Related
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
zohaer21 said:
i had the same problem... then i came up with a briliant solutiion
you know the user.hv and initdata can be edited without any probs..also this version of the rom deploys the ext rom aswell.. so what i did was i edited config.txt and added a cab with the HKLM etc regs that go into default.hv into the dump folder and generated a rom with that cab inside..
and VOILA... now i have a custom rom with all my settings... i figured this way out after hours of frustratingly trying to edit the default.hv
hope this helps
Click to expand...
Click to collapse
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
dont know if this would help you but take a lot here :
www.asukal.jp/hv_rom/hive2.txt
or simply use Make_HV, found it in the development & hacking thread.
First covert the hv file to rgu (which is simply REGEDIT4 Format) then make changes and convert it back.
qooqoo said:
i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
Click to expand...
Click to collapse
This is my little surprise
qooqoo said:
thank u, i have tried ur solution, but there is a big problem, .cab file doesn't support chinese caracter, so edit default.hv is the only way.
Click to expand...
Click to collapse
You don't need a .cab for this. The program that goes through Config.txt can handle XML files with registry settings directly. So, grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want. If I'm not mistaken, it's even available bundled with a Chinese ROM already. There you can edit the .rgu files from which the Registry will be created. This eliminates the need to read any of the .hv files. Worked very well for me! Also, since bepe's kitchen recreates the packet structure of the ROM, it's so much easier to understand which files and registry entries have a dependency or belong together. Highly recommended!
Cheers
Daniel
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
weird suprise
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
Why would that be a surprise? Is there more to this than meets the eye?
dutty said:
weird suprise
Click to expand...
Click to collapse
Indeed, I've been hitting my head against it for some days now...
lvsw said:
This is my little surprise
Click to expand...
Click to collapse
himan，give us a solution plz, it is a so good rom, but i can't add anything i want.
tadzio said:
grab any of the .xml files listed in Config.txt as a template for your own .xml file. Then just add your new .xml file plus a line in Config.txt referencing this new file, and you're all set.
Click to expand...
Click to collapse
thk u but i don't know how to edit a xml file, any suggestion?
tadzio said:
There's another solution which I found much more convenient: use bepe's Rom Kitchen, and import whatever ROM you want.
Click to expand...
Click to collapse
it is for CHT but not for CHS, there is a lot of CHT roms yet, cooked or offcial, but there isn't a official rom in CHS, a just want to convert 0320 vesion to CHS vesion.
I will be watching this thread.
Waiting for good news.
qooqoo said:
i have cooked successfully more than 10 roms, WWE vesion to CHS vesion, they all work fine.
but when i want to cook a new rom based on LVSW 0320 vesion, i failed. i found that the default.hv can't be transfered to txt file, once i edit this file, os can't boot and stick on the SubSplash screen. but user.hv can do that.
sorry for post this new thread but i have posted under lvsw's thread and no one answer me.
can anyone help me plz, i really like this ROM.
thanks in advance.
Click to expand...
Click to collapse
I have the same problem...the LVSW 0313 version was fine...then the new LVSW 0320 won't boot..stopped at the subsplash screen...it is strange that the default.hv is there but doesn't seem to booting the file.
qooqoo said:
thk u but i don't know how to edit a xml file, any suggestion?
Click to expand...
Click to collapse
Any Unicode-capable editor will do. Personally, I use UltraEdit.
Cheers
Daniel
Please don't take offense, but I'm starting to think you got the ROM as it is..."protected" that's why all the customizations are done via AutoRun.exe and xml files.
i found that lvsw 0325 edition can be edit.
qooqoo said:
i found that lvsw 0325 edition can be edit.
Click to expand...
Click to collapse
Yes, 0320 can't be edited. But 0325 could. But you can't use the regular tools..you have to use the "more Storage" tool, then just manually copy the "default.hv" and "user.hv" from the "dump" folder, use the regular tool and covert it to .reg. Then you make modifications to the registry file, convert it back to .hv and copy them back to the "dump" folder..you can add files by just copying files into the "dump" folder..after you are all done with it, just continue with the "more storage" tool to make your new-os.nb
Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
ok, the utilityes you need are:
*** all utilities are ready to download in the end of this post!!! ***
1) nbhtool_trin.rar
2) package_tool.rar
3) nbdumper.rar
4) bepe_kichen_trinity_ita_WM-6.1.rar
Code:
6.1 bepe_kitchen.rar
5) Flash_nbh.rar (included into kitchen!)
