Develop Bugs

My Qtek 9000 died after upgrade

Hi to all. After that i have upgraded my Qtek 9000 Vodafone with NoID software, at 99% the device it is blocked. No Boot Display. No Lamp.
I can to solve the problem? How i can enter in boot loader mode forced?
Pse help me!
Thanks.

Power + Light + Reset

rikram said:
Power + Light + Reset
Click to expand...
Click to collapse
Died.
Boot rom is cancelled from PDA?
There is a another mode ?

Help Me!
Help me!
Another Idea?

Power+light+reset = bootloader mode as already posted. It does not light up though, you can only see the bootloader screen if you look at it in bright sunlight or shine a light at it. Try charging it overnight the press power+light+reset, connect it to your PC then run the upgrade. If it really isn't going into bootloader mode then you will probably need to send it off for repair to vodafone.

i just had exactly the same problem, even the pc does not recognize it at all, activesync doent work, what to do please

lion2000 said:
i just had exactly the same problem, even the pc does not recognize it at all, activesync doent work, what to do please
Click to expand...
Click to collapse
I do not have hopes. There is not image on display. I have tried with power+reset+lamp hard reset - + - + Reset!!! Power+ camera + Reset!!!
Display black and nobody written of the boot loader.
Useless if the boot loader it is cancelled is not restorable. Unfortunately it goes in repair.

i have the same problem with my MDA PRO. my MDA PRO also does not show bootloader screen. even not is charging by its charger. i just wanted to upgrede it with AKU and after i upgraded it, it did not open even bootloader screen did not appear.

fuhayer said:
i have the same problem with my MDA PRO. my MDA PRO also does not show bootloader screen. even not is charging by its charger. i just wanted to upgrede it with AKU and after i upgraded it, it did not open even bootloader screen did not appear.
Click to expand...
Click to collapse
I have not solved. I sent device to assistance.

mne now shows the boot screen, it comes with some funny colours, but it stays there, whe i ckicj sof+soft:reset it comes with screen
press o to restorefactory default
press x to exec
when i press 0 it goes back to that funny colourd screen, dont no what to do
any help?

what is soft+soft ? how did you get boot screen ? which phone are you using ?

How it can happen? If device worked before u start upgrading maybe u battery is low. Try to charge it somehow even not fully and continue upgrading via bootloader screen.

yes, universal. good news, i got it back to life, it now an i mate, can't change it, but it works.
i tried many rom version that i downloaded from buzzdev and one clicked.
most came with country id wrong etc
how can i gdt it back to O2? it does not accept it anymore?

tabasco said:
How it can happen? If device worked before u start upgrading maybe u battery is low. Try to charge it somehow even not fully and continue upgrading via bootloader screen.
Click to expand...
Click to collapse
Shalom tabasco, well not really, i had it like that for a week, i evenhad it on charge for almost 3 days, the screen came at one point when i upgraded a rom, but the screen had a funy colour and it was stuck in bootloader, done all reset you can imagin, i even rand O2 to collect it for repair

seems to me that I created a problem for myself too. Can't escape bootloader mode. This 3 stages runs fine, but after final 100% CE screen, when I doing hard reset, writes "Clearing now" and goes back to bootloader screen :roll: How to make him alive? I even did short on backup battery (opened back cover), but nothing effective
ok ok i pressed several times buttons which activates bootloader and it comes to normal activity. Was it a joke or something else ?

Good for you

Did u try to do as given here? http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen - do all this, maybe it will solve. Be ezrat ashem
But anyway I'll going to make him swallow this new ROM from T-Mobile, but later, not at work... :wink:

hi,
did you solve your problem yet ?

Help me!! My Desire fastboot mode fail!!

Hi everyone. My language is bad i'm so sorry.
My Desire is not hboot or fastboot mode when i press vol down + power it's only black screen
anyone help me
thank a lot.

yochitaro said:
Hi everyone. My language is bad i'm so sorry.
My Desire is not hboot or fastboot mode when i press vol down + power it's only black screen
anyone help me
thank a lot.
Click to expand...
Click to collapse
Hi,
try to use adb commands to enter recovery mode

mivza said:
Hi,
try to use adb commands to enter recovery mode
Click to expand...
Click to collapse
I tried it. but commands is show device not found!!

