok..then go to usb port..and connect..then transmit..hey are u from india.. ashutos..?
im working on it.. now trying to flash the rom.. if it works will .. post again..
here is a great wm6.5 for i-mate jama final english rom cooked by me
enjoy
http://rapidshare.com/files/295830449/wm6.5_jama_final_rom_by_Michael_saad.rar
and if any one want the kitchen and dumped rom just ask for it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, thank you for shiring! I have some questions:
Is this 100% working?
What is the upgrade procedure?
What software did you include in it?
Thank you in advance....
yes it is working perfectly
the update procedure is simple just download and extract this file and follow the steps
http://rapidshare.com/files/296101681/Driver__Bootload___DNW.rar
1. remove sim card ,memory card and battery
2. connect your phone to PC
3. Press volume (-) then insert battery to your phone (your phone go to bootloader)
4. the computer will find a new hardware just choose the driver in above file
5.open dnw When the connection was successful (if you can see on the title bar show "usb ok")go to step 6.
6. select menu: usb port -> transmit -> Transmit
7. select bootload.nb0 file, wait.. your phone restart (only 15 seconds)
8. pull out the USB Step 1 to 6 again then select the rom
when completed it will restart Now can pull out the phone
about the program included . it have the basic wm6.5 program like office ; internt explorer etc.....i have just translated it .
OK, i upgraded my jama with your rom, but the build is 21840....
Can you confirm it's right? Isn't it build 23064?
I can see some words in Chinese (In Settings and in Input method)... Can You confirm it's normal?
Biker78 said:
OK, i upgraded my jama with your rom, but the build is 21840....
Can you confirm it's right? Isn't it build 23064?
I can see some words in Chinese (In Settings and in Input method)... Can You confirm it's normal?
Click to expand...
Click to collapse
yeah the original chinese rom build 21840 so when i translaed it i called the rom build 23064 but i didn't write that inside the rom
and there is afew wodrs not translated but it is not important like ril vesion and master clear
but u did't tell us u liked the rom or not?
the Rom is pratically perfect
everything seems to work properly, fast and smooth!
I'd like to have the bottom taskbar with big buttons (as I expected from 23069 build)
Keep on your awsome work!! Thank You!
P.S.: is it possible to remove chinese imput methods?
I canot hard reset, standard methods ("Master Clean 1234" and Buttons "-" + "red" + battery) seem not working...
Shutdown app is also in Chinese...
First Test
Ok, i've tested this rom for 2 daysand i encurred the following bugs:
1) Every restart i have a notification indicating that the "backup battery is very low", even if jama is full charged;
2) I can't understand how to turn off the device as the menus are in chinese;
3) I can't understand how to hard reset as standard methods seem not working.
The rom is faster than my previous wm6 and there are 60Mb of free space ; buttons, connections (GPRS and Bluethooth), wm included programs work perfectly and I tested with success the following software:
-Tomtom 7.916;
-Opera 9.5;
-Phone Canvas 4 from HTC Mega;
-iContact;
-HTC network wizard;
-Showaco reSTART;
-Showcase Taskmanager;
-S2U2, S2P, S2V;
-CorePlayer;
-SPB Mobile Shell 3.5.
Very Good Work, I hope this helps....
i just want to know if it is working for the imate 8150 too ?
because i'm searching for a 6.5 rom for my imate 8150 and didn't find anything!
aladin6 said:
i just want to know if it is working for the imate 8150 too ?
because i'm searching for a 6.5 rom for my imate 8150 and didn't find anything!
Click to expand...
Click to collapse
No, every rom is device specific....
Biker78 said:
Ok, i've tested this rom for 2 daysand i encurred the following bugs:
1) Every restart i have a notification indicating that the "backup battery is very low", even if jama is full charged;
2) I can't understand how to turn off the device as the menus are in chinese;
3) I can't understand how to hard reset as standard methods seem not working.
The rom is faster than my previous wm6 and there are 60Mb of free space ; buttons, connections (GPRS and Bluethooth), wm included programs work perfectly and I tested with success the following software:
-Tomtom 7.916;
-Opera 9.5;
-Phone Canvas 4 from HTC Mega;
-iContact;
-HTC network wizard;
-Showaco reSTART;
-Showcase Taskmanager;
-S2U2, S2P, S2V;
-CorePlayer;
-SPB Mobile Shell 3.5.
Very Good Work, I hope this helps....
Click to expand...
Click to collapse
i'm working on another rom and i will try to fix that small bugs
michaelsaad said:
yes it is working perfectly
the update procedure is simple just download and extract this file and follow the steps
http://rapidshare.com/files/296101681/Driver__Bootload___DNW.rar
1. remove sim card ,memory card and battery
2. connect your phone to PC
3. Press volume (-) then insert battery to your phone (your phone go to bootloader)
4. the computer will find a new hardware just choose the driver in above file
5. When the connection was successful (if you can see on the title bar show "usb ok")go to step 6.
6. select menu: usb port -> transmit -> Transmit
7. select bootload.nb0 file, wait.. your phone restart (only 15 seconds)
8. pull out the USB Step 1 to 6 again then select the rom
when completed it will restart Now can pull out the phone
about the program included . it have the basic wm6.5 program like office ; internt explorer etc.....i have just translated it .
