Develop Bugs

Activ Sync - Critical communications error! Help!!!

Just hard reset my spv m2000 and tried to access files through activ sync, but getting this error "Critical communications services have failed to start, try resetting mobile device, then connect again"
I have do several times!!! I'm using activsync 3.8.
Can anyone help please:-(

Unable to sync since downgrade to WM2003
I'm having the same issue with my SX66, "Critical communications services have failed to start, try resetting mobile device, then connect again" This started since I upgraded the system ROM only; using mamaich WM5 ver3 patched. There were some issues and I didn't have time to work with the ROM so I downgraded to WM2003 using WM5_mamaich_patched. It is connecting, but it won't sync; from what I can tell when I reinstalled activesync 3.8 from 4.1 it didn't overwrite several of the 4.1 files. I don't know if that is an issue. I have attached a log of the activesync log. Any help would be appreciated.

Re: Unable to sync since downgrade to WM2003
rdloar said:
I'm having the same issue with my SX66, "Critical communications services have failed to start, try resetting mobile device, then connect again" This started since I upgraded the system ROM only; using mamaich WM5 ver3 patched. There were some issues and I didn't have time to work with the ROM so I downgraded to WM2003 using WM5_mamaich_patched. It is connecting, but it won't sync; from what I can tell when I reinstalled activesync 3.8 from 4.1 it didn't overwrite several of the 4.1 files. I don't know if that is an issue. I have attached a log of the activesync log. Any help would be appreciated.
Click to expand...
Click to collapse
Did you follow this for Downgrading to WM2003SE..?
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Active Sync 4.1 still works for WM2003SE too.. But you do need to be using Service Pack 2 with it..
Would recommend un-installing 3.8, restarting the PC, installing 4.1, deleting any partnerships you have on Active Sync before partnering your device again..
Hope this helps..?

Reinstalled ActiveSync 4.1_WM2005 and patches
I have original downgraded because WM05 start button was so slow but the patches fixed that. ater reinstalling Activesync 4.1 WM05 patches and fixes, it seems to be working ok I will just have use it awhile and see how everything works.
THX for your input 8)

losing active sync connection just before updating

Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu

I had the same exact problem. I can't pinpoint what exactly is going wrong (i just got my 8525 a few days ago, and decided to mess with it, so I'm a complete noob at this) but what I did was just use one of the repackaged versions. That did the trick for me D:

I am confused. If you mean you run a rom upgrade and then plug the phone in, then it is doing what it is supposed to do. You should fully sync your phone then run the rom upgrade. The upgrade will disconnect activesync and then put the phone into bootloader and run the upgrade.

gehu0003 said:
Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu
Click to expand...
Click to collapse
It's an activesync problem. Either delete activesync and re-install it and then, try it again and it should work or try it on another computer

compudds said:
It's an activesync problem. Either delete activesync and re-install it and then, try it again and it should work or try it on another computer
Click to expand...
Click to collapse
Also make sure you have installed HardSPL first.

gehu0003 said:
Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu
Click to expand...
Click to collapse
ok people notice how gehu0003 states "SIM unlocked!"......thus he most probably has a different bootloader.......1.40.olipro im willing to bet.
gehu0003...please do the following:
update to HardSPL v7 : This will make sure your SPL is up to date.
then
go to THIS THREAD....and download the DOPOD WM6 ROM. Use this repackaged ROM since it has CustomRUU which will recognise your updated SPL version. Enjoy.

thank u guys. i am fine now with the new HardSPL.

hey guys,
i'm having problems with this too, it disconnects me while i try to update to the hardspl.
any ideas?
thanks

how it worked for me
i had the same problem, while flashing rom, just before entering bootloader mode with some rom's it would disconnect and drop the usb conection. to fix it, now i enter the bootloader manually : press and hold (on) and (ok) buttons and reset with the pen. it should enter bootloader mode and in my case it doesn't drop usb conection to PC and allow me to reflash
cheers

Software Corrupted

Hi friends,
I got HTC S620 Smartphone from my brother US. It was working well for the past 6 months and i updated to WM6 also now suddenly it got corrupted and shows the following error. It takes 30 min to boot and hangs with this following error. i Unable to do anything. I tried to update WM6 again but same still same error. I gave it to HTC service center in chennai and he unable to resolve this problem. And I Unable to open folder with usb cable. Any one please help me.
t-zones
While retriving the URL :
http://wap.t.zones.com
the following error occured:
Network error 19:
The Attempt to connect to the server failed
More Information Try Again
Alert
Cannot Start 'winwapexe'. A critical component
is either missing or failed due to low memory.

Try to upgrade to the HTC rom, it should be in this forum and I think its the second one on this page... Just look up and you should see the guide to upgrading your rom...

Read the topic that says guide to upgrading from WM 5 to WM 6 (or something along those lines)...

Hi I already Installed WM6 and after this problem again i done WM6 update. I have a doubt with this update. And i Unable to Open Windows Mobile folders from my computer also Active Sync unable to connect with Mobile. But i can receive the call and make answer to them sometime( even Hanging condition).

I-Mate PDA2k Upgrading problem :(

Hi all dear masters,
I was trying to upgrade my Imate PDA2k, it was failed and now it's not booting.. In the screen, just a "SERIAL" appearing and changes to "USB" when connected to the PC... I tried to upgrade again but now, it says "COUNTRY ID ERROR N-N-12-12-12" and aborting...
Is there anything that I can do?
Any help would be appreciated..
Thanks...
Sorry, I found WM6 upgrade and mtty1.2 and process brought my PDA back... Thank you..

I have the same problem
My mda compact 2 starting playing up yesterday, rebooting on its own, so I tried to install the upgrade from tmobile (ruu charmer). The upgrader stopped and my mda now has a screen that only either says serial v1.02 or usb v1.02.
I've tried rebooting it several times in several different ways without any joy, the screen just remains the same. I tried connecting to my laptop via active sync, but its like it doesn't exist anymore!
In simple terms, could someone please explain how to fix our problem.

Error wifi when upgrate wm6.0 standard to 6.1 Kavana

hi all!
i have error with HTC s620, i try intall wm 6.1 Kavana, and successful, but when i check connect wifi ok, but access 15 munites so auto off power...???
i tryed 2 times, but not ok,
more: GPRS ok, phone ok
thank for all ideal!

wifi auto off or phone auto off?