yochitaro said:
Hi everyone. My language is bad i'm so sorry.
My Desire is not hboot or fastboot mode when i press vol down + power it's only black screen
anyone help me
thank a lot.
Click to expand...
Click to collapse
Hi,
revolutionary.io will solve your problem.
Good luck.

iyigit said:
Hi,
revolutionary.io will solve your problem.
Good luck.
Click to expand...
Click to collapse
what how i do? tell me please

I have the same problem.
I flashed HBOOT (cm7r2), reboot phone and phone died.
Now the phone is not turned on.
If you remove the battery and connect the charger, then the LED flashes green / orange color all a time.
If you connect the charger when inserting the battery, the LED will light green.
Then try to turn on phone, it will be just a black screen only.
If try turn on phone VolDown+PowerButton, then black screen too.

Turn off your phone and Press and hold back + power button and this will go to bootloader. Then fastboot. Is it working that way?

Camogyp said:
I have the same problem.
I flashed HBOOT (cm7r2), reboot phone and phone died.
Now the phone is not turned on.
If you remove the battery and connect the charger, then the LED flashes green / orange color all a time.
If you connect the charger when inserting the battery, the LED will light green.
Then try to turn on phone, it will be just a black screen only.
If try turn on phone VolDown+PowerButton, then black screen too.
Click to expand...
Click to collapse
yes!! yes!!! same me too!!

twisted_forever said:
Turn off your phone and Press and hold back + power button and this will go to bootloader. Then fastboot. Is it working that way?
Click to expand...
Click to collapse
No, it does not work.
Bootloader is broken completely.
How i repair it over USB, but I have no box (OCTOPUS, Medusa, RIFF or other)?

anyone have any way?

Anybody can tell whether there is for this phone JTAG over USB without solder testpoint ?
There are free programs to flash bootloader?
UPD: Solved with RIFF box.

[Q] Xperia S bricked ?

I was installing cyanogen mod 10 via CWM and everything went fine until I rebooted after installing. The phone would not reboot in to android.
The phone is stuck on a black screen with no power light showing - it vibrates if I try a hard reboot but that is the limit of what it's doing. When it was plugged in via USB the computer installed a couple of drivers but that's it as far as any form of life goes.
Does anyone have any ideas ?

Is your bootloader unlocked?
CM10 only works on unlocked bootloader.
If your bootloader is locked, use PCC or Update Service to repair your phone.

ss002d6252 said:
I was installing cyanogen mod 10 via CWM and everything went fine until I rebooted after installing. The phone would not reboot in to android.
The phone is stuck on a black screen with no power light showing - it vibrates if I try a hard reboot but that is the limit of what it's doing. When it was plugged in via USB the computer installed a couple of drivers but that's it as far as any form of life goes.
Does anyone have any ideas ?
Click to expand...
Click to collapse
Do this -
1. Download stock ics ftf and prepare to flash it using Flashtool by androxyde
2. Press and hold the power and volume up combination until you get 3 vibrations
3. Now holding the volume down key, attach the usb cable and allow the flashing to get completed
4. Turn on your phone normally after the flashing and enjoy

Thanks.
I used the sony update service to get up and running again. As far as I was aware the bootloader was unlocked but presumably it was not which caused the problems ?

ss002d6252 said:
Thanks.
I used the sony update service to get up and running again. As far as I was aware the bootloader was unlocked but presumably it was not which caused the problems ?
Click to expand...
Click to collapse
It happened because you have not unlocked your boot loader properly.
Sent from my Xperia S using xda app-developers app

abcdjdj said:
It happened because you have not unlocked your boot loader properly.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
So how to fix that? IT seems that I have do the same, and now im stuck at bootloop. Cant even turn it off permanently.

Boshe said:
So how to fix that? IT seems that I have do the same, and now im stuck at bootloop. Cant even turn it off permanently.
Click to expand...
Click to collapse
To turn it off completely, press and hold the volume up + power combination until you get 3 vibrations. At this point, your device will be completely turned off. Now in order to unlock your bootloader, kindly follow this guide - http://unlockbootloader.sonymobile.com/instructions
Good luck

abcdjdj said:
To turn it off completely, press and hold the volume up + power combination until you get 3 vibrations. At this point, your device will be completely turned off. Now in order to unlock your bootloader, kindly follow this guide - http://unlockbootloader.sonymobile.com/instructions
Good luck
Click to expand...
Click to collapse
Thanks for the answer. Already find that and solve my problem.

xperia s totally bricked don't know what to do?
:crying::crying: i accidentally flashed cwm touch 6.0.4 touch and now it is bricked .....when i left it for charging the red light appears but as i unplug it red light go away. dont know what to do plz help....phone not detected by flash tool or emma or pc companion.

iknoxforu said:
:crying::crying: i accidentally flashed cwm touch 6.0.4 touch and now it is bricked .....when i left it for charging the red light appears but as i unplug it red light go away. dont know what to do plz help....phone not detected by flash tool or emma or pc companion.
Click to expand...
Click to collapse
Try the rubber band method from here.