6) rgu to xml transform an rgu or a reg file into a provxml file!!
7) dsm patcher to update also the dsms files to respect the rom's os and build version
1) nbtool from dutty is usefull to decompile/recompile nbh , decompil enbh, choose nbh to decompile, you have 1 or more .nb files, windows.nb is that you need, the rom, you should find also:
radio.nb (radio)
first/second_splash.nb (the 2 images shown as splashscreens!!!)
ipl.nb (boot of trinity...)
spl.nb
and other that now I not remember...
................
to recompile the nbh file, just select that you need (os.nb, first.nb second.nb)
for my experiences, try first times only with os.nb, choose the file and compile the nbh files,your rom is ready to be flashed into device...
2) package tools analize the dumped os windows.nb and tell about sys and oem versions, more it creates packages of dumped rom, and insert all files into the 2 system directory "oem" and "sys" with button (menu) "build packages"
3) nbdumper from tadzio, it is the important tool togheter bepe kichen, with it you are able to dump "windows.nb"
put windows.nb into the folder, dos prompt and write:
nbdump windows.nb (then press enter...)
in few minutes you have inside also the directory named: windows.nb.dump, iside you can find all files that will be in rom on your device...
4) now open package tools by bepe, search this directory, and analize, after analizing, click on build packages...
after some time, you in "windows.nb.dump" directory have: sys and oem folders...
this is the real os...
now you neeedd xip directory...
copy windows.nb into the directory named:XIP_extract (that you can find in "bepe_kichen_trinity_ita" tool...
copy it into the directory, rename from windows.nb into "os.nb"
click on "Make_XIP.bat" and then you have "xip" folder...
copy xip folder into "rom" folder in of "bepe_kichen_trinity_ita", copy os.nb too into "rom" folder, so you have rom folder and inside:xip fiìolder and os.nb...
ok...
now, oem and sys folder obtained with package tools, copy them into "bepe_kichen_trinity_ita" tools, and you have:
oem, sys, tools, xip_extract and rom folders, and the exes...
now is ready...
you have to click on "buildos.exe" and the rom will be build, ok, now there is a new folder, "temp", now you have finished, only click on createrom.bat and in few seconds you can find into \temp\ folder a file named os-new.nb, this is the new rom, build .nbh with dutty nbtools, and can flash it on your device!!!
5) to flash put nbh created into folder:Flash_nbh, flash....
next, tools and howto: create extended_roms;create own splashscreens, adding own packages (the packages are additional programs... into I left yet 3/4 packages from mine!!).....
*******************************************************************
I must make all credits also to udK, that discovered with me the right way to kook roms...
and invite all people to make some dotations to him, for the hard work that he made to have a good italian rom to mount on our devices!!!
thanks friend...
*******************************************************************
I think is better to try with udk or lasagna roms to start, they are perfext and logically structured as bepe kichen wants!!!
bye!!!
****************************************************************************************
*
* P.S.: and finally I think that if you decide to use udk rom to make experiments, you have to donate him,
* and if uou want to use lasagna rom to learn to use bepe kichen, also you have to make donations to guybrush.
* they worked hard to translate the rom, you must donete to use theyr roms I think is the only think to do
* to tell them "thanks!!!", really...