Click to expand...
Click to collapse
I cant seem to follow this direction, sorry for that. I would like to ask if i could flash this directly from my current ROM (by Cotulla). I hope anyone could help me with this. Thank you!
Will be wm 6.5 for o2 xda2 mini?
Need
thanks For ROM
Wait for a long time
I want to cook the rom by my own
please upload the kitchen with template
Thanks
Can't wait for another Rom that more stable from you !!!
help
arjaylight said:
I cant seem to follow this direction, sorry for that. I would like to ask if i could flash this directly from my current ROM (by Cotulla). I hope anyone could help me with this. Thank you!
Click to expand...
Click to collapse
can someone explain me step3. did it mean to go in bootloader mode by pressing camera+power instead of pressingg volume(-)?
arjaylight said:
can someone explain me step3. did it mean to go in bootloader mode by pressing camera+power instead of pressingg volume(-)?
Click to expand...
Click to collapse
step 3 : go to bootloader mode by pressing volume (-) then insert the battery with keep pressing the volume button the mobile will stop in imate logo.
this is the bootloader mode
Clear STEP
I just want to Explain to clearly step if anyone don't know or not sure something
1. remove sim card ,memory card and battery
2. connect your phone to PC by USB without battery ,simcard and memory
3. press and hold volume (-) then insert battery to your phone (your phone go to bootloader) >> Now Screen show I-mate blue logo
4. the computer will find a new hardware just choose the driver in above file
5. When the connection was successful (if you can see on the title bar in DNW.exe show "usb ok")go to step 6.
6. select menu: usb port -> transmit -> Transmit
7. select bootload.nb0 file, wait.. your phone restart (only 15 seconds)
8. Remove the battery.
9.press and hold volume (-) then insert battery to your phone.
10. title bar in DNW.exe show "usb ok"
11.select menu: usb port -> transmit -> Transmit FLASH.bin file
then wait until you hear "Ding Dong" sound by your computer and see that your phone restart and title bar in DNW.exe show that USB is not connect>>Now you can pull out the USB and enjoy new ROM!!
Wow, i love you ,thank you very much
wm6 wast it bust my rom
i use this rom what step thy said i do it but it bust my rom
this error is coimg on my imate JAMA
**current WS is :FSN **
FSN WS Init OK.
THIS ROM VERY POOR Don't use it ok
plz plz don't use it
judinme said:
i use this rom what step thy said i do it but it bust my rom
this error is coimg on my imate JAMA
**current WS is :FSN **
FSN WS Init OK.
THIS ROM VERY POOR Don't use it ok
plz plz don't use it
Click to expand...
Click to collapse
hixx
so finally what is going on? keep download and upgrade it or stop???
Is this rom will work with jama 101?
[WWE][RUS][WM6.1][Build 21056]AndreW82 ROM[Lite][ExtraClean][version 1.4]
List of changes:
- ActiveSync via BlueTooth bug fixed
- Bluetooth dial-up modem was added in the modem list in "Add a new modem connection" under "Connection" tab
- Official keyboard resources were included (now Opal Keyboard, VGAKEY and so on works normally)
- SMS-threading mode was disabled
- USSD-service was included in ExtraClean version of ROM
- USSD-request's sound was disabled
- CamLoader was excluded from ROM (...links for CamLoader CABs you can find below)
AndreW82_WM6.1_21056_Lite_v1.4
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Contents:
Office (Pocket Word, Pocket Excel)
NetCF3.7.8345.00
"psShutXP"="0_29"
"Black_Keyboard_Skin"=""
"WM5torage"="1_9"
"WLANSettings"="2_3_0_2"
"VersionInfo_MR"="1_1_19131331_0"
"USSD_Service"="4_33_0_0"
"stk_uippc_exe"="4_65_0_0"
"STK_Service"="4_87_0_0"
"SPB_Diamond_Calculator"=""
"SIM_MGR"="6_64_0_2"
"SIMLock_exe"="4_23_0_0"
"Ringtone_Plugin"="1_0_080624_4"
"Redial"="1_2_0_0"
"Power"="2_22_0_0"
"PictureEnhancement"="1_50_18192627_c2"
"PhoneSetting"="6_23_0_3"
"Mute"="1_1_2_0"
"DRM_Middleware"="1_5_19142824_00"
"MicrophoneAGC"="0_91_0_0"
"mHub_VO"="1_7_090609_0"
"TaskManager"="2_1_35096_2"
"HTCUtil"="1_8_3_0"
"Hibernate"="1_4"
"GPS_Quick_Position"="1_0_0_1"
"FMRadio"="1_0_922619"
"Dshow"="2_0_19163629_00"
"DeviceInfo"="1_27_0_0"
"CommManager"="2_7_7_1"
"CheckAutoRun"="2_18_0_0"
"CAMERA"="6_13_32715_0"
"BluetoothSetting"="2_11_0_0"
"AutoRun"="4_31_6_2"
"AltTab"="1_0_0_1"
PagePool: 6 МБ
RAM: ~28 МБ
Storage: ~72 МБ
Download link for WWE
Download link for RUS
AndreW82_WM6.1_21056_ExtraClean_v1.4
Contents:
NetCF3.7.8345.00
"Black_Keyboard_Skin"=""
"WLANSettings"="2_3_0_2"
"VersionInfo_MR"="1_1_19131331_0"
"USSD_Service"="4_33_0_0"
"SPB_Diamond_Calculator"=""
"SIMLock_exe"="4_23_0_0"
