Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rs314.rapidshare.com/files/102261908/RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Hi Folks,
Firstly many thanks for everyone's freely given time! Great Forum!
There seems to be a lot of confusion about who and what can be flashed with the German official ROM and then with Bepe's creation.
Can we try to clear some of the ambiguity for us simple folk? Might stop some of the repeated questions littering threads in both related artemis sections.
So, many thanks to anyone who can clarify the situation by providing definitive answers to the following questions!
(1) Can an 02 Orbit from, say, the UK or Holland be flashed with either the German and/or Bepe's ROM, even if it is CID Locked (i.e. same devcie and carrier, different country).
(2) Can a non-Orbit O2 device be flashed with either the German or bepe's ROM, even if it is CID Locked (i.e. different devcie but same carrier).
(3) Is there a fall back Rom available for non-German O2 Orbits should the upgrade fail?
Again, many thanks for your time.
Cheers - Adam.
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Pocha said:
Hi people, when I tried to upgrade to wm6, I recived a msg telling me "wrong vendor", but when I bought my HTC, it was free, no carrier sold me this device...
Click to expand...
Click to collapse
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Take a look to this post http://forum.xda-developers.com/showthread.php?t=299154 I tried it, and now I have wm6 on my HTC P3300, it's true that you can't have upgrades to radio or extrom, but meanwhile I can use wm6
kaemon said:
Same here...
any help anyone ?
By what i read "wrong vendor" means CID locked right ? but what EXACTLY is CID locked definition ?? i CAN put any sim card inside my HTC P-3300, whether from SFR operator (france) or Proximus (belgium) one... so why do i have this wrong vendor when trying to upgrade to WM6 german rom ?
Click to expand...
Click to collapse
cid = country id i.e. locked to that country/language/vendor thats why cid needs unlocking before flashing diff any of aboves roms.
imei checker
is it just me or is any one on this forum a bit sceptical of a merchant who so brazenly operates their business under the assumption that all potential customers are all fraudsters/criminal scum? is there no - more customer friendly- merchant who can perform this much valued service?
my first serious post!
xan
My HTC has no vendor since I can use all SIMs from different vendors, now I upgraded from HTC Spanish version to HTC WWE version, so Vendor and Language (plus location?) locks are disabled?
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.[/Q
HI I TRY TO FLASH MY HTC P3300 (BRICKED) WITH FACTORY ROMS AND NEGATIVE RESULT THE PROCESS STOP AT 2%.
CAN ANYBODY HELP ?
Click to expand...
Click to collapse
Hello,
I would like to Upgrade my O2 XDA Mini S with Windows Mobile 6 (localized / German version). I hardly searched for such a WM6 Upgrade but there seems to be no final version for my device and german language.
I figured out that there is an WM6 OS Upgrade for the XDA Orbit and XDA Trion (coming soon). Might it be possible to flash only an OS-ROM for WM6 extracted from one of these O2 ROM updates? I was able to extract the OS-Image and I already backed up my current ROM using aWizard. aWizard also supports flashing a single OS-ROM only.
Some people in this forum already said I might brick my device. Is it possible or not to flash the OS ROM? Is it risky to give it a try?
Do you know a final working German Upgrade for the XDA Mini S (Qtek 9100)?
Best Regards
Gabriel
Hello
I am in Bootloader mode right now and I started the updater but it says it can't connect. I see the device in Windows and my Artemis says it sees a USB connection (it says "USB" on the bottom of the screen in the white stripe).
What do I have to do for it to start working for a change?
I think I found the problem: First, it would be wise to close mtty . Then it is important to reboot and after entering Bootloader mode to connect USB not while booting. After trying it a dozen times it suddenly worked.
Please, could someone explain how I can unlock the CID with USPL? It starts the batch, when it's done I have a black screen with the Linux penguin and it says loaded. When the RUU tries to connect, though, the device doesn't respond. So I take it the process doesn't actually get finished...
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Hi I Try To Flash My Htc P3300 (bricked) With Factory Roms And Negative Result The Process Stop At 2%.
Can Anybody Help ?
Just to inform you guys that i tried the USPL Method 3 times and always got an error message UPDATE ERROR (i think it was error number 270 ??).
Well, that was because after the DOS mode went until 100, and the dialog box for the ROM Update Utility appeared, this dialog box ask to wait for the PDA to be activesynced before presing the "UPDATE", so i was waiting for the PDA to reconnect to activesync (while in a black screen mode) before pressing update . THAT was the mistake. Don't wait for it to RE connect to activesync (strange right ?) and just press the NEXT and UPDATE without waiting anything.
