Automatic time and/or time zone update - MDA III, XDA III, PDA2k, 9090 General

Is there any way to get WM2003 to update the time and preferably the time zone automatically? My last Motorola phone did this automatically and flawlessly. I would assume it accomplished this via GPRS (or possibly GPS). Seems like it should be a relatively simple little app.

Actually, I would assume it did it via the carrier signal. Each telco encodes certain information into the "Base" of the signal (such as the network id, the cell id of the current cell and the date and time). Most phone's can be set to automatically update their internal clock and keep it in synch with the carrier signal date and time.
That's the first time I've heard of a phone that switches it's timezone though. Very clever. Must be possible to write an app that does it for PPC. Anyone?

Clarification
Small calrification: My last phone did not have a concept of time zone, however it did set the time properly.

Related

Automated Data Connection choose with user defined behaviour

Dear all,
since one week I have the TP2 and like it a lot. Until the TP2 I used to have an Iphone3G and now of course I have to change my user behaviour a little bit.
There is one big topic I would like to discuss here: DataConnections!
I have the problem, that I dont have a flat option for data from my provider. I have to pay by time and not by traffic. Hence I like to keep the time I am connected to the Net to a minimum!
Is it possible to realise the following with the TP2 (maybe with extra software)?
1. Mobile data connection only manually with immediate cut off after the transfer (for example if I press send/receive for mail). If I want to manually access the net there should be a short message box asking me to connect. Currently I have to use the CommCenter to switch data connection on/off. As I already use nodata to really cut off the automated connection behaviour, maybe this tool can also be used somehow to allow access and cut it off after the sending/receiving is done.
2. Wifi Scan constantly in the background (after manually switching it on) to scan for open networks or prefered networks. If some network is found, it automatically connects, checks internet, do all the other automated updates and stays connected until I manually disable wifi.
As you can see, I want to have some kind of automated, cost efficient, connection behaviour of TP2. The tool nodata, which I currently use is great to cut off the automated connection but is not very flexible
I am looking forward to exchange with you on that topic.
Regards,
dvdjimmy
...does really nobody else need something like this? Or am I just too stupid to use the onboard tools of wm6.1 correctly?
Regards,
dvdjimmy
take a look at bandswitch or commmgrpro...
you can use this registry entry,
for example this will kill automatic the connection after 10 seconds,
or if you dont use...
HKLM\Comm\ConnMgr\Planner\Settings\
CacheTime = 10 (sec.)
SuspendResume = GPRS_bye_if_device_off
http://forum.xda-developers.com/search.php
Dear all,
thank you for your suggestions. The registry is already a good start for me. Many thx. The commgrpro also looks very good. It seems to allow also the disconnect after a certain amount of time.
Anyway, I think I have to program it on my own: My dream would be to have a software which I can tell that I allow Access to the net from now on. Then the software is switching on wlan in the background and constantly scans for open or prefered networks. If such a network is found I would like to get connected to it. If somehow the WLAN connection breaks down and access to the net is no longer possible, the app should ask if I would like to use UMTS instead of WLAN right now. If I answer yes, WLAN is switched off, the data connection is switched on, the transfer is taking place and afterwards the connection is cut off completely and WLAN is switched on again and hopefully finds another open access again
So the main benefit would be, that automatically only the WLAN is allowed to connect. All the dataconnection by UMTS have to be allowed and are immediately switched off.
I would like to program something like this if you can help me on how to start with it, as I have not programmed a lot for the WM Platform until now.
With best regards,
Joachim

