Develop Bugs

qtek 9090 wm5 the problem

Hello,
I'have a great problem with my qtek 9090...
Now i'have wm5 on my qtek 9090 but it's very slow!!
I want go back, i want install windows mobile 2003 on my qtek... but... I'can't!
I'have "country id error" or "checksum error" or other...
Sorry but i'm newbie of ppc...
Help me!
ITALIANO
Ho un grosso problema con il mio qtek 9090 , ho installato il wm5 sopra ma va lentissimo! Quindi ci voglio rimeterre il wm 2003 ma non ci riesco! mi da sempre "country id error" o "checksum error" etc...
Ho letto parecchie discussioni in merito ed ho cercato di adottarne le soluzionima niente qualsiasi cosa faccia e qualsiasi cosa ci voglia mettere se ne esce sempre con questi errori...
aiutatemi... ho un ppc solo da un paio di giorni :'(

Updating Problems

Hi Guys,
I have this problem:
My bootloader of HTC P3600 ITA with latest WM5 ROM is:
TRIN100 IPL-5.50
TRIN100 SPL-1.07.0000
the radio hardly attach the line... it is always in searching.
sometime with some reset it goes.
I've tried to update the RADIO ROM but at 7% it always says that the image is corrupted (i have downloaded 5 times ad have the same problem)
so i would like to try with the Dopod ROM so i have to flash the HARD SPL Oli but this also says me that the image is corrupted and to check the update utility.
how i can solve? pls help me!

I have solved the problem of image corrupted and tried to flash my wm5 ROM with the RADIO updated versione 1.46.00.11...
at the end i had a "command line time out" error and i had to reset the device.
no update written.
is like i can't overwrite the radion ROM.... can someone help me?
Thanks

You have need of this program.

Si infatti grazie! l'avevo trovato facendo ricerche.
Dunque il mio problema è questo:
Dove abito prende solo in UMTS (niente GSM) ed il mio 3600 non aggancia proprio la rete con la TIM (con 3G e Vodafone va benissimo).
Andondo circa 300 metri pi lontano del mio palazzo inizia a prendere benissimo e funzia alla grande!!!!
inizio a chiedermi se è TIM che ha problemi con i ripetitori UMTS (visti gli ultimi continui blackout magari qualcuno si è "fulminato")
cmq volevo provare a mettere su la ROM data in dotazione da TIM (magari ha qualche ottimizzazione particolare)
cmq ho su la RADIO 1.46.00.11 che dici va bene o torno alla 38?
Grazie sei uno dei pochi che mi ha risposto.
BYe

this roms restore trinity for warranty (ITA)

to restore your trinity to factory default and validate warranty download and flash this rom thi is a italian roms!!!
http://rapidshare.com/files/65452211/trinity_tutto_originale__.rar.html
this roms restore all original WM5 ipl,spl and radio, this rom remove also olipro 1.20 1.30 ecc. good for send trinity to repair on warranty
install this rom only when you are in WM5\6, do not install directly from bootloader or olipro dont delete for protection write
INSTALL:
when you are in wm5\6 run the upgrade, trinity reboot and go in multicolor screen with sign 1.07, if you get an error, no reset but only run again file upgrade
work also from SD..if you flash from SD lunch file enterbootloader.exe before lunch the file upgrade
ITA
questa e' la roms htc WM5 italiana originale HTC ma modificata per ripristinare il trinity con i settaggi di fabbrica, come appena comprato, e' utile nel caso avete installato roms,spl o ipl non ufficiali e nel caso non riuscite a togliere olipro o altri problemi simili
http://rapidshare.com/files/65452211/trinity_tutto_originale__.rar.html
questa roms ripristina WM5 radio ipl e spl originali, inoltre tale roms toglie olipro ripristinando l'originale
installate questa roms direttamente da wm5\6 e non direttamente da bootloader...altrimenti tutto torna originale ma olipro rimane a causa della protezione sovrascrittura
ISTRUZIONI
quando siete in wm5\6 lanciate il file di upgrade rispondete si all'eventuale domanda sulla sicurezza, il trinity si riavvia e vi troverete nella schermata multicolore targata 1.07 se ottenete un errore senza toccar nulla date ok e rilanciate semplicemente il file e l'upgrade continuera normalmente
funziona anche da SD...se aggiornate da SD lanciate prima il file enterbootloader.exe e poi il file di aggiornamento