THEN it worked i just upgrade to WM6 without VENDOR ID error anymore thanks to the USPL method
just got a dopod m700 for my wife i know it is a g4 ppc hence will this zip file work on it to get the cid unlocked or do i have to follow a similiar procedure as i had to for my wizard
sorry i got my answer
please ignore my earlier question
fout said:
I think this sticky has become useless, there is a reasonably fool-proof way to flash CID locked devices these days
Click to expand...
Click to collapse
Hi there,
any pointer to this fool-proof way?
A foolish GioVAX
****ed up my artemis with this rom by upgrading stucks in loading mode WM6 screen. Can access bootloader but it always tell me upgrading again that i have the wrong rru....
CAN ANYBODY PLEASE UPLODE THE ORIGINAL WM5 ROM in GERMAN by htc for Artemis
(NOT Orbit oder MDAIII)
OR where can i get the original rom to downgrade????
Please help
thanks
Last night I flash my Dopod M700 to WM6 but after reboot it only enter to the boot flash screen showing IPL SPL 1.11 OS 3.7 etc......
I did unlock the CID but the flashing of WM6 seems not ok.
Then I enter to the bootloader mood and flash the WWE WM5.0 of HTC M700 rom. It did turn the M700 back to WM5.0 and then I flash it with WM 6.0 again.
However, I forgot to unlock CID again before flashing. Then now the device stuck in the boot screen with SPL 1.28 OS 3.7 etc......
I still can enter to bootloader mood, but I have tried to heal the device by flashing it with the WWE WM 5.0 rom of HTC M700 again. But it cannot be flashed again!!!! Error message came out that the rom is not for my device!!
Help!!!!!!!!!
Is the wm5 wwe rom the factory rom for your device or are you from another country?
ok, i just want to clarify a couple of things before i go and try an upgrade.
i have o2 uk wm5 xda orbit. from the link below
http://wiki.xda-developers.com/index.php?pagename=Artemis_Versions
ARTE200 O2 UK O2 XDA Orbit UK QWERTY Unlocked OS 5.1.342 (Build 15096.3.0.0) 1.25.206.2 10/04/06 WWE 1.25.206.101 02.67.90 4.1.13.28 Yes
Click to expand...
Click to collapse
shows that the ROM/device (whichever) is UNLOCKED.
now is this sim unlocked or CID unlocked or does both mean the same, I have tried a Vodafone sim in my device and it worked ok, I want to upgrade to WM6 but i dont want to screw with my device as i use it daily.
can anyone tell me if i have a CID unlocked phone.
cheers guys.
All O2 Xda Orbits are SIMUNLOCKED, but there are CIDLOCKED!
CID Lock V SIM Lock
AFAIK....
CID Lock - means the device is locked to the ROM either by your carrier, if you have a GSM company provided/branded handset (e.g O2, T-Mobile et.c)
SIM Lock - means the service provider will not let you use the handset with another SIM card i.e if SIM Locked, you may not be able to use another service provider SIM on your handset.
I believe O2 now ship their phones SIM UNLOCKED (which is a great thing), therefore you can insert a T-Mobile, Vodafone, Orange et.c SIM into the handset they provided and it would work, however the handsets are CID Locked, so you cannot flash the ROM to another...unless of course you want to try pof's method.
......my 2 cents
joey jojo, I had the same dilema as you. Only difference is I "bricked" my phone by not planning ahead successfully. The best route I would suggest, from my own painful experience, is to pay the £20 to imei-check and get your Orbit CID unlocked first. That way you can flash away to your hearts content if/when a better ROM comes out.
The mistake I made is I flashed a WM5 HTC ROM using pof's method ( worked like a charm i must add ) to test if it would work. Everything worked OK. Then I went on to flash a WM6 ROM. What I failed to realise is that after the ROM is flashed the CID Lock is back in place and you need to then flash AGAIN with the USPL update before flashing to WM6. I failed to spot this and flashed my Orbit to Brick mode. Thankfully O2 have now repaired it under warranty, I have unlocked it with imei-check and now run BEPE's WM6 ROM with no problems at all. WM6 is SO much fater than WM5.
The choice is yours at the end of the day. Your phone.............hope this helps.
Shand359 said:
joey jojo, I had the same dilema as you. Only difference is I "bricked" my phone by not planning ahead successfully. The best route I would suggest, from my own painful experience, is to pay the £20 to imei-check and get your Orbit CID unlocked first. That way you can flash away to your hearts content if/when a better ROM comes out.