*
****************************************************************************************
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 2:
how make own splashscreen!!!
just open an image or create one, with also paint;
make it 240x320 pixels, 240 in width, 320 in height...
save it as bmp, with 24 bits...
open it with nb_image_converter
convert to "nb"
save it as first and second.nb...
now, if you don't have windows.nb use dutty's nbtools to extract from rom, reuse nbtools to compile nbh, add
in os: windows.nb
in "first splash" the file first.nb
in "second splash" the file second.nb...
compile nbh file and flash into ppc, when you finish, you can see you freferred splash screens!!
next:
create a package and/or translate the exe/mui files in your language with resource hacker!!!
try to open an exe, or first a mui files if there is into the package!!
you can see:
icon (you are able to change it , but is not important for us!!)
dialog, you can move the object inside them, rename or translate strings and other...
string table, here you can change, translate in your language tje strings of mui/exe!!!
and other, but for modify translate this basts!!
see later!!! bye!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 3:
for mui:
if you have traslated them, you have also to rename: exaple, if therer is amui xxx_409.mui, in english of couse, and you stranslated it into italian, you hace also to rename it by xxx_409.mui to xxx_410.mui!!!
and for italians mui you can use the ones from tynh wm6 Italian rom!!!
and also initflashfiles.dat must be traslate...:
and also rgu files:example:
string: "programs" must became "programmi"
string: "my pictures" must became "immagini"
etc.etc.
howto: CREATE A PACKAGE!!!
ok, download theese utility:
wince cab manager from here:
http://www.ocpsoftware.com/
(full funcional trial for 15 days!!!)
and my utility: packages creator (a little tools of mine!! )
from here:
-------------------------------------------------------------------------------
UPPED:
(new version... bugs solved... option improved!!!)
now in bilingual ITA/ENG, and with more option to personalyze your new packages!!
new beta with more and more options to create initflashfiles.txt...
flag:"simulate folder names" on wince cab manager and put reg file into package folder you choice...
example: "...\trypackage\windows\batterystatus\batterystatus.exe"
you have to put reg file into "...\trypackage\to-import.reg" ok???
and here the new beta of package creator!!!
Hi all, from a Bennec83's Idea I released this last version that works with cab analyzer, and make packages from cab files automatically...
*******************************Re-reupped 1st good working release!!! 4.1 *********************
-------------------------------------------------------------------------------
ok!!!!
P.S.: if th bepe kichen shows an error during the kook operation, it will be becouse there is another file (duplicate file) yet present in rom, delete it from other subfolder, not in the package just inserted...
next appointmant to create own extended_rom!!! and some triks on registry (modifing rgu files!!!)
see you!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 4 playing with extended rom:
howto: create and use extended roms...
ok, have to download the utility htc_extended_rom_editor
I think is all.... (for now!!!)
your knowledge about roms, its components, how to dump, build, add packages are full... rests to edit rgu and provxml...
but in next days....
bye bey and good experiments!!!
*********************************************************************************
*********************************** ******************************
*********************************** UPDATES ******************************
new version of buildos+packagetools, some imporvements, and context menu on packages to enable/disable them by default!!
new version of buildos, now:
1) xip porting for os ber updating;
2) updater for Rom Creation Date;
3) Updater for Rom version at Boot screen!!!
enjoy!!!
improved some context menus on selected package.....
xip porting for OS version and Rom's Date creations Updater!!
new version of package creator, to have own directory where place shortcuts, and some minor bugs solved
here: and added links in initflashfiles.txt for .htm files for "Help"!!!
P.S.: I need beta testing for my apps, becouse, I go on programming and there are allwais same bung into...
bye!!! ( a big thanks to guybrush and udk for testing and support, but specially to Vibranze for testing package creator!!!)
*********************************************************************************
Traduzione in italiano della guida del Kitchen
Lavori in corso..
ervius said:
Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
Click to expand...
Click to collapse
thanx, let's start cook togheter
--reserved for packages--
I only hope that my 3d iwill be usefull to be better, and share togheter a lot of packages for our trinity devices!!
see lather...
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
....
3) This is possible some mirror not rapidshare? (for example www.divshare.com)
Grazie mille.
Viva il P3600.
cicciocant said:
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
Grazie mille.
Viva il P3600.
Click to expand...
Click to collapse
1) infinite greetings to bepe for the beautifull tool...
the kichen is the same, only you have os and xip for trinity (after you extrapolated oem-sys folders and xip!!!)
