Develop Bugs

KPN MMS / QTEK 9090 - does not work

Hi all, I have got 15 QTEKS 9090 on my desk
:shock: (Unfortunately they are not for me.. ) :?
all with MMS enabled, and nothing done with the standard ROM from KPN.
All GPRS and MMS settings are installed when hard-resetting the device.
When trying to send MMS, it will keep the msg in the outbox.
GPRS connection is made, but nothing is send, you can see a little brown box with an arrow pointing out
But the msg is not send.
Wondering through the internet, I cannot find anyone who posted this problem/solution.
Looking at the KPN site i can see different settings
KPN site: Port 5080
QTEK settings: Port 9201
And on the gateway
KPN site: 10.10.100.20
QTEK: 10.10.100.10
Please let me know if someone has read this problem and if there was a sollution
Thanks you very much

There is a solution for this problem;
- http://www.pocketpc-club.nl/forum/showthread.php?t=48837 (Dutch forum)
- http://forum.xda-developers.com/viewtopic.php?t=15196&postdays=0&postorder=asc&start=25
- I fixed my MMS problem !
I remove the MMS Composer program 2.0.0.16 from the extended ROM and replaced it by the 2.0.0.13 version and MMS is working again.
Easy to do !
1. use the XDA-developers_unlocker
2. extract the MMS cab file from the previous version of the extended rom that you could find on the XDA FTP site (112121WWE)
3. edit the config.txt of your actual extended rom to use the 2.0.0.13 cab file
4. replace the 2.0.0.16 by the 2.0.0.13 version
5. do an HARD reset (you have to re-install your applications!)

THANK YOU VERY MUCH!!
I actually learn more than i bargend for!..
Now my PDA rulez! 8)

Didn't work for me
Which setting do i need for kpn
Looking at the KPN site i can see different settings
KPN site: Port 5080
QTEK settings: Port 9201
And on the gateway
KPN site: 10.10.100.20
QTEK: 10.10.100.10
Anything else important ?

I'am trying to solve it with a KPN guy, ill post the solution

Update to MMS Composer 2.0.0.21

How to use a Trinity, but using TyTN settings for your Service Provider

Hi all
I use a Trinity WM6 (bepe's rom) and I would like to use the WAP Portal of my Service Provider (Orange Switzerland). I can access the portal, but it's only a text based browsing. All WM5 Orange branded phones or Nokia phones can access the portal with picutres, nice colors and watch Live TV.
As my Trinity is not Orange branded (they don't even sell it here in Switzerland) I can't access the colored portal and can't watch TV
I tried changing some registry settings like:
HKEY_LOCAL_MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ Internet Settings\ 5.0\ User Agent\Default -> Wert: Mozilla/4.0
and
HKEY_LOCAL_MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ Internet Settings\ 5.0\ User Agent\Post Platform -> PPC; 240x320; SPV M3100; OpVer 12.16.5.111
As you can imagine, Orange ignores these settings and still recognizes, that I use a Trinity and not a SPV M3100 (HTC TyTN).
Does somebody knows, what I could do to "pretend" that I'm surfing on their WAP Portal with a SPV M3100?
Any help and hint is very appreciated!
Cheers
Jarvis

I <think> it is something to do with a special configuration file within the Orange ROMs. Updating the ROM removes this file, so preventing access to OW
There have been a lot of posts here and on Modaco about trying to access Orange World (the 'enhanced' WAP site), but I'm not sure if anyone found the fix.

NeilM said:
I <think> it is something to do with a special configuration file within the Orange ROMs. Updating the ROM removes this file, so preventing access to OW
There have been a lot of posts here and on Modaco about trying to access Orange World (the 'enhanced' WAP site), but I'm not sure if anyone found the fix.
Click to expand...
Click to collapse
Hi Neil
I don't know if this might be the reason. All Nokia and SE phones (unbranded) can access the enhanced wap portal. On an older WM5 version you could do the registry change and that worked out to access OW.