Mirhawk said:
Try the rubber band method from here.
Click to expand...
Click to collapse
tried it kept it like this overnight but nothing happens

iknoxforu said:
tried it kept it like this overnight but nothing happens
Click to expand...
Click to collapse
It sometimes takes longer time to work. Did You get any sort of error on flashtool? Like error while flashing loader.sin? Also, does the phone get warm on the back side?

Mirhawk said:
It sometimes takes longer time to work. Did You get any sort of error on flashtool? Like error while flashing loader.sin? Also, does the phone get warm on the back side?
Click to expand...
Click to collapse
no error the phone is not booting to flashmode at all. neither it getting warm.

M8 won't turn on, only shows red notification light

I tried to flash the new firmware necessary to flash the 5.0 GPE rom but found that my phone had no OS after that. So I tried to flash PhilZ recovery so that I could load a ROM but after I completed that, the M8 is basically dead. The screen won't turn on and the notification light is red. No matter what buttons I press, power+volup, voldown or both, the red light just turns off for a second and then turns on again. The screen won't turn on at all. It's not a battery issue as I had close to 80%. I'm sure I've bricked it somehow but is there a way to fix it? Please help.

Shadester9 said:
I tried to flash the new firmware necessary to flash the 5.0 GPE rom but found that my phone had no OS after that. So I tried to flash PhilZ recovery so that I could load a ROM but after I completed that, the M8 is basically dead. The screen won't turn on and the notification light is red. No matter what buttons I press, power+volup, voldown or both, the red light just turns off for a second and then turns on again. The screen won't turn on at all. It's not a battery issue as I had close to 80%. I'm sure I've bricked it somehow but is there a way to fix it? Please help.
Click to expand...
Click to collapse
does the PC recognize the phone, do you get any usb notification sound ?
does the pc load a driver when plugged in ?
what firmware were you on and what firmware did you flash ?

Shadester9 said:
I tried to flash the new firmware necessary to flash the 5.0 GPE rom but found that my phone had no OS after that. So I tried to flash PhilZ recovery so that I could load a ROM but after I completed that, the M8 is basically dead. The screen won't turn on and the notification light is red. No matter what buttons I press, power+volup, voldown or both, the red light just turns off for a second and then turns on again. The screen won't turn on at all. It's not a battery issue as I had close to 80%. I'm sure I've bricked it somehow but is there a way to fix it? Please help.
Click to expand...
Click to collapse
If a computer cant recognize its a definate hard brick and even if it does it might still be a hardbrick

clsA said:
does the PC recognize the phone, do you get any usb notification sound ?
does the pc load a driver when plugged in ?
what firmware were you on and what firmware did you flash ?
Click to expand...
Click to collapse
If you answer these, we can try to help you further :good:

charge it for 15mints and see the noti light turns on or not and if the pc doesn't recognize after installing drivers then its hard bricked , what did u did with the phone?

I don't know what the issue was but I kept repeating vol up+power reboots until it turned on. Was able to flash the ROM through adb sideload.

Need help plz !!!

Hi frnds.
I have a Samsung galaxy j2 (sm-j200g)
I unlocked bootloader and installed twrp.
But I can't slide the twrp button due to screen issues so twrp is useless in current situation.
Currently the phone has no system OS and I want to restore the stock firmware.
But I'm unable to boot into Download mode (it just boot by luck in rare situation).
The phone is not even charging correctly now. It shows the battery icon for 2-3 seconds and then screen disappears. The same happens when it accidentally boot in download mode.

The battery icon doesn't even show any color.
The phone turn on but only for a few seconds.
Help plz.. Thanks.

Soul.land said:
The battery icon doesn't even show any color.
The phone turn on but only for a few seconds.
Help plz.. Thanks.
Click to expand...
Click to collapse
you can use 3 buttons: volume down+ home + power to go to odin mode
then use odin to flash