Wi-Fi location

My Desire has a huge problem with determining my location in my home. I only use wireless networks to determine the location (I wouldn't have a GPS signal inside anyway). Sometimes my location is being incorrectly determined as Hamburg, Germany - and this was only a minor annoyance until it started changing the time zone to that of Germany. So, I would go to bed in the evening after setting my alarm, and I would wake up in Hamburg's timezone (or even in both timezones - the alarm going off twice). I enabled obtaining the time from the network (this could mean GSM or NTP or both).
The problem must be my wi-fi because:
- I used Google Maps with cellular location on wi-fi-less phone before, without problems
- The Desire's IP address is in the 192.168.*.* family, I doubt they would use that for geo-location
- The external IP address of my wireless router has always been located correctly (e.g. Google.com redirects me to the local website)
- The only explanation is that the SSID of my WiFi is registered in Hamburg and Andoid ignores all the previous reliable clues for location and sets the location based only on a completely unreliable SSID database.
I've been reading forums, and people say there is no way to submit or correct entries in this database. Does anybody know of a workaround or a solution to this?
I don't think it uses the SSID,but some one else asked about it and was refered to this
http://standards.ieee.org/regauth/oui/index.shtml
I think it's more likly to be by ip,anyway here's a link for that too
http://www.maxmind.com/app/city_accuracy
Thank you for the reply. You are right, it's not the SSID, as changing it has no effect. Also, my IP has always been correctly located, including in maxmind's database.
I now think the cause could be the MAC of the router... I can't change that (unless I get a new router) and I can't find any reference about a public database that Google is using. I need to find a solution to this and fast, because it's a deal-breaker and I would have to return the phone.
This is not an issue with your phone. It is a problem with Google maps and Google's location service. Google use the MAC address of the surrounding access points. I had an issue where my location was determined to be 200 miles away when using wifi in a rural area with only one access point in range. I was being placed at my previous address as that is where Google had catalogued the access point (possibly when doing the Street View survey). The only way that I'm aware of to improve this is to submit a bug report to Google on:
https: //services.google.com/fb/forms/wifibugs/
I'm surprised that Google don't collect data directly from Google maps when your phone can see GPS and WiFi signals in order to automatically update their system.
Sorry about the space in the above URL. The rules here didn't allow me to post a URL so I had to post it that way.
Through Google location and online IP trackers, I get placed as 60-300 miles away from my home since a year now- seems pretty random. Doesn't bother me really.
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
60-300 miles away wouldn't bother me either. For my location, it gets it wrong by over 1000 miles, while online trackers always get it right. And even that wouldn't be a problem if the phone wouldn't switch the timezone and mess my alarms and calendar.
I mean, what the hell? Cellphone towers and IP addresses are not precise, wifi can position you more accurately, but when these's a 1000 miles distance between the location returned with these methods, which one do you trust? I believe cellphone towers and IP addresses are always more reliable, because they are assigned in a controlled manner.

What does GPS actually require to work?

This might be a noob question, but I have a question regarding the GPS.
Does it require data to work? Or does it require data to work for certain GPS features?
I am going to Europe and need to decide if I will need to take my N85 unlocked and try and get a local SIM card there. I want to geotag my photos but don't know if you can since the EVO has no international roaming capabilities.
Does Geotagging (or any other GPS feature) require data to work or can some GPS functions work by connecting directly to the satellites?
pekosROB said:
This might be a noob question, but I have a question regarding the GPS.
Does it require data to work? Or does it require data to work for certain GPS features?
I am going to Europe and need to decide if I will need to take my N85 unlocked and try and get a local SIM card there. I want to geotag my photos but don't know if you can since the EVO has no international roaming capabilities.
Does Geotagging (or any other GPS feature) require data to work or can some GPS functions work by connecting directly to the satellites?
Click to expand...
Click to collapse
GPS will require data, especially if you plan on using some form of Geotagging.
Definitely take your N85 unlocked and have a SIM card -- leave your EVO at home, since the EVO is CDMA based and almost all networks in Europe are GSM based, your EVO won't be doing any calling/texting -- that is unless you want to get a huge ass bill for roaming every second?
I'm not 100% positive, but the way it works is that the GPS on the phone will try to connect to your carriers tower first and get all the information it needs from there... then any information it can't retrieve or has to upload (maps, geotag, etc) it'll use a universal satellites. These satellites are the ones that your phone connects to if it has to be tracked if you get lost (via 911) and are also the same ones Google probably uses for Maps, Navigation, etc -- since they provide a large amount of information.
Hope that helps.
pseudoremora said:
GPS will require data, especially if you plan on using some form of Geotagging.
Definitely take your N85 unlocked and have a SIM card -- leave your EVO at home, since the EVO is CDMA based and almost all networks in Europe are GSM based, your EVO won't be doing any calling/texting -- that is unless you want to get a huge ass bill for roaming every second?
I'm not 100% positive, but the way it works is that the GPS on the phone will try to connect to your carriers tower first and get all the information it needs from there... then any information it can't retrieve or has to upload (maps, geotag, etc) it'll use a universal satellites. These satellites are the ones that your phone connects to if it has to be tracked if you get lost (via 911) and are also the same ones Google probably uses for Maps, Navigation, etc -- since they provide a large amount of information.
Hope that helps.
Click to expand...
Click to collapse
Above information on GPS is wrong, I am not sure where to start to correct it. Lets not, and simply respond to the original question:
GPS is a global network, and works without any data. In fact a GPS device is receive only device, so it cannot even send. If you have a GPS device, it will work all over the world, though it may take a while in clear sky to get a cold fix for the first time after you crossed the Atlantic.
There is something called AGPS or assisted-GPS, which does use data by first requesting a rough fix from the phone network as well as the current position of all the GPS sats, which will speed up the first fix of the GPS a lot, but that is not needed per se, so if you have no phone signal, or no data roaming, GPS still works, just the first fix may take a bit longer.
Mind you, some phones have a broken AGPS implementation, which behaves strange on some phone networks, so you may want to configure it not to even try to use AGPS when abroad. Have it fall back to regular GPS. Then there will be no roaming or attempted roaming on behave of the GPS. GPS will never provide a (navigation) map, it will only ever give you a position, but for tagging, that is all you need.
As to your specific phones, I do not know the EVO specifically, but assuming Sprint did not put in some program to completely bock the phone when out of its network, since it is Android it will simply let you make pictures and GPS tag them without any network.
You do want to bring your Nokia though if you want to call people, Europe is indeed close to 100% GSM based on the 900 and 1800 Mhz frequencies.
cybermaus said:
Above information on GPS is wrong, I am not sure where to start to correct it. Lets not, and simply respond to the original question:
GPS is a global network, and works without any data. In fact a GPS device is receive only device, so it cannot even send. If you have a GPS device, it will work all over the world, though it may take a while in clear sky to get a cold fix for the first time after you crossed the Atlantic.
There is something called AGPS or assisted-GPS, which does use data by first requesting a rough fix from the phone network as well as the current position of all the GPS sats, which will speed up the first fix of the GPS a lot, but that is not needed per se, so if you have no phone signal, or no data roaming, GPS still works, just the first fix may take a bit longer.
Mind you, some phones have a broken AGPS implementation, which behaves strange on some phone networks, so you may want to configure it not to even try to use AGPS when abroad. Have it fall back to regular GPS. Then there will be no roaming or attempted roaming on behave of the GPS. GPS will never provide a (navigation) map, it will only ever give you a position, but for tagging, that is all you need.
As to your specific phones, I do not know the EVO specifically, but assuming Sprint did not put in some program to completely bock the phone when out of its network, since it is Android it will simply let you make pictures and GPS tag them without any network.
You do want to bring your Nokia though if you want to call people, Europe is indeed close to 100% GSM based on the 900 and 1800 Mhz frequencies.
Click to expand...
Click to collapse
I figured I was wrong, I stand corrected.