2) you can use all roms you want, also in other languages, but only if they , after you dumped and analyzed with bepe package tools, and have oem and sys folders (and xip folder...), but if you try with roms that have missed files, you must try to insert them into oem or sys dolder, you, after use bepe package tools must see only "oem" and "sys" folder, nothing else, to know that the rom is really ok..., in other case the rom was built in confused mode or with other utilities, that I consider oldier...
bye!!!
and my final point is also share a lot of packages....
for now I think it's all, but in few days I explain also howto build packages and other....
see you!!
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Guybrush said:
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Click to expand...
Click to collapse
yes... by attentions, use the tools at own risk, and specially use them with "brain"!!!
bye!!
Thanks ervius! you are truly "mythical". I`ll read all with much attention tomorrow, now i`m seat in one park bench to 5 meters from the sea.....
Hi...... morf3o.
added lesson 2 (how to create/modify images and create your splashscreens at ppc boot!!!)
at first post!!
see you later to build our first package!!!
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
cicciocant said:
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
Click to expand...
Click to collapse
so, you have to install also java virtual machine... with this utilities in not necessary...
thanks ciccio but i'd like to continue with bepe's kichen, do you like use it??
ok...
3 files are out, put them into \oem\oemapps\ directory, so you now have only oem and sys directory, then... extract xip etc... etc...
ok!!!
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
cicciocant said:
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
Click to expand...
Click to collapse
I don't have your error, but if finally you have oem and sys folders, then it works well...
but you can try to delete and post if it work...
bye!!
Sorry for my newbie question...
In my understanding all this tools are working with ROM files you already found "somewhere".
What I want to do first is getting a working ROM out of a Trinty device. E.g. I have a german Vodafone device with the Vodafone custom ROM. I simply want to "copy" this ROM on my Harddisk. No changes. I only want to be able to flash it back if I want to, to have the device in the same state it is now.
Which tool do I have to use?
What do I have to do?
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
A question ervius:
we suppose that I succeed to modify/create my first ROM, exists a way in order to test it without flash on my device? A way for being sure that if I flash, i do not burn my trinity....
Thanks........ morf3o.
morf3o said:
exists a way in order to test it
Click to expand...
Click to collapse
The only way is flash your trinity and hope
claros said:
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
Click to expand...
Click to collapse
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
saminegm said:
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
Click to expand...
Click to collapse
Your OS is in part2, first two parts are the XIP partition aka your boot sector.
Ciao
Hi all, i have complety translated, .rgu / .dsm / .bmp / dpi 96 to 192 / 0409 to 0406.
from 20924.
But, when i cook it, and flash my phone, it dosen't book. I can see the version, but i can't not come to wm6 startscreen.
Do some1 know what it could be ?
Could some1 please look at my files maybe :/?
http://rapidshare.com/files/161467646/sys.rar
Bump, no one want to look in it and help me ??
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
NotATreoFan said:
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
Click to expand...
Click to collapse
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
danny_and_2 said:
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
Click to expand...
Click to collapse
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
NotATreoFan said:
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
Click to expand...
Click to collapse
Yes they just came automatic, so. Yes i will try that one, will report back if it dosen't
--- Edit ---
I couldn't i get an I/O error 105. ? Some1 knows what this it ?
--
Run-time error 105: File not open for output.
This error occurs if you try to use standard input and output functions
like Readln and Writeln without the Uses WinCRT; statement.
To correct this error, add Uses WinCRT; to your program.
How exactly did you translate the 96.DPI files?
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Noonski said:
How exactly did you translate the 96.DPI files?
Click to expand...
Click to collapse
I have copyed the files from the diamond (192) to it.
Noonski said:
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Click to expand...
Click to collapse
I also would, but it ain't released on danish
Noonski said:
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Click to expand...
Click to collapse
I have copied the danish 0406.mui files, and changed it in every .rgu and .dsm file.
Bump, bump, bump.
Must be some1 out there, there can help me find my mistake ;/
danny_and_2 said:
Must be some1 out there, there can help me find my mistake ;/
Click to expand...
Click to collapse
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
Click to expand...
Click to collapse
Hi there.
Thanks for you guide, I'll try it right away.
And I will say if I run into a problem.
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Click to expand...
