Develop Bugs

device hangs for few seconds on power on

this problem is occuring with the new roms , it s quit irritating... how to solve it ??????????????????????????????

Got the same over here
Trued allot of roms bud still didn’t got a good one
When you have afresh rom installed
It looks like it gone work properly it reacts fast like it should be
Then when you install your favo aps lik battery pack or spb
It still works oke the signal strength is maximum
Bud if its on for a day it’s terrible
Y think something in the rom making it hang
To bad there isn’t any task bar ap so you can see what’s making the universal hang
Still looking for the right one

i meant right after power on ... device is not responding
i didnt mean slowness after a while due to loaded program memory, i meant TOTAL hanging / stop responding of the whole device for few seconds right after you power it on .... ??????

We need more information such as...
What ROM version are you using?
What softwares do you have installed and running?
Does a hard reset solves the problem?
Did it ever occurred before this?
Did you install something different this past few days?

do you have software at the today screen which is installed on SD card?
if yes, remove from today screen or install to main memory...

le_toubib said:
this problem is occuring with the new roms , it s quit irritating... how to solve it ??????????????????????????????
Click to expand...
Click to collapse
Are you using Wisbar Lite ???

AKU/cashe ????
when i press the power button the screen goes on , but no icons are responding at all , untill few seconds...
it occured with "JASJAR_ME_13082_171_10900_wwe_ship"
also with the recent o2 rom
the new arabic i-mate rom
but it didnt occur with older roms
also it occured in a baby windows ( before installing anything )
i believe it is related to the AKU2 , i think it is related to a change in cashing or so ....
many thanks for reply

One more idea: about the same happened to me when I installed the new Qtek ROM.
After a while I found a note on these forums that it is advisable to remove SDDAEMON.EXE from the startup. It was causing a lot of duplicated notifications, and my device was hanging frequently.
So I deleted the SDDAEMON link from startup. Since than it's all OK !!

Please help, NO WIFI ON UNIVERSAL :(

Worked ok last night, then it crashed (mad colours on screen), so I had to do a FULL restore of radio and rom (seemed to be stuck in bootloader).
So, reinstalled everything, all good, I just cannot get it to turn on WIFI. I go into comm manager, click on wifi, and it tries to turn it on, then comes back with a X next to the icon.
Also the front today screen plugin (the wifi/bluetooth one) doesnt say WIFI: off anymore. Just has Bluetooth:Off
Any ideas
THANKS!

Try to flash back the rom again..
By the way, what rom do u used?..

I only just flashed it again ..
I used the O2 rom 'Xda_Exec_Upgrade_v1.30.162'
Can you recommend another ROM that might fix it?
Also, does reinstalling a ROM reinstall all the drivers? As I've noticed some things stay resident even after a flash; call timers for one..
thanks

while im waiting for replies, im going through roms
trying different AKU ones now from the ftp
could it be a radio issue?

My QTEQ 9000 are on the same situation, made some stripes on the screen and now can´t detect anything!!
The wifi apears I start it but can´t get any signals!!
Any help please?????

i upgraded radio to 1.14 and still same

Try these ROMs
You can find on the forum, Ivan's and Helmi's ROMs.
They are the latest AKU 3.2 and seems to work just fine as O2 ROMs are just AKU 2.X!

I think the problem lies deeper than a hard reset/rom as well, it must do after installing 3-4 roms, and a couple of radios.
Yes ive tried UNI_AKU3_5_WWE_IVAN_Test2 ROM as well.
Same.
Anyone else got any solutions as to what it might be?

installing the latest qtek rom off buzzdev now, includes full radio/rom/ext rom. if this doesnt work, then f**k it, ive spent enough hours on it, and i'll just get a new one on contract tomorrow.
thanks for the people that replied

what about the driver disk, isnt there a wifi thing on there
maybe im dreaming

Have a look in the network adapters list and see if the Tiacxwln card is listed, if not sounds like it is a hardware rather than a driver problem. It's not unheard of for computer hardware to fail for apparently no reason. This is likely if you have tried different ROMs and none of them work.

