Hi there
Is it possible to switch off the blue (BT-)LED? If it is .. how?
LG
S
why you want to switch it off? if i remember vijay555 made some app for controlling leds.
Because i´m using Spb Phone Suite´s automatic-profile-switching-function.
That means the BT is allways on. As soon as my headset is detected, it switchs to the headset-profile.
But while driving don´t like the bright flashing blue LED.
Thats why i want to switch it off.
LG
S
... not found it :-(
Related
Hi..
Is there a way to turn the LED´s off? - i found a program (DonForget) to my Qtek 8500 that made it possible to slow the green LED down to 0=Off. Is there a program like that i can use for my HTC P3300??
MicTh
Hi guys,
is it possible to change the color of the LEDs?
My intention: Normally the LED glows green, when I missed a call or something like that it glows orange and when the accu is nearly empty it glows dark red.
Often I see the green LED in the corner of my eye and think it's orange - although I know that it's not.
So: Is it possible to change the color of the normal alarm LED into dark red? I tried no2chem_nueLED but it doesn't show the dark red LED.. :-/
Thanks in advance!
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
hey,
Yeah I've been trying to figure out if there's a way as well. The same thing happens to me all the time. Whenever I see the green light from the corner of my eye I think it's orange too .
Anyone willing to shed some light on this?
@HungryHippo
The green lights indicate that your phone is currently connected to the Phone Network... it doesn't flash when you're out of ranch.. I don't know how to turn it off other than putting your phone in Flight Mode..
Hi there...
I think this thread is in the wrong place but ill still help
Use a regestry editor to change the leds
Disable flashing service LEDs
[HKLM\Drivers\BuiltIn\AllLEDMgr]
By doing this It WILL dissable the phone from vibrating!
As for changing the LED's colour I dont know how to but I will have a look!
Use the wiki as it is your friend!
How do you get the thing to be ON? The Green light used to be on when on charge......sadly I haven't seen the light ON now for the last 2 weeks despite it being on charge and does charge too?
Do I need to use the same registry hack to get the light to come ON?
HELLLPPPPPPPP
SPV_M3100
PAYS 3.5 ROM
HungryHippo said:
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
Click to expand...
Click to collapse
Weird ... the same thing happens to me, too! I thought it was my aging eyes ... though I KNOW I'm not color-blind. But yes, when seen with only peripheral vision, it often appears to be the amber color. Very strange perceptual event here.
u could try using the nueled software in the dev and hacking forum not sure if it works like it should tried it once but u can always try it
yeh, nueLED has your best options...here's the thread:
http://forum.xda-developers.com/showthread.php?t=371391
The reason your peripheral vision sees a different colour is that the LED isn't actually one LED - it's two. Probably red and yellow. This allows it to display
3 different colours, ie.
R = Red
Y = Yellow
R+Y = Green.
The R+Y is probably created by high-speed alternating between red and yellow. Your peripheral vision detects one colour only, probably because there are far less colour receptors at the side of your visual cortex than near the centre and they only register the one colour. As soon as you look directly at it, more rods/cones come into play and your brain then interprets what it's seeing as the blended colour, green.
The above isn't exactly correct, but it's close enough so you get the idea....
Amber
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
antonof said:
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
Click to expand...
Click to collapse
If you go to settings>sounds¬ifications>notifications>Phone:missed calls
You can change the Flash Light For value to NO LIMIT. Default is 15 mins.
Hope this helps
Dave
Sure it helps.
Thanks a lot.
douginoz said:
The above isn't exactly correct, but it's close enough so you get the idea....
Click to expand...
Click to collapse
Especially since yellow+blue=green.
hmm
yeah... nueLED doesn't work on my hermes. It doesn't give me the address of the red LED...
But the LED light does not light up AT ALL?
Has the LED blown?.....Didn't think thta was possible since its not a Bulb?
I noticed that Signal Reception Led is not blinking .
I can see it working sometime and sometimes not.
It is also same for bluetooth led. When I turn bluetooth on, blue led doesnt blink.
Is this hardware issue or software probkem? Can anyone help?
I dont think it has this function (the last device has this function if i'm not mistaken is htc tytn [hermes] ). Its only for notification like new sms, etc. like circle LED light on touch pro (raphael)
Light only flashes when it's told now. Doesn't flash for reception any more. For the record the TyTNII had it.
Mine flashes when I have a new text message or when GPS is on.
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
thank man. I was worried that there is a problem with my device which I received 3days ago.
neforce said:
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
Click to expand...
Click to collapse
There will be flashing amber light when remaining batt level is below 10%.
yeah, it goes blinking orange-like color. but it would be nice if it blinks red when it is nearly empty...
why does they always reject the good features....
I've searched and can not find an answer/solution.
Does the TP2 ( i own T-Mobile branded ) have the LED status lights for when bluetooth is on (blue led), GPS is on, and WIFI? Also flashing green when radio is connected? Like the Kaiser.
Because the only time I have LED status light on is when I have missed call or sms etc. No blue LED for bluetooth and no yellow for wifi or GPS.
Thanks for the help.
PS my phone is HSPL
From what I can tell, the only time the LED will flash is if you have any type of notification/reminder. So yeah, no LED for wifi, bluetooth, connection to carrier.
Thanks for the quick reply. Was thinking of RMAing it rofl.
Can someone else also confirm this please. Just want to be sure.
Okay so no flashing green connection to carrier LED or flashing blue bluetooth status LED and no GPS/WIFI status LED <--(was yellow on some other HTC phones)?
Just want to be sure my device is working as it should be
It is working like it should be... In this case
Sorry to dig this thread out again, but I figured it would not make sense to start a new thread for this.
I would like to change the behaviour of my Status LED on my TP2. There has been an Application to control the status LEDs for the Kaiser. So my question is: Is there also an App for the TP2?
Thanks,
Don
First of all. I would like to know, if the LED light can change to different colors other than the Green, orange(?), and red?
If so, is there anyway that I can tweak the led light on the top of the rhodium to turn a certain color when we have a notification waiting? (New Email, Text message, ect.)
i guess the hardware device can't support ....
afaik the LED under that is a standard 3 pin Green/Red LED. The orange is created by combining the two. So no there aren't really any other colour options. Aside from maybe getting greener or redder shades of orange.
There was a great app written for the Kaiser called Kaiser notification that allowed you to change the color of the led for different notifications. I think this is what you are asking about is it not?
I'd love to know how to change the colors for particular notifications!
I'd love to know if there is anyway to DISABLE the green blinking that goes on and on indicating reception.
There was superb app for my old Titan from no2chem... anything similar for our TP2's?
rajuabju said:
I'd love to know if there is anyway to DISABLE the green blinking that goes on and on indicating reception.
There was superb app for my old Titan from no2chem... anything similar for our TP2's?
Click to expand...
Click to collapse
Interesting, my Tilt 2 does NOT blink for reception, bluetooth, or GPS, unlike the original Tilt which blinked incessantly without KaiserNotification set up.
Maybe ROM differences?