I've had better luck in
HKLM\Security\Internet Explorer\User Agent
The key to change is Custom
Try using some values from other similar devices on your network

OW
questsin said:
I've had better luck in
HKLM\Security\Internet Explorer\User Agent
The key to change is Custom
Try using some values from other similar devices on your network
Click to expand...
Click to collapse
Hi questin,
Thank you for this hint! After months of trial and error now it´s working.
Thanks again for your help.
Cheers
Jarvis

VPA c GPS with Vodafone live! browser.dll Probs

Hello trinity-users!
I've tried to get my "VPA compact GPS" with WM6 working for "Vodafone live!" a lot of times.
I used differnet User-Agent-Strings like:
Vodafone/1.0./HTC_MERCURY/2.04.162.1/Mozilla/4.0
Vodafone/1.0/HTC_v1510/1.23.163.2/Mozilla/4.0
and I tried a modiefied browser.dll from a Vodafone branded Palm 750v and the browser.dlls from this Thread: http://forum.xda-developers.com/showthread.php?t=305008
Only with the edited browser.dll for palm 750v I get into the Vodafone live! portal, but It won't load correctly and there are no HSDPA-contents shown! The User-Agent-Strings don't really change something...
I want to get this $h*t running on my trinity. I hope someone can help me...
Greets Brianius
My Device:
VPA compact GPS (Trinity of Vodafone Germany)
bepes WM6 ROM GER 0.79 light VC

Hi Brianius,
You were not clear on which browser.dll file you are using. Did you simply download one of the attached files in the mentioned thread, or did you extract the file from your rom, make the adjustments, and then overwrite the file on your phone?
It would be useful if browsed to http://www.useragentstring.com/ on your trinity and pasted the value for "Your User Agent String:" in this thread...

Hi jamesbest, thanks for your answer!
I used an edited one from a german board. They used one of ZAKv3 Image and changed the User Agent String to the Palm 750v.
If I take this browser.dll : Palm750/v000 (compatible; MSIE 6.0; Windows CE; IEMobile %d.%d)
Today I deleted the UAS from the dll and now I can change it in the registry.
But always only black letters without pictures on Vodafone live!
Maybe I should use bepes 0.79 browser.dll, but I don't know to extract it from the Windows.nb file.
My current UAS: Vodafone/1.0./HTC_MERCURY/2.04.162.1/Mozilla/4.0
edit: I tried other edited browser.dlls from schaps and AKUs ROMs

I think there are two problems from your response. 1) you may be using an incompatible browser.dll file. 2) the user agent string is not being recognised by vodafone's site.
1)
So if I have understood correctly, you are using a browser.dll file you downloaded from a website - and this file may not correspond to the one that originally came with your rom? I would recommend, downloading the rom you have currently installed on your phone and editing that browser.dll file. I dont know if there is a new easier way to get at the file, but I do the following:
download nbhextract: here
download imgfs_tools_182: here
download the rom you currently have flashed to your phone
locate the file RUU_signed.nbh (or similarly named - its the biggest file)
"nbhextract RUU_signed.nbh" - creates an OS.nb file (might be named slightly differently)
"nbsplit -hermes OS.nb" - creates OS.nb.extra and OS.nbh.payload. Since this is the trinity forum I have used the -hermes option. I am not sure which flag to use for Palm750v. An appropriate search of the Palm section might help here...
"ImgFsFromNb OS.nb.payload imgfs.bin" - creates imgfs.bin
"ImgfsToDump imgfs.bin" - extracts rom files to dump directory
Within the dump directory should be another directory called "browser.dll". In this directory will be the browser.dll file.
Then you can modify the browser.dll file as described here, and copy it back to your phone. I find the easiest way to copy the file over is to make a CAB installer that will copy and overwrite the file to your \Windows directory (using wince cab manager or a similar program). I dont think you can simply copy the file using activesync.
2)
Once you have a working browser.dll file, you may want to try different user-agent strings. It is best to change the UA string to a simulate a phone model that can definitely access vodafone life (see vodafone's website for a list of supported phones). On my trinity I use the Nokia 6233 UA string. I have made a cab of this file and attached it to this thread. To test each UA string is correct, go to http://www.useragentstring.com/ and double-check the string appears as it should.

THX!!!
Thanks a lot jamesbest!
I will try it today and give response if it works!

