I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
i use my car charger from my gps that is the Holux 236, the only think i have to do so that it starts charging is turn it off on the button and the led will change to orange, i have tried one other charger that has a usb plug and it worked fine ! So has long as it has a usb plug you'll be alright and if you do not find one look for the Motorola car plugs that it will probably work on Uni since it has a mini usb plug
The charger from M3000 works fine with my Uni
And the Motorola Mini-USB chargers doesn't work...
Hi, I found that this issue is connected with proper usb cable not with charger itself (usb mini have 5 connector but in some cables only 4 are connected and in some other cables all 5 are connected and so are the difference). I was also trying many chargers and no luck. But I ve tryied charger with other cable and suddenly all chargers start charging my jasjar.
Anyway, the bad thing is it stops whitout any reason so now charging jasjar in my car is a real mystery for me.
regards,
Piotr
Be careful if buying one with a double USB output - I bought a few different models hoping to power both Exec and the Holux GPSlim-236, but all failed. They would power the Exec, but as soon as the Holux was connected, it would always cause the Exec to continually reboot - fortunately "soft". Make sure the supplier will take them back if it doesn't work.
Try a car charger with a USB socket on the end that takes a separate Sync/Charge cable.
The problem is, the exec is very power hungry, especially when the batt is dead !! you need a high current charger at least 1A (1 amp) the charger used with the blackberry (I forget which model) is suitable as is the genuine exec charger obviously.
use O2 Atom car charge
O2 Atom car charge will work with O2 Exec as well as A/C charger from Atom
Exec/SPV car charger...
Got an o2 branded one today for the Exec/Mini - works like a charm (Charges my SPV and runs Tt at the same time) but cost me £14.99 for the privelage!
could you post a link to the website? I would love to purchase one but am currently located in Singapore and so far all the charges don't seem to work for me.
vapor said:
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
Click to expand...
Click to collapse
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
southernint3l said:
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
Click to expand...
Click to collapse
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
vapor said:
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
Click to expand...
Click to collapse
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
southernint3l said:
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
Click to expand...
Click to collapse
sounds great. I have gotten your email and replied. Hope we can come to a decision soon and I can get my hands on the charger.
if anyone else has any for sale, do let me know as well.
Car Charger for UNI - how to make working
Hi All!
I've also tryed 2 diferent car chargers and 1 USB Pluggable Car Charger (some noname chineese 3-rd party) with 3 diferent cables, and one 3-rd party AC Power Charger. They ALL worked strange.
I can confirm that to make them all work I should:
1. Switch off the Universal;
2. Plug in the chgrer in to Universal;
3. Wait until the Red Light on.
Now I may turn the Universal On, and see the "Charging" battery status.
The reason and how to fix:
As you may see I used different adapters. All they have from 0.5 to 1.0A output circuit. But, the USB ports I used with my laptops have only 0.5A output and always start charging the Universal.
So, I dont think the output power is the reason.
The most likely - it is the "5-th pin" issue, which is mentioned above here. Can somebody provide information about power connection for the Universal?
It seems the solution is about to interconnect/short circuit 2 wires in the car adapter' cable to make the Universal charging in a usual way with any of my (your) "non-working" car adapters.
Also, I've noticed, that in a case the battery level around 30% and I plug in the "non working adapter" and no red light and system not is in the "Charging" state -- the battery is charging anyway!
Also, let me remind you about another issue that the Universal have: Active Sync (older versions) would not sync (USB Device not recognized error) if you plug in the Universal if the power is On.
To workaround that you have to switch off the Universal, plug the cable and after that you could successfully sync. The same symptoms? May be the same reason?
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
man why is it such a complicated issue to get the universal to charge? and it seems that this charging problem only happens to the universal and not any other device, am i right?
nabuhonodozor said:
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
Click to expand...
Click to collapse
YESSS! I Have upgraded to on of that Aku3.2 recently! May be it is the reason! But, my original Power adapter still charges my Uni so does the USB conndction to the laptop...
To ALL: Could you please confirm that you can use third-party adapters with the older ROMs?
hopefully we can get some updates soon.
Are all chargers alike?
Are all chargers the same? I would think that the USB power rating would be the same. So, I should be able to charge the Jasjar using a charger for a Motorola RAZR (if I weren't so afraid of blowing up the Jasjar)
Hi,
Can I use the USB charger that I usually use for my old WM HTC Kaiser?
I ordered my HTC Kaiser from UK, and UK has different stop contact
Thanks.
Yes you will Just take microUSB cable from HTC Desire and plug it in Kaiser charger. You always can buy an UK to EU plug converter.
