please help..
my email button doesnt work..
i cannot do a hard reset after flashing new rom..
r
I know that tweaks2k2 .NET has an option to hard reset the device through software. You can run it a few time before having to register it. Try loading it and hard reseting your PDA.
i had the same problem
i managed to fix my mail button by pressing it hard serveral times. just give it a try..
Related
Upgraded to Black 2.5 and all working perfect but unable to hard reset anymore, everytime does soft reset instead. Any idea why
HAve you tried to power off, holding the power button for longer, then should be back to normal.
Although I find on mine with 2.5 I have to hold the buttons for longer.
Yes tried several times but no luck, everytime does soft reset.
try to go to setting/systems and use Clear storage then input 1234, work everytime for me
darkgemini, many thanks for advise it's working
no problem, we all here to help each other
good morning to everyone...
i write from italy..
i've installed a utility on my JAq3 and now it wont load.....
it is freezed on i-mate screen and doesn.t move.....
what can i do?
can i hard reset it?
please answer me...i'm without phone and i need it for working...
thank you in advance..
bye
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.
Worked like a charm
Thanks tomtom!
How to hard reset i-mate JAQ3?
How to hard reset my i-mate JAQ3 ?
which is send button?
which is soft keys?
pls help !!!
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks
hello to you all all the member here
i buy htc touch pro2 from us 2 weeks ago,and i install hebrew program into it.
after i install it, it ask me to make soft reset then i did it and after that all i see it black screen with the word HTC on it.
its all i can see now. i was trying to make again soft reset maybe it help but nothing is moving there.
i was trying to make hard reset by presing there and all i see is 4 COLORS AND IT SAID DOWN THERE THE WORD SERIAL and there it stop.as i can know it must move to another screen to ask me if i want to delet and then press volum up then he make the hard reset but he stuck on the screen where is the 4 color.
i realy dont know what to do now.
please, if some one know what to do please help me with it.i realy love this htc pro2.its realy beautiful.
its my first time sending here anything and asking for help.
please help me !!!!!
yours
read the wiki
all that info is in the wiki, but here goes; with the phone OFF press and hold the send and end buttons then press the power button. follow on screen instructions
i just want to make sure you get what i ask
hello members all
i know the things about hard reset, im asking about what i have now in my htc.why i cant do hard reset?
for now i see in my phone the word HTC ON BLACK SCREEN.
i press to make hard reset but not responding anything.
even i cant connect to pc with the phone.
when i make soft reset i see same word again HTC.
ALL THAT HAPPEN WHEN I INSTALL THE HEBREW FILE THAT CALL PARAGON.
so what shell i do next ?
i cant put new rom , i cant make hard reset, i cant connect to pc.
and i have this phone only for 2 weeks.
all i see lots of people here same problem with TP2 to make hard reset.
is that the problem with that htc or what ?
yours
prince !!!!!!!!
1. While the HTC Touch Pro 2 is off, press and hold Talk/Send, End and Power until you see a message on the screen about deleting all data.
2. Release the buttons after the message appears.
3. Press the Volume Up button.
soft reset your phone, then turn it off and try hard reseting again
Remove the battery first to power it off (if that wasn't clear), then replace the battery and hold in send/end while pressing the power button.
Hi all, I'm not an Xperia user, but Nexus, so sorry if I'm not knowing basic know-how for this device! My father I font now how inserted a pw in the device and now is not able to use the phone anymore... And the problem is mine!
I wanted to factory reset but all try I did were not sucessfull:
1) pw button+vol up not working
2) hw reset button 5sec not working
3) secret dial code not working
What else I can try before connect the phone to pc and try to reset with it? I don't want to read all the instruction for it, I don't know from where start because I'm totally new for this device...
Thanks for your help
Not sure if I remember that correctly, but there's a tiny red button next to the SIM card that should do a factory reset when pressed for more than five seconds.
Already tryied, but nothing, it just shut down the phone
Flash a stock ftf.