Click to collapse
They aren't in my kitchen with this rom. Don't know why.
xboxmod said:
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
Click to expand...
Click to collapse
It boot, and it works. Haven't looked so much on the rom, just verify'ed the xip version.
xboxmod said:
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
Click to expand...
Click to collapse
I have tried what you said, but the mobile just won't boot, and i don't know why ! /:
I think i need some more files?
xboxmod said:
if you have Greloc error replace files mentioned in error
Click to expand...
Click to collapse
I don't have that.
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
TekTonik said:
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
Click to expand...
Click to collapse
Hi there, trust me. I have looked the thread many times ..
Anyway, i got an update.
I have get the phone to boot, with the orginal OS & OSFILES.. Now i just need to find what files i need to have, to get it boot..
But i still got a bug, when it boot, touchflo3d won't start, it just skips. ?
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
ababrekar said:
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Click to expand...
Click to collapse
Hi there.
I finally got it to work (more or less), someone, know the files i have to keep in the shell ?, it wont lunch flo3d. :S ?
Some1 know why ?
ababrekar said:
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
Click to expand...
Click to collapse
But i needed to find out, witch folder there was stopping me from booting, and that was my answer , now i just need to find out what files i have to keep, and there are only 587 files..
I will report back soon
anything new about an issue, I try to port build 20757 from BlackStone and I'm facing the same problem too : replacing SYS only doesn't boot
hi can someone help to finf jump adresses of bintonb0.txt to fill input.txt? i am preparing 12mb pp size rom. when i finish it i will release it.
thanks
View attachment i780bintonb0.zip
I'd made a tool to automate this. Attached here....i think ironeagle is using this to generate input.txt using this for his roms, so should work
cheers
dreamtheater39 said:
I'd made a tool to automate this. Attached here....i think ironeagle is using this to generate input.txt using this for his roms, so should work
cheers
Click to expand...
Click to collapse
woooow thanks bro i will use it now!!
editing registry
hi dreamtheather93;
my 12mb pp size untouched pdxbi1 rom is ready i will upload here soon.however i wanna learn how can i delete unnecesarry programs from rom like cnn or rss reader? how can i delete registry of these programs from rom? and last one, i knwo cab extractor and it produces everything when u extract cab file like nitflashfiles.txt, option.xml, .dsm and .rgu for the kitchen ROM. but how can i add these settings to rom? i know too much questions but i like rom cooking and i wanna learn it
once you've dumped your rom and segregated them into OEM/SYS folders, you'll see most of your packages in your OEM folder, sometimes some cooks put them into SYS folders too!
So, find the proggie, and just get rid of the whole folder with the app.
To edit registry, open the corresponding .rgu file in the folder in notepad and edit it.
I use PackageCreator2.7 by ervius to create packages, pretty nice and simple to use...search for it!
To build the OS/rom, I use PkgToolsBuildOS-5.3
I'm still stuck at a problem myself and i haven't found the time yet to get it working....
good luck m8, looking forward to your roms! cheers
dreamtheater39 said:
once you've dumped your rom and segregated them into OEM/SYS folders, you'll see most of your packages in your OEM folder, sometimes some cooks put them into SYS folders too!
So, find the proggie, and just get rid of the whole folder with the app.
To edit registry, open the corresponding .rgu file in the folder in notepad and edit it.
I use PackageCreator2.7 by ervius to create packages, pretty nice and simple to use...search for it!
To build the OS/rom, I use PkgToolsBuildOS-5.3
I'm still stuck at a problem myself and i haven't found the time yet to get it working....
good luck m8, looking forward to your roms! cheers
Click to expand...
Click to collapse
thanks a lot buddy i will try i hope i will manage to do it.if not at least i try my chance by the way how to segregate the rom into oem/sys? coz when i use efn's kitchen it only dumps the rom.also i tried i900 kitchen and when i segregate the rom i found some dsm. missing files. is these dsm file important?
use PkgToolsBuildOS-5.3 Package_Tools tab to do this...
dreamtheater39 said:
use PkgToolsBuildOS-5.3 Package_Tools tab to do this...
Click to expand...
