Hey !
I've flashed several found-on-xda-developers-homecooked-ROMS and so far, everuthing went fawlessly (known bugs exepted)
For now i'm usig schaps' 3.60a WWE ROM, best ROM I've ever used.
Now, my problem is : my voice calls are disconnected when my TOMTOM 720 tryies to download traffic datas from the internet (e.g. it establishes a data connection)
Furthermore, the always on connection i chose whith shchaps' configurator seems to get disconnected when TOMTOM tries to connect.
So, to the questions :
- Does anybody knows how to have data and voice simultaneously for exemple when using a TOMTOM device
- Why on Earth is a perfectly working 3G connection get disconnected to establish a new one with the same provider ???
Thanx everyone, keep up the goog work !
Related
Hi guys,
Got my Artemis (in the form of an XDA Orbit, UK) a few weeks ago. Everything was fine until a few days ago. These are my possible Internet connections:
1) ActiveSync
2) WLAN
3) GPRS
(and I'd use them in that order too).
However, everything stopped working - even when #1 or #2 were connected, it'd always try to bring a GPRS session up when I tried accessing something requiring an Internet connection (eg. QuickGPS, IE), and not provide a data connection either.
Has anyone else had a similar problem or know what the cause is? I've been through all the screens/etc, but can't find anything that would explain the problem.
TIA,
G
Hi,
I have a new O2 Orbit but its connectivity to GPRS, WiFi and via cable/ActiveSync is driving me mad. In turns one or all of them don't work without me making any changes. O2 support have suggested:
- setting the username/password for GPRS, WAP etc - tried
- cleaning the SIM card - tried
- Hard reset - not tried yet, I don't want to have to re-install all the apps
This forum has suggested setting the setting the second drop down on Network Management to My ISP instead of My Work Network (which seems to be a WAP network). That helped for a while then it stopped.
GPRS thinks it has connected (showing the G icon with various arrows) but just doesn;t transfer any data.
Is this a hardware fault? I have a good signal on WiFi and GPRS but connectivity just comes and goes.
Any ideas?
Jon
It also forgets http proxy settings on the work connection when you run Internet Explorer. So annoying! The orbit is unusable if you need to set a proxy for your wifi.
I am having problems of GPRS connecting when i don't want it too!
Does anyone know of an app or setting that will make the orbit require authorisation to go connecting to GPRS? So i am in control of when i spend money!
I've been looking into this myself and found this on another forum.
CLICK HERE
I have just installed it and it works perfectly.
doublehard said:
I've been looking into this myself and found this on another forum.
CLICK HERE
I have just installed it and it works perfectly.
Click to expand...
Click to collapse
excellent mate! ... just what i need..
cheers for that!
Using an O2 XDA Orbit - flashed with the WM6 ROM posted in the other sub-forum.
Although it's configured for GPRS and this works ok (push-email, web browsing etc) it seems to 'lose' the connection on a daily basis requiring a soft-reset in order to bring it back.
No programs stop working, still get the big G symbol, but if I say launch Internet Explorer to try & restart GPRS it just sits there saying connecting ....
My guess is something needs to be 'tweaked' to ensure that I don't lose the connection ... any ideas ?
Cheers
Mark
First of all thanks to Schap. I am using schap's compiled WM6.
I have 2 small problems.
The first one is:
I setup a WIFI connection, than launch the application which will use Internet!
(I.Explorer or VPN, etc..)
When I do some request from any application, my PPC tries to dial a number to connect via EDGE, GPRS or HSDPA, even PPC is already connected to Internet!!
The internet explorer downloads the page without any problem but at the same time i always cancel dialing via gsm or umts line.
Is there any way to make PPC avoid dialing a connection when I connected wia Wifi???
The second one is:
I have the latest version of Trinitiy with 400Mhz Samsung and 128Mb RAM. But since i cracked and reinstalled WM6 instead of WM5, it works slowly. I clicked to Start button, menu scrolls in 3 seconds. It is like running vista on pentium III processor. Is it normal? or I made a mistake during configuration?
Is it possible to upgrade RAM?
Regards to everyone...
For your 2nd problem, can you try to disable cleartype and touchflo ?
Thanks..
Now it is working faster. But i have always the same problem concerning the wifi issue...
When I am connected to the internet via Wifi or activeSync the bottom of IE says "Connecting ... 0 KB." At the same time it tries to connect via 3G, GPRS or EDGE. Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried everything on connection->settings. But still tries to connect via cellular line even there is a connection to internet!
Rizzis said:
First of all thanks to Schap. I am using schap's compiled WM6.
I have 2 small problems.
The first one is:
I setup a WIFI connection, than launch the application which will use Internet!
(I.Explorer or VPN, etc..)
...
Click to expand...
Click to collapse
I think i have the same problem, but in my case, it connects internally, so, when i click the internet button, i get a delay of like 15 seconds before to get any screen. this is happennig recently... it was working fine until 1 or 2 days ago... i have the proxy settings on the internet connection... im thinking that this maybe related.
Hi bro
i ve installed wmwifirouter on my hd touch and it works perfectly first time , but when i want to go to wifi settings in comm manager it doesn t give me anything except wmwifirouter interface .
Now the wifi for my hd is wmwifirouter !!!
did it replace my wifi drivers by its own ?
Also another thing , when i reboot my hd and start wmwifirouter , my laptop is autimatically connected with wmwifirouter hotspot and have no connection to internet ,even if it is connected over 3g or hudpa .
Last thing , i cleared storage then i reflashed my hd and all these issues with wmwifirouter are still there !!!!!
Really i can t understand why ????
Excuse my bad english and hope to have an answer brothers.
Thank you a lot in advance
Bluetooth HD & WMwifirouter
I'm also having problems, but just to prove that it wasn't dutty's rom i went back to the stock rom, cellular binded to wifi works, but cellular binded to bluetooth does not.
Does anyone else have similar problems.
When i set up bluetooth as a wireless connection it finds the Hermes running WMWifirouter, but doesn't load any services and the Hermes never ends up listed as a device i'm connected to, though on the Hermes, it shows the HD as connected, and the Dialup Networking Service as being selected