hi...
wich is the factory ipl number? and the spl number?
i've istalled some udk's rom.. and now i've to restore my p3600 to the original.. where i've to look to found some information about ipl and spl numbers?
thanks
ps: i can't download your rom because i've some problems whit my internet connection, so i want to understand if i can use the original HTC rom that i've downloaded in the past
ciao, quali sono le versioni di ipl o spl originali? io ho installato le rom di udk ma ora per problemi dovrei ripristinare l'originale htc..
puoi spiegarmi come faccio a vedere quali dovrebbero essere i muneri ipl e spl
grazie
PS: ho problemi con la connesione internet e non posso scaricare la tua rom,, quindi devo capire se la rom che ho scaricato dal sito della htc in passato puo bastare..
grazie

alied said:
hi...
wich is the factory ipl number? and the spl number?
i've istalled some udk's rom.. and now i've to restore my p3600 to the original.. where i've to look to found some information about ipl and spl numbers?
thanks
ps: i can't download your rom because i've some problems whit my internet connection, so i want to understand if i can use the original HTC rom that i've downloaded in the past
ciao, quali sono le versioni di ipl o spl originali? io ho installato le rom di udk ma ora per problemi dovrei ripristinare l'originale htc..
puoi spiegarmi come faccio a vedere quali dovrebbero essere i muneri ipl e spl
grazie
PS: ho problemi con la connesione internet e non posso scaricare la tua rom,, quindi devo capire se la rom che ho scaricato dal sito della htc in passato puo bastare..
grazie
Click to expand...
Click to collapse
non vorrei sbagliare xke ora non monto la roms originale ovviamente e non ricordo perfettamente...percio dico che...IPL sicuro e' lo 0.50, SPL se non sbaglio 1.07 ma di questo non ricordo bene...se hai occasione scarica la roms sopra citata e non hai problemi
now i dont mount official roms and i no remeber perfectly but i'm sur ipl is 0.50 spl i think is 1.07

now on my device i've ipl 0.50 and spl 1.07.0000...
is possible that i've installed one unofficial rom whitout modifing the ipl adn spl numbers? if it is possible, i've no problem whit reistalling the official HTC WM5 rom... someone could help me... tanks

alied said:
now on my device i've ipl 0.50 and spl 1.07.0000...
is possible that i've installed one unofficial rom whitout modifing the ipl adn spl numbers? if it is possible, i've no problem whit reistalling the official HTC WM5 rom... someone could help me... tanks
Click to expand...
Click to collapse
yes, is possible, if you have that ipl and spl, no problem for downgrade to original roms

brain_81 said:
yes, is possible, if you have that ipl and spl, no problem for downgrade to original roms
Click to expand...
Click to collapse
thank you soooo much... i've a little problem on mi device and i've to send it to htc.. and now.. i'm starting the downgrade of my device.. it will be for a little time... official again...

I hope sincerely this is my solution i've installed a bad rom and i cannot restore my trinity , how i know when the flashing is finished ?

Help , mi p3600 tell That Romupdateutility is'nt pocket pc valid apllication ! i'm afraid my trinity is only 7days old and i can't use it

freespirit64 said:
Help , mi p3600 tell That Romupdateutility is'nt pocket pc valid apllication ! i'm afraid my trinity is only 7days old and i can't use it
Click to expand...
Click to collapse
i don't understand...simply lunch ROMUpdateUtility.exe from pc...what is the problem? you can try to flash from SD, write also in italian if you are italian in this mode i understand
non ho capito, devi solo lanciare ROMUpdateUtility.exe da PC, quale e' il problema? puoi provare a flashare da SD, se sei italiano scrivi anche in italiano cosi capisco meglio

My ROM is damaged i thing, activesinc not start in my trinity and i can't restore old rom

freespirit64 said:
My ROM is damaged i thing, activesinc not start in my trinity and i can't restore old rom
Click to expand...
Click to collapse
go in bootloader (camera+power and softreset) and see if you are in serial or in USB, if you are in USB you can install roms from PC otherwise flash from SD see here
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing

Hi, i've some problem to restore. This rom on my trinity restore all except IPL.
I've tried by ActiveSync and SD.