My solution
Hello brianius and all other users.
I had the same problem for a long time, esp. with WM6.
So here is my solution:
You need a regeditor.
Go to :
HKLM/Security/Internet Explorer/User Agent
there you have to delete everything, instead of the entry CustomBase.
The Data for it have to be: Vodafone/1.0/HTC_MERCURY/2.04.162.1
With these settings almost everything is working fine for me.
Working stuff:
- Live! Portal, coulored, with pictures
- Live Streams aka LiveTV
Not working
- Downloading music, esp. ringtones
So for further questions, please ask me.
I try to help you.
If you will find a better User Agent string, esp. one with ringtone support. Please post it here

Hey, I had a lot of things to do, but today I have handled to get the browser.dll from bepes ROM.
So I overwrote the User Agent String apart from the "%s" of the dll by 00s and now I can change the UAS in the registry "HKLM/Security/Internet Explorer/User Agent/Custom".
With the "Vodafone/1.0./HTC_MERCURY/2.04.162.1/Mozilla/4.0"String Vodafone live doesn't work.
I want to have Vodafone live with HSDPA-content like "broadband Mobile TV".
Does anybody know a UAS (by Vodafone!!!) of a HSDPA enabled phone?
"Vodafone/1.0./<Phone>/<Version>/Mozilla/4.0"
I wonder why the original String by Vodafone of the Trinity, doesn't work with my WM6 ROM! How they can distinguish between the ROMS?
The original UAS: "Vodafone/1.0/HTC_v1510/1.23.163.2" -> I get only black letters with WM6 by bepe!
Does anybody have an idea?
Thanks a lot!
PS: Sorry posted this first in the wrong Thread... =)
edit: I'm trying with pieplus, now... -> Doesn't change the UAS!
edit2: Interesting site: http://www.seehowitruns.org/pages/javascript_properties.php?choice=604&prop=2

WORKS!!!
YEEEHAAAA!!!
This String: "Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 6.8) Vodafone/1.0/HTC_v1510/1.23.164.7" WORKS!!!
I've putted it into the Registry (HKLM/Securitiy/InternetExplorer/User Agent/Custom) and Vodafone live is coloured!!!
But there is still no HSDPA content. Only normal UMTS mobiletv! Maybe I'll find a better String....
@arndti: Ringtones are working,too!
Now I have only to fix my Stremplayer, which gives an errormessage "The file "rtsp://195.179.[...]" cannot be opened. Maybe because of an security certificate or one of its components couldn't be started...try to reinstall" ~translated from ger
BIG Thanks to jamesbest and arndti!!!

This string works almost fine for me.
I don't know what the HSDPA-content should be, i even never heared of it.
For me mobile tv is working, after I have changend the conection of the streaming player to Vodafone Live!.
But still I could not download any ringtones.

The VPA compact V is HSDPA enabled by Vodafone, so I will try this String later:
"Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.6) Vodafone/1.0/HTC_Kaiser/1.56.165.5" -> works!
cya

arndti1981 said:
For me mobile tv is working, after I have changend the conection of the streaming player to Vodafone Live!.
Click to expand...
Click to collapse
Yes, my problem was that TCPMP has changed the file associations and i deinstalled tcpmp. So there was a error message.
Now I changed to Stream Player and if I klick on a MobileTV link the Streamingplayer starts, but nothing happens... If I try to connect manually, the message: "Verbindung fehlgeschlagen" (~connection error) apperas!
edit: The Straming Player works now, but it stops buffering at 94%...
edit2: I've done all told in this thread: http://forum.xda-developers.com/showthread.php?p=1904190
...but still the Streaming Player stops at: 94-97%!

Okay now I played a bit in the registry strings: "HKLM/Software/HTC/Stream/..." and got it loading 100% now , but no video appears and after 1 sec Streaming Player crashes.
Can somebody help me?
I have checked the following things:
---------------------------------------
- installed the cab of this thread.
- overwritten StreamingPlayer-files in "/windows" with that from bepes 0.79 ROM (full)
- searched for missing dlls -> I already had all dlls.
- changed the User Agent String in "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Int ernet Settings\5.0\User Agent\" to the same like IE has. *
- tryed Streamingplayer.exe from this therad
- ...
---------------------------------------
*my String: "Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 6.8) Vodafone/1.0/HTC_v1510/1.23.164.7"
I'm still trying to get it working by changing registry strings of StreamingPlayer...
Hope somebody has an idea...
--------------> OKAY: Fixed the Streaming Player (old Theme but works!) =)
Big Thanks for all your help!!!