Click to collapse
thanks a lot ! i am sure that i make u bored coz of my questions well i seaerched google and i found it but all of them has virus.do uhave one without virus?
Hi guys,
I decided to open a blog which explains how to cook roms for the i780. There are very few chefs, and cooking is a really hard science to learn without help! So, I decided that I take the time and write posts so that everyone could learn the process in a methodical manner and cook roms in the future!
I'd slowly write posts explaining each step of the process in detail, so that we can have more people learning how to cook and make the i780 community more happening
Head over to this URL to check out the first few posts -
http://i780romdev.blogspot.com
Update:
Attached core kitchen tools that you'll need to use! Enjoy!
cheers
San
I never was a fan of this forum, not sure why, maybe because I use a ASUS P527 and there are not proper instructions on how to create a custom ROM, I appreciate your taking the initiative
I think its good fun to try and figure out things on your own
Non-HTC devices do have a very small fan base unfortunately....and ironically, HTC makes the crappiest devices imo (highly crash prone, buggy, lousy drivers, useless qualcomm processor)!
You can apply the same tools and techniques even to cook asus roms....its not all that different
cheers
wooooooow thanks a lot buddy finally we have it also !!!
when will u release part 3? and also can u give the links of programs? like pkgtools_? coz i tried to download it from somewhere else and it had virus
benveq said:
when will u release part 3? and also can u give the links of programs? like pkgtools_? coz i tried to download it from somewhere else and it had virus
Click to expand...
Click to collapse
hi m8!
i'll try and upload the set of tools shortly. You can get it in any of the kitchens posted for the i780 here. I'll however consolidate them and add it in this post as an attachment!
Part 3 - very soon
cheers!
You guy thanks for sharing your experience at cook ROMS,I whink I need this for my SmartPhone.
Hey guys, just dropped the next part of the series on the blog. Check out http://i780romdev.blogspot.com
Of course, the same theory, tools and understanding goes to cook for any other device too
cheers
kitchen tools attached in the first post.
enjoy
dreamtheater39 said:
Hey guys, just dropped the next part of the series on the blog. Check out http://i780romdev.blogspot.com
Of course, the same theory, tools and understanding goes to cook for any other device too
cheers
Click to expand...
Click to collapse
yeah, now i am reading part 3 and u really teach very well! i think i will cook my own room soon with ur help i wanna ask a question if i dont want ms office and internet explorer in my rom which folders should i delete? i wanna add different office program
benveq said:
yeah, now i am reading part 3 and u really teach very well! i think i will cook my own room soon with ur help i wanna ask a question if i dont want ms office and internet explorer in my rom which folders should i delete? i wanna add different office program
Click to expand...
Click to collapse
To remove a package, you can get rid of the corresponding folders in your SYS folder. But its not recommended that you knock off office/ie as they might be referenced within other apps. You can always take it off, build a rom and see if everything works fine
For example, to remove IE, just delete your Browsing, Browsing_DPI_xx and Browsing_Lang_XXXX, BROWSINGCORE, browsingie, browsingie_LANG_XXXX folders. That should get rid of IE for you! Then you need to recreate your bin!
cheers
thanks a lot for kitchen tools and ur explanations! i read ur blog all the time great work!!
The next post is up
cheers
dreamtheater39 said:
The next post is up
cheers
Click to expand...
Click to collapse
yes i read it, and u r teaching with examples it is great
i have two problems while i am using ervius pkgtools
1. when i open dumo folder it shows
[Missing Manifests]
(Maybe):\ROM\XIP\45116509-e364-4775-9098-c25f0b1fbac2.dsm
(Maybe):\ROM\XIP\d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
(Maybe):\ROM\XIP\723fb954-d931-4348-b672-82a188e587b5.dsm
(Maybe):\ROM\XIP\1a22bb67-d4c4-7bb4-c5d2-75cb3a85c45b.dsm
(Maybe):\ROM\XIP\449da4ef-e9c1-5cb4-2ec5-fb9b4c27a865.dsm
are these important dsm files?