I´ve tried upgrade radio to 1.14 and I tried Ivan's and Helmi's ROMs.
and the problem persists!!!
Tiacxwln card is listed.
Strange situation because during one year worked very well and suddenly make some stripes on the screen and now don´t detect nothing!!
Maybe antenna problem??
Help us??

Is there a problem with o2 official rom?.. Heard few people also got a problem if flashing to o2 rom..

Nope, not working, tried qtek roms, a new orange rom, still wifi not coming on.
Yes the card does show in network cards.
Oh well

Any help Please???????????????????????????????

B&B V4.0 crashes while booting

I tried to disable BatteryStatus(from today), and after some SR its still GOOD!!!
PROBLEM SOLVED
"Hello,
I have a lot of hours behind me, because of working on my problem.
I did not found any solution, but i would like to share my experiences...
Symptom:
After some soft reset the pda can't boot. B&B v4.0 os loader image could be seen...
I tried install my programs in a lot of variation, but after some soft reset, the system fails while booting...
I dont know what is the cause of the problem.
Tried flash with art_htcwwe_11240501_026790_wwe_ship, after uspl, flash with 4.0. Same.
Tried to take the device into boot loader, change the splash screen, it hepled once. After the next SR same problem.
I have HTC Artemis (from HTC, not from any distributor)
Some ppl have written for me, they are fighting with our problem, please write here...
thx"

I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye

Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
yes, i used bb 3.7 before too...

Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?

dzign-it said:
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
Click to expand...
Click to collapse
I tried without any change of BatteryStatus settings...

xmas said:
I tried without any change of BatteryStatus settings...
Click to expand...
Click to collapse
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?

zsitvayb said:
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
Click to expand...
Click to collapse
Downloaded again. The size of the file from an other mirror is the same.
off
Jah, lehet ezt nem töröm annyira , Bájtra pontosan ugyanakkora, de az önkitömörítős exe amúgy sem indulna, ha hibás lenne a mérete.
on

similar problem
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help

maxi_boy said:
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
Click to expand...
Click to collapse
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical

I have the same problem.
First time was after plugging in my SD card to install tom tom.
2nd time was after uninstalling the 3.7 boot dialer.
A reflash fixes this but obviously it would be better if there was a proper fix which did not brick my phone each time I add an app!

the issue might be with time/date settings
maxi_boy said:
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
Click to expand...
Click to collapse
i've just tried not to change time/date settings and everything works fine...

Yesterday, it happens to me too.
But with a hard-reset I've solved the problem.
I think I've got the cpu scaler with the turbo boost on.

Same here...
Hard reset brings the phone back to life. But when doing a install of an app and doing a Soft Reset he dies again...
Makes the ROM as good as useless for me.
I'll try a reflash and see what happens.

Today another time.
I've ran sprite backup and when the artemis reboots to make the backup the tomtom installer has beguin to reinstall itself. The backup has been interrupted and has made a soft-reseft. Them I sohuold to hard reset.
today I hanvent the boost option, only cpuscaler was on.

This is mostly due to the kaiser home plugin - it does not like to be hurried on boot. So no overclocking on boot - so untick remember last cpuspeed and overclock after reboot and do not use traylaunch part of bs - also causes lockup. Works on my rom.

But I've reporduced the problem without overclocking...
I think it's not an overclock problem.

Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.

ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
I have also over clock, pc synch and exchange synch. I also had to re-flash. however, seems that it works very well if I flash HTC boot image after B&B4 before any other apps. now,I have BB4, HTC boot screen and all apps I like, and ... have SRed many times

ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
,
The splash screen couldnt be the reason for crashing.
(i think there is a chance to brick again after some soft reset)

Same thing happen to me
Same thing happen to me, after instal everything on my device, after couple of softresets (becouse of installs) i though that eyerything is ok. But when i was trying to change biotouch setting, and then soft reset the device it didn't boot enymore. That's one bug in tom's rom that i have found, only one, but irritating. I think that biotouch setting was the reason of lockup aftersoft reset, hopefully i have full backup before this change, so i make hardreset and restore everything

Won't wake up after app install?! HELP!

Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter

Hard reset
Odisej said:
Hi,
I just got some new applications and installed them, the last one was InterKey(Paragon software). After finishing the install it requested restart and restarted after clicking OK. Now it just won't wake up to windows and get's stuck on "smart mobility" after the "by bepe" and HTC logo...
It should install on the SD card, but I also tryed removing it, but it is just the same.
What to do, I don't wana flash it again, because of all the data, so please advice, if there is another way...
I'm using bepe rom (latest I think), about the radio I am not sure...
Regards,
Peter
Click to expand...
Click to collapse
Try a hard reset....

well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter

I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.

What ROM
Odisej said:
well... since I need the phone feature, I'll do that... it's the same like flshing, right? Everything's lost after hard-reset...
btw, does anyone know, how to set a different alarm ringtone?
Regards,
Peter
Click to expand...
Click to collapse
Whos ROM are you using?

Try Karmba
tommylad said:
I am experiencing a similiar problem on the Trinity. If I install a new fresh ROM (Ive tried several, currently running Marys) and then install a few normal applications (tomtom, Googlemaps, Messenger and so on) after a few days it wont start up after switching it off.
A hard reset solves the problem, but Im starting to get a bit tired of doing a hard reset every other week.
I tried to roll back to the factory default firmware (witn no GPS activated) and then installed MunRus's newest..however the problem came back after a few days use.
Click to expand...
Click to collapse
Try the Karmba_a 3.0 ROM very good

I'm using bepe's rom 3.00.751.10 and radio 1.38.00.11
Regards,
Peter

Weird upgrade bug

Hello,
Today i wanted to try the new 3volution rom for the s620 when i got an annoying bug
I spent most of the afternoon looking for an answer but found none.
Everything works well in the beginning until i got to push the center button for the screen to turn white. It turns white indeed but then activesync desynchronizes and doesnt resync anymore, so im unable to upgrade (either it stops at 3% or with kavana's doesnt detect old rom) and in some cases it says the new flash rom is corrupt..
Its like my 5th flash, and prior to today i never had a problem flashing and upgrading
So i tried reinstalling activesync multiple times, changing cables, even hard resetting my s620 (i got the nrg rose 1.7 rom on it), i even restored my comp on a previous state.. nothing
It just keeps breaking the sync when i push the center button and doesnt resync for the rest of the procedure
If someone has an idea im all ears ^^ and sorry it it has been already posted

Welcome to forums
Try a hard reset or reinstall ROM
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Hope it helped,

redownload the rom. then read this http://forum.xda-developers.com/showthread.php?t=493266
3% freeze up it very common

I am seing something similar. If I set my device down without locking it the screen goes completely white. When I first loaded the rom it didnt do it for about a week and now it does it everytime. The only changes I've made since loading the rom is that I installed Google Maps and TCPMP.

Hmm its very weird, i did the hard reset.. well it didnt work..
The 3% error i got that only once
I tried installing the official htc 6.1 windows mobile rom and got the error 244 ...
and same as always, the moment the screen turns white it disconnects from activesync and doesnt reconnect. Imho XP needs reinstalling..
So my theories so far are: activesync is buggy to the core. Ill try flashing on my laptop as soon as i get to it.
Also one thing ive noticed: in all my previous flashes i had the original htc battery.. now i got an extreme energy battery with a blue and white sticker, ill try replacing the original battery before reflashing.
As i said in my first post, this is not my first flash, and i have flashed before to kavana's then rose then kavana's again and it always went smooth.
I have been using the S620 for like one year and a half and never had a prob.
Its an htc version and it was not locked; anyway in belgium locked phones are forbidden to sale
Greetings from the land of the beer and thanks to the developpers

Which Bootloader are u using ?
The official shipped one or the modified one ?

Hmm good question, where can i see the version ? When it boots up i see the nrg rose 1.7 black screen with white writings.
Another weird thing: my keyboard is azerty, so prior to hard reset i had a language pack for french keyb, after the hard reset my keyb works just fine without any language pack installed ... not that it is a problem but i just dont understand ^^