All right, with another Romupdateutility i've changed so IPL:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
It's ok for warranty?

tytn blocked!please read!!!

hi to every one friends, i'm italian, i have flashed from 3,54b to 4,22 shaps, but the tytn seems to be very slow, seems to blocks.
The real problem is that when tytn asks to make align of the screen, i make it...but the pda is blocked on the alignement, don't go on the next step...please help me!! i'm italian and speak little english....please answer.
i paid 300 euros!!!
spl 2.10
i also return on the 3.54 but the problems is the same!! on the alignement blocks!

please help me

james82 said:
hi to every one friends, i'm italian, i have flashed from 3,54b to 4,22 shaps, but the tytn seems to be very slow, seems to blocks.
The real problem is that when tytn asks to make align of the screen, i make it...but the pda is blocked on the alignement, don't go on the next step...please help me!! i'm italian and speak little english....please answer.
i paid 300 euros!!!
spl 2.10
i also return on the 3.54 but the problems is the same!! on the alignement blocks!
Click to expand...
Click to collapse
Hi, you can start from here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
And search for bad blocks. Maybe a problem with the radio firmware.
Use mtty and check it.
Bye

i can't know the use of mtty, how does it can be used>?
thanks to all

can i attach images? how can i do that?

Ciao! Ti stanno dicendo che provando con quella procedura potresti isolare il problema...
Se ti va in boot (non se da quel punto può partire ugualmente la procedura....) puoi riflasharlo con la versione che avevi prima...oppure provare a cambiare radio.
Avevi messo l'HardSPL V7?
Hi, i dont know if you can try to flash again...

and probably just a plain Hard Reset can solve a problem.

questa finestra appare e scompare ed è tutto bloccato...il touch nn risponde

i put the screenshot, the window is blocked the touch not respond, i tried to make the reflash, nothing, the hard reset nothing....please help

Nothing HR? (hard reset non softreset...)
Nothing Reflash?! Which firmware?
Which bootloader? Do you have HARD SPLV7?
azzz...Si sarà rotto...Il fatto che carica un po tutto e arriva li, nel punto dello screenshot, mi fa pensare ad un problema del firmware, in qualche modo corrotto...
No panic...

Great...good job, man...
bel testa di minchia questo eh?!
Try Google to translate
http://www.google.com/language_tools?hl=en

i have flashed also with the TNT but nothing, it seems to be blocked, the windows start and close itself immediately....i have flashed the hard7 when i bought the pda...i'm desperate!!!
i don't know what to do...there are 1000 users connected ever on this site, it is possible that no one can help me...

Ok, 1000....ma se ti stanno prendendo per il culo...simpatici.
Ad ogni modo io non sarò un mostro ma qui c'è poco da fare...il problema è il firmware, mi pare chiaro....Prova a mettere la ufficiale con Custom_Ruu
English version: reflash
Ehi Tyman07: try the HerryPotter's wand inside your....ehm...sorry

scusa zorrykid tell me your msn please, sn distrutto!!!

i have flashed the original flash, the flash is all good, pda starts but then it blocks, windows open and close automatically, the same problem, soft reset but the problem come again, please help me friends...please i'm desperate
i have also problem by tapping on the touch screen....don't responde sometimes....you think that can be an hardware problem?
thanks to all user who can help me

help please, zorry kid ma perche' non mi risp in pm>???

Looks like your touch screen is broken. Clean it at the top-right, maybe something stuck there? Then, flash everything official back and go to the repair center.

aiuto errore 262

ciao a tutti, innanzitutto complimenti per il vosto lavoro... però ora mi serve un aiuto.. non riesco a installare nessuna rom, avevo gia fleshiato una volta, ora monto la rom originale 2.03 con olinex 1.40 ma non riesco ad installare cmq nussun'altra rom.. connetto il pda, (DIAMOND) avvio Unsigned-Hard-SPL-Diamond-OliNex, arrivo alla schermata update e poi mi diventa lo schermo del tel tutto nero, activesinc si sconnette, la barra del pc rimane sempre a 0 e dopo un po di minuti mi da errore262... aiutatemi... anticipatamente grazie a tutti...

Google Translation​" hello to all, first of all congratulations for the work vosto ... But now I need a help .. I can not install any rom, I had already flesh once, now monto la rom original olinex 1:40 to 2:03 but I can not install none rom cmq .. I connect the pda, (DIAMOND) start Unsigned-Hard-SPL-Diamond-OliNex, arrival to the screen update and then I become the screen of the phone all black, activesinc it disconnects, the bar of the pc is always a 0 and after some of I errore262 minutes from ... help me ... thanks in advance to all ..."
Maybe someone wanna take a crack at this.​

hello and thanks for the help imatrix, I have done everything as the guide with matty but then I have the same problem ... 262 error .. instead if reinstalling the rom olinex 1:40 I upgrade succeeded. but equally I can not change a rom

which cooked have u tried to install?
how did you install it? via ActiveSync or Internal Method?

I tried to install any rom and I tried to install only with active sync, the other does not know