"Ringtone_Plugin"="1_0_080624_4"
"Redial"="1_2_0_0"
"Power"="1_22_0_0"
"PowerOffWarning"="1_15_0_0"
"PictureEnhancement"="1_50_18192627_c2"
"PhoneSetting"="6_23_0_3"
"Mute"="1_1_2_0"
"DRM_Middleware"="1_5_19142824_00"
"mHub_VO"="1_7_090609_0"
"HTCUtil"="1_8_3_0"
"FMRadio"="1_0_922619"
"Dshow"="2_0_19163629_00"
"DeviceInfo"="1_27_0_0"
"ClearStorage"="1_38_0_0"
"CheckAutoRun"="2_18_0_0"
"CAMERA"="6_13_32715_0"
"BluetoothSetting"="2_11_0_0"
"AutoRun"="4_31_6_2"
PagePool: 6 МБ
RAM: ~29 МБ
Storage: ~75 МБ
Download link for WWE
Download link for RUS
Attention! Flash this ROM from storage card if yours P3300 has SPL 1.11.0000 or from PC if SPL 1.11.cmon.
AndreW82_CamLoader
CamLoader unloads camera drivers at startup and loads them only when you run Camera application. If you close Camera application, CamLoader will unload camera drivers automatically.
Nice looking rom im gonna flash it now and give some feedback by 8
Andre
Thank you and welcome my friend
test:
was nice and fast rom
Really good rom ima gonna use this one, no bugs at all really fast, excellent job
ferfecir said:
Andre
Thank you and welcome my friend
test:
was nice and fast rom
Click to expand...
Click to collapse
Hi, ferfecir!
pablo34 said:
Really good rom ima gonna use this one, no bugs at all really fast, excellent job
Click to expand...
Click to collapse
Thanx! I'm glad you liked it.
PS. Russian version uploaded, link is in the first post.
Hi AndreW82,
thanx for your excellent ROM. Great job. No probs so far.
And lots of RAM available. I like your ROM very much.
Regards,
John
thanks a lot
was waiting for a lite 6.1 wm rom since long time
flashing--------------.............
Great job brother
Thanks for your hard work
Nice work, mate.
Can you make and M2D version with new Manila 2D v2.0 build 19191432 from HTC Mega?
nemur said:
Nice work, mate.
Can you make and M2D version with new Manila 2D v2.0 build 19191432 from HTC Mega?
Click to expand...
Click to collapse
I'll think about it.
2 ALL: ExtraClean versions WWE and RUS uploaded. Links are in the first post.
Your rom is fast and stable and only thing that missing is m2d.
Simply the best rom ever. Not for the ram.... Not for the speed... But because it can connect to my uni's wifi through cache! congrats dude! Only thing missing if i may say so is Quick GPS as the SeaSGEE doesnt update, at least i think so.
Thanks
Спасибо! Очень понравилась твоя работа - без излишеств. Творческих тебе успехов!
Thank you
Thank you AndreW82 for ROM.....
error 228: Invalid file size
Hi,
When i tried to flash the rom i got error [228]: invalid file size.
I was trying with RUU utility from my pc.
Please advice.
Thanks,
Sudheer
Very good job Andre!
It would really beat with M2D.
sudheer.konudula said:
Hi,
When i tried to flash the rom i got error [228]: invalid file size.
I was trying with RUU utility from my pc.
Please advice.
Thanks,
Sudheer
Click to expand...
Click to collapse
AndreW82 said:
...Attention! Flash this ROM from storage card if yours P3300 has SPL 1.11 or from PC if SPL 1.11.cmon.
Click to expand...
Click to collapse
You need to flash SPL 1.11.cmon first, or you can flash my ROM from memory card.
hey andre i am not able to connect internet in my artemis through dial up from others mobile after flashing your rom becouse bluetooth option is not available in add a new modem connection under connection tab of your rom. so please do something for this problem it is very argent.
hey andre i am not able to connect internet in my artemis through dial up from others mobile after flashing your rom becouse bluetooth option is not available in add a new modem connection under connection tab of your rom. so please do something for this problem it is very argent.
for those who do not know ( as I did not) how to flash via SD card
see
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
which containes this below and other info
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader, make sure to format in FAT32 and not FAT although in some cases format doesn't work, also it is only necessary to format if your first attempt at flashing fails
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Power & Record buttons and using the stylus at the same time to press the RESET button at the left side), keep both buttons pressed after releasing the reset button.
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts. After the flashing process is complete, it will tell you to press any button to continue. After this the bootloader screen with its red/green/blue color is shown. Just reset the device and it will boot the new ROM.
SuperCID devices are able to flash any NBH image using this method.