And it should work the other way around as well, right?
Indomitable said:
Yes you will Just take microUSB cable from HTC Desire and plug it in Kaiser charger. You always can buy an UK to EU plug converter.
Click to expand...
Click to collapse
It should work, I used my BlackStone wall charger maybe 20-30 times for one year. Most of the time I charged my last phone using Car charger and connected to PC/Laptop.
Hey guys, just wondering if anyone else had a similar problem..
Everytime I connect a car charger, it charges for a second then disconnects itself, the charger is still plugged in, and the engine is running. The red light on the charger is on too. I'm not saying this is a ROM problem or anything at all, but its the second charger I've had that does this, I don't suppose anybody knows a fix if it happens on other devices too?
Is this an official HTC charger?
I know it sounds silly, but most cheap unbranded car chargers cause all sorts of problems. It's usually that they don't short the two data pins, so that the phone thinks it's plugged into a PC. It will then only charge at half rate (500mA) in line with usb standards.
Also, the charger may not even be able to handle a 500mA output, which would suggest why your phones sees the charger, measures the output, sees it as insufficient, and stops the charging. Is there a sticker on the charger starting current output? They can still be misleading though.
An official HTC car charger (just like the mains wall charger) will have it's data pins sorted out. The phone will detect this, and switch to mains charging mode, and draw the full 1000mA. You may have noticed that your phone will charge twice as fast off a mains wall charger than it will from being plugged into a computers usb port.
Trust me I've thrown out about 3 of the cheap ones! Even charging at 500mA, your phone will still not be getting enough juice to do google maps navigation with GPS.
Hope I've helped.
Sent from my HTC Desire using XDA Premium App
It's a cheap eBay one, but I've bought from the company in the past...when I had an iPhone And it worked perfectly. The first charger had a label saying it's max was 500mA. That lasted about 20 minutes..Need it so much more recently because of my battery drain problem http://forum.xda-developers.com/showthread.php?t=996938.
I had no idea HTC sold official ones (seems I lack common sense), will give them a go, at least then I'll get a decent warranty if it doesn't work...
jimster4389 said:
It's a cheap eBay one, but I've bought from the company in the past...when I had an iPhone And it worked perfectly. The first charger had a label saying it's max was 500mA. That lasted about 20 minutes..Need it so much more recently because of my battery drain problem http://forum.xda-developers.com/showthread.php?t=996938.
I had no idea HTC sold official ones (seems I lack common sense), will give them a go, at least then I'll get a decent warranty if it doesn't work...
Click to expand...
Click to collapse
If its a USB charger try a different USB lead. When my Desire arrived brand new the lead would only work properly when I bent the lead round the back of the phone otherwise it would start a charge (LED would light up red, phone says charging) but the battery % would never get any higher. Bought a new official HTC lead and problem solved.
I've managed to slide the 3 point UK plug off without any problems but can someone please tell me how to swap the British connection for the European 2 point plug connection please??
Hi,
That is clearly the wrong plug adapter. It looks like just a standard travel adapter that you plug the UK plug into or something (making the charger stick further out from the wall)? If anyone does know where to get proper interchangable adapters please let us know - I have the same problem with having a euro plug (which looks the same as your top one but with the bottom one's prongs) and wanting an NZ/Australia one. You can buy a travel adapter set from HTC that includes all of the plugs, but it also includes another charger and is rather expensive (http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=196228&phone=196001). It's actually cheaper to just buy one of their new style ones it seems (http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=201954&phone=196001).
Alternatively you could buy a 3rd party microUSB charger - just make sure the charger is rated for 1A or it will charge slowly.
edit: Looking carefully it looks like you might have the adapter plug for the new style charger rather than the old style charger - the plug on the picture looks rather similar
Sorry I can't be more help,
Regards,
Anthony
Ahh I see. I think I'll just stick with the 3 point plug and get another travel adapter.
Can't believe Orange have sent me the wrong kit.
Anyway thank you so much for taking the time to post. Appreciate it.
Hi,
I have an HTC phone with its AC Adapter rated at 5VDC - 1A. I also have an old Motorola dumbphone adapter rated at 5VDC- 850mA. The thing is, I realized that the connectors resembled each other and when I tried to plug the Moto into my HTC I found that it was a perfect fit.
I'm wondering if anyone knows if the difference in currents can damage the battery on long-term charges, or if it will just take more time to charge? I verified and they are both 5-pins and I tried plugging into the wall for a second and my phone indicated that it was charging.
What's the opinion of more knowledgeable people here?
Thanks!
You're fine, it will just charge slower.