The mistake I made is I flashed a WM5 HTC ROM using pof's method ( worked like a charm i must add ) to test if it would work. Everything worked OK. Then I went on to flash a WM6 ROM. What I failed to realise is that after the ROM is flashed the CID Lock is back in place and you need to then flash AGAIN with the USPL update before flashing to WM6. I failed to spot this and flashed my Orbit to Brick mode. Thankfully O2 have now repaired it under warranty, I have unlocked it with imei-check and now run BEPE's WM6 ROM with no problems at all. WM6 is SO much fater than WM5.
The choice is yours at the end of the day. Your phone.............hope this helps.
Click to expand...
Click to collapse
i fail to see how the CID relocked its self... this is unheard of... did you double check the CID unlocking procedure??
Guys,
I had lot of problems upgrading my orbit, first of all i used Pof USPL for making my CID lock phone temporaly unlocked first i got some errors such as PDA and error [270] on the "PDA phone ROM Update Utility" this was easy couse i just disabled the windows firewall an i got it to work. but when i started the black&blue wwe upgrade i got some errors there my phone was low on storage space and when i cleared the storage my phone is stuck on the bootloader meny, i tryed to update with USPL again directly with ROMupdateUtillity not with the USPL_start.exe couse my phone is not loaded to winCE and not active sync, i did this by going to bootloader meny RGB meny and stgarted the o2 german update but i get i message telling me that the phone is wrong model ID error 244
With these problems i concluded that
You have to make sure that you have installed properly USPL
You have to make sure that you have free storage space
You have to make sure that you had disabled windows firewall
Any advice is very usefull to me and the xda-developers community
Kind regards
I also managed to get pof's USPL correctly installed. I then successfully flashed a WM5 HTC ROM just to test it was working. Success. I then flashed a WM6 ROM. Unfortunately I forgot to re-flash with USPL first. Hence I "BRICKED" my phone. A quick trip to my local O2 store, my brick was sent for repair. I have just received it back. Repaired under warranty. "Software Fault". Now I paid imei-check, got it unlocked and have now flashed BEPE's WM6 ROM successfully. So much faster that WM5. Great.
yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
What was the radio version you installed?
Did you try CID unlock?
Cheers
radio version 3.06.90
cid unlock ?
do you mean the armenis uspl?
what is your SPL?
See this:
http://forum.xda-developers.com/showthread.php?t=311403
Cheers
i used that spl version, but after the radio upgrade it doesnt work anymore because the activesync signal is losts.
The message from the upgrade tool:
the rom image is damaged ( but i know its not damaged because i used it a lot)
spl 3.15.0000
ipl 3.15.0001
marcohag said:
yesterday i upgraded my mda compact 3 with the new radio version
Before this upgrade i upgraded my mda with different roms and radios with succes
After the new radio upgrade from t-mobile, is the cid lock back on my mda and i cant upgrade it with new rom versions.
Even the Artemis USPl doesnt work anymore
a T-mobile rom upgrade works
but if i want to upgrade my mda with a different rom, disconnects the mda the usb connection.
i solved my problem
Step 1
remove sim and mem card
step 2
run uspl
step 3
upgrade radio back to old version
step 4
upgrade the rom
Click to expand...
Click to collapse
hey man i do have the same problem i can't also not upgrade/update my mda compact 3 after i wanted to try the new T-mobile software but now i cant do anything i'm from holland and have installed the mda upgrade from tmobile can you explain to me more specified wat you did..?
hoi gasten,
I had the same problem. It helps to get your cards out before beginning, but I used the USPL untill the screen went black and the USB connection failed.
You could see there was power on, only because ther was this glow around the screen. Disconnected the device, took out the battery and started again.
Then I updated the ROM (tom_codon b&b) and it was succesfull.
The radio update (3.21.90) went exactly the same way.
I haven't got any problems since, not even with the dutch T-Mobile network, exept offcourse with activeSTINK.
But even this works fine after switching from USB port.
Good luck
Hi there everyone,
I am writing this from NZ where our internet is still slow haha,
I am looking at getting a hand with unlocking my okta boss (NZ version of the Libra100/HTC s720)
It is still running WM5 and i want to upgrade, I see that HTC has an update out and when i try to run it it comes up with Error 294 invalid vendor ID.
I assume that this is because i need to unlock my phone.
Or is there another way to upgrade my phone to wm6?
any advice would be great,
From Liam