2. when i press build packages it gives this error:
not found: select .os file to extract XIP
and i extract xip file using osbntool as xip.bin
any solutions for both of these?
benveq said:
i have two problems while i am using ervius pkgtools
1. when i open dumo folder it shows
[Missing Manifests]
(Maybe):\ROM\XIP\45116509-e364-4775-9098-c25f0b1fbac2.dsm
(Maybe):\ROM\XIP\d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
(Maybe):\ROM\XIP\723fb954-d931-4348-b672-82a188e587b5.dsm
(Maybe):\ROM\XIP\1a22bb67-d4c4-7bb4-c5d2-75cb3a85c45b.dsm
(Maybe):\ROM\XIP\449da4ef-e9c1-5cb4-2ec5-fb9b4c27a865.dsm
are these important dsm files?
Click to expand...
Click to collapse
This is not important....ignore them, its normal
benveq said:
2. when i press build packages it gives this error:
not found: select .os file to extract XIP
and i extract xip file using osbntool as xip.bin
any solutions for both of these?
Click to expand...
Click to collapse
When you start, it asks if you would like to run build xip.bat.....just hit NO for that....
trojan reported in the attachment
Win32/TrojanDownloader.Zlob.NBP
false alarm?
well last night i finished my own wm6.1 build 20270 128dpi pdxib1 according to your guide i wanna tell what i did to complete it ;
1.i exctracted my rom using i780 kitchen and i got dump folder and i also added some extra tools like ervius buildos,osnbtool etc...then i used pkgbuildos to seperate folders into oem and sys
2. i used oem part from krizky82's kitchen and i add some extra packages using ervius package creator 2.7 and add them with oem_blahblah to oem folder.
3. i deleted windows live and msn messenger from sys folder and copied netcf 3.5 and flashlite v3.1 from krizky82 kitchen. i also used his initflash and rgu file coz i had same structure almost(oem totally same and sys programs also)
4.i looked at both efn's kitchen and krizky82 kitchen and i saw that they have this structure oem,sys and rom and in rom there is xip folder. when i looked at inside xip folder i saw that there is only coredll.dll folder and others are dsm rgu and boot files so my next step
5. i used osbn tool to exract xip.bin and after i got that xipkitchen_beta6 and i choosed the same donor and original and after extracting i got original xip files and i ordered in same structure like efn's kitchen
6.then i used pgkbuildos and let the process starti had some dsm duplicate errors and i delete duplicated ones and later i didnt start xip extract bat and flashable bin bat so after process again i had temp/dump folder
7. during buildos there wasnt any error and i was happy about it
8. using inputTXTFileMaker ( thanks to u dreamtheather93) i got input text and after that using these commands;
mgfsfromdump imgfs_raw_data.bin new_imgfs.bin
del imgfs_raw_data.bin
ren new_imgfs.bin imgfs_raw_data.bin
make_imgfs i780.nb0.payload.body -nosplit
merge i780.nb0.payload.header i780.nb0.payload.body i780.nb0.payload
nbmerge -data 2048 -extra 8 i780.nb0 -conservative
and conv3 input.txt > conv3_output.txt
ren i780.nb0.b000ff !!i780_flashable_bin.bin
i got my flashable bin file yupiiiii i controlled the size of flashable bin and it is 86.2 mb and the size of dump folder almost 125 mb i hope it is ok
now i will flash my phone but is there any possibility that my phone can be bricked ?
thanks a lot for ur guide again!!!
note: i already used i780.bin as 12mb page pool size i did it before kitchen using osbn tool
good job m8
You cant really brick your i780 because of this I've done way crazier stuff....like trying out omnia's xip, drivers of omnia on i780....and nothing's given way
However, i'm hoping you've ported your XIP accurately, and i'm unsure how've you've built your SYS folder.
but, go ahead and flash and see if it boots nothing to be paranoid if it doesnt boot/hangs at startup/throws an error and fails etc. etc. If any of this happens, then we could troubleshoot it together
cheers & good luck
Great job!
Nice start San!
Not even some days left from your first successful cooking and you already best gid on it!
Keep on do it. And we wait for new mods for our best touchphone!
I think now anyone is able to break Eagles wings =P