Telstra WM6.1 Rom?

Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!

you can set all those things up yourself you know!
And i doubt we should expect a 6.1 telstra/imate rom again considering they dropped the phone before christmas.

ok .. then why dont you post all the reg settings / mods etc?

well mine works cause i hunted down the solutions myself and got them, like you should do instead of expecting someone else to do it for you!
its really not that hard! the vid stuff i got from whirlpool.
Search and ye shall find

Attached is a zip file containing the entire telstra ext-rom, this should contain any of the cabs you need.

Telstra
zathire said:
Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!
Click to expand...
Click to collapse
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)

you only need the reg fix (if not already enabled) then choose the band then load in the gprs/3g modem settings and the proxy.
that telstra cab loads a tsk and sets the home page to the old wap site, the proxy manager is kind of cute if you are too lazy to load the proxy back in although the only thing you need the proxy for is to use whereis and some of the other crap telstra services.
The proxy will just slow down msn and general internet use.

fadge said:
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)
Click to expand...
Click to collapse
thought id attach the cab you mentioned...

RE:
hey guys, sorry I haven't replied until now, I've been fairly busy with work and the family.
OK Lets say I wanted to cook up a rom myself. Where can I find a clean wm6.1 rom and a kitchen to cook it in? I would have already probably cooked up a rom myself by now but it's hard to find a nice clean ROM and kitchen to use.

st3v3 said:
thought id attach the cab you mentioned...
Click to expand...
Click to collapse
What directory in the phone do you copy it to? Is it supposed to recognise it straight away or do you have to execute the file in the phone once you've copied it over??
manbarepig. XD rawr

Opera 9.5 beta doesnt connect, but everything else work

Hi guys
I ll make a new thread for my question, I first asked it in the CT's 6.4 rom thread but actually it s not related.
I have tried 4 different ROMs, all using Opera9.5 beta
CT's 6.4, Syrius, Sone and Nataly
I have exactly the same problem on all of them.
All my applications can access the internet, including IE but Opera fail to connect....
When I try to open a web site, it take some time, and it finaly write
ERROR!
The remote server refuses to perform the request. This address is not available.
bla bla bla bla
bla bla bla bla
bla bla bla bla
But if I connect to my local Wifi, then everything work, including Opera.
So I guess it is a problem of connection with my provider.
I am French, and my Provider is SFR
I have a wap access, when I do the auto configure after the first start, I just have to go in the settings and change "Access point name:" From "websfr" to "wapsfr" ( I can setup the proxy or not, it gives the same result )
I know I have a limited access to the internet, for exemple I dont have the pop3 access.
But if IE and old version of opera are working, I guess there's no raison opera 9.5 doesnt ....
Any idea ??

Co2_13 said:
Hi guys
I ll make a new thread for my question, I first asked it in the CT's 6.4 rom thread but actually it s not related.
I have tried 4 different ROMs, all using Opera9.5 beta
CT's 6.4, Syrius, Sone and Nataly
I have exactly the same problem on all of them.
All my applications can access the internet, including IE but Opera fail to connect....
When I try to open a web site, it take some time, and it finaly write
ERROR!
The remote server refuses to perform the request. This address is not available.
bla bla bla bla
bla bla bla bla
bla bla bla bla
But if I connect to my local Wifi, then everything work, including Opera.
So I guess it is a problem of connection with my provider.
I am French, and my Provider is SFR
I have a wap access, when I do the auto configure after the first start, I just have to go in the settings and change "Access point name:" From "websfr" to "wapsfr" ( I can setup the proxy or not, it gives the same result )
I know I have a limited access to the internet, for exemple I dont have the pop3 access.
But if IE and old version of opera are working, I guess there's no raison opera 9.5 doesnt ....
Any idea ??
Click to expand...
Click to collapse
do you configure static ip address?
If yes, this is the key... It's a known bug of new WM builds...

no, i dont configure static ip ?
If I should, tell me what I have to change please

Co2_13 said:
no, i dont configure static ip ?
Should I ?
Click to expand...
Click to collapse
no you don't... i was thinking about it... i have to see why

If i can give you more details, just ask
Tonight, I ll try to use a friend's Sim in my own phone...
So after that I will be 100% sure it is because of my provider.

I tried with another Sim, same provider (SFR) but with a regular wep access and it still doesnt work ...
Can it be the Radio ? i use 1.00.25.05
Btw, if I do a hard reset do I loose the 4gb on the external memory ?

I tried the hard reset ... Didnt fix anything.
It's crazy, there must be a good raison ....
I flash my phone with any ROM using opera 9.5 and I have everything working perfectly except Opera that can t connect at all ...

I can't F$ck^ng beleive it ....
My first feeling was good.
I am reading on the web SFR doesnt allow that browser we have to edit the user agent string ....
.... trying right now .....

From another forum said:
As user of Opera (rev 405), i managed to get Vodafone France properly rendered on a P3600 (Trinity).
What i did:
opera:config as URL
In "User Prefs", you search for those 2 values:
UA MIDP Profile -> Put your preferred UA
UA Phone Software -> Put your preferred UA
In "Network", search for :
UA Post Platform -> put "PPC"
UA User Agent Platform -> Put your preferred UA
My UA that works perfectly is the KS-20 (LG):
"Mozilla/4.0 (compatible; MSIE6.0; Windows CE; IEMobile 7.6) Vodafone/1.0/LG-KS20/V10b Browser/IEMobile/7.6 MMS/LG-MMS-WINCE-V1.0/1.2 Java/LGVM/1.0 Profile/MIDP-2.0 Configuration/CLDC-1.1 UP.Link/6.3.0.0.0"
Perhaps there is less modification than the ones listed but configured like that, it works like a charm for me on Vodafone (tv, music..) and the Web
Click to expand...
Click to collapse
I hate those stupid people who are happy to put limitations everywhere ....
Btw, this work perfectly ....
They just made me loose 6 hours trying to figure out why my opera wasnt working.

Co2_13 said:
Hi guys
I ll make a new thread for my question, I first asked it in the CT's 6.4 rom thread but actually it s not related.
I have tried 4 different ROMs, all using Opera9.5 beta
CT's 6.4, Syrius, Sone and Nataly
I have exactly the same problem on all of them.
All my applications can access the internet, including IE but Opera fail to connect....
When I try to open a web site, it take some time, and it finaly write
ERROR!
The remote server refuses to perform the request. This address is not available.
bla bla bla bla
bla bla bla bla
bla bla bla bla
But if I connect to my local Wifi, then everything work, including Opera.
So I guess it is a problem of connection with my provider.
I am French, and my Provider is SFR
I have a wap access, when I do the auto configure after the first start, I just have to go in the settings and change "Access point name:" From "websfr" to "wapsfr" ( I can setup the proxy or not, it gives the same result )
I know I have a limited access to the internet, for exemple I dont have the pop3 access.
But if IE and old version of opera are working, I guess there's no raison opera 9.5 doesnt ....
Any idea ??
Click to expand...
Click to collapse
You have to configure a custom user agent :
1. open Opera
2. go to "opera:config"
3. click on "user prefs"
4. find an input called "Custom User-Agent" and type in "HTC_P3700 Opera/9.50 (Windows NT 5.1; U; fr)"
5. scroll down and click on save.
6. Restart opera.
This works for me

Co2_13
Co2_13, did you try configuring you're sfr internet connection manually ?
Mine automatically recognised the sfr settings but I preferred to go & do it step by step & was able to have full control over it, deleting all websfr parts & making sure my phone only went via wapsfr.
There's a decent guide on a french htc diamond forum :
Paramétrage des connexions et services SFR
voir plutot "Partie 3 paramétrage manuel pour les puristes"
maybe ca va t'aider, en tout cas il est bien de faire comme ca & moi je suprime tout paprametrage de websfr pour eviter les mauvaises suprise (factures ridicules etc)
http://forum.xda-developers.com/member.php?u=1099693

MERCI!!!!
THANKS!!!
You both save my life!
short way: install both cab: http://dl.free.fr/getfile.pl?file=/1XdDcFkE
MERCI RALFRED!