Problems Connecting to Network (T-Mobile) After Flight

Hi All,
I have a Pixel 2 updated with the latest OS and security updates. I regularly travel for business and a good chunk of the time once I land, I find I cannot easily reestablish connection to the mobile network (in my case T-Mobile US) after I land and turn off airplane mode. It usually takes several attempts at scanning networks, attempting to automatically connect, switching to manual connection, rebooting the phone, etc. until finally I can get a connection. Choosing to automatically connect often shows "connected to carrier" but I'm not connected until I reboot or go through a process that can sometimes take 5-10 minutes. In fact, automatically selecting a carrier is almost useless, even when roaming overseas. I've reset my phone, updated versions, etc. and the problem continues whenever I try to reestablish connection when changing areas. Any idea what might be causing it? It seems to happen more frequently in some areas rather than others, as if a switch of bands is an issue.
Not a showstopper issue but as an often as I travel, it becomes a big annoyance. Could this be a potential hardware issue?
Thanks,
Dave

G 7 play wouldn't re-connect to mobile network

Lost connection with O2 while 3 miles offshore - in full view of Bournemouth, Poole & Swanage. Came ashore, still no connection. Drove 4 miles home, still no connection. Only re-connected after power off and re-start. Had similar connection drop once before.
Is this lack of re-connection usual, or is there a fault?
corystes said:
Lost connection with O2 while 3 miles offshore - in full view of Bournemouth, Poole & Swanage. Came ashore, still no connection. Drove 4 miles home, still no connection. Only re-connected after power off and re-start. Had similar connection drop once before.
Is this lack of re-connection usual, or is there a fault?
Click to expand...
Click to collapse
Sorry for the belated reply. If you haven't yet resolved this issue, there are some remedies you can try. Sometimes, while traveling abroad, or otherwise outside of the normal coverage of your mobile provider, it may be necessary to change your band parameters within your cell radio menu. (To do this, open your dialer and enter *#"#4636#*#* and select PHONE INFORMATION from the list of options. This menu provides pertinent and technical info regarding your cellular radio (baseband), and gives you the option to change your preferred network type and band configs) But to start, I'm not very familiar with the O2 network; from my rudimentary research, it appears that its 2G, 3G and 4G coverage is vast and quite impressive overall as a global provider, claiming a 99% global 4G coverage area. So, I am in full agreement with your position -- that the disconnect you are experiencing is abnormal. Try these possible remedies:
• First and foremost, let's make sure your network configuration is optimal for O2's voice and data parameters. There are a couple of ways to do this, with the simplest being from device settings. Go to Settings>System>Advanced and select the option for Reset WiFi, mobile & Bluetooth. (Ensure that you are within a strong 4G coverage area when performing this step). Next, go to Settings>Network & Internet>Mobile Network>Advanced>Preferred Network Type. You will see a few options here, the first of which should be AUTOMATIC. Ensure that this option is set. Next you will see a menu for Access Point Names; select this option and ensure that (1) your APN is set to an O2 configuration and, if so, (2) that the parameters are correct and optimal for 02's recommended settings for your particular type of mobile plan and your region. O2's recommended APN settings, as well as a comprehensive how-to guide, can be found on 02's official website at this link:
https://community.o2.co.uk/t5/Android/Connecting-Android-Phone-to-Data-Services/td-p/544202 It appears that 02 can send the recommended APN settings directly to your device via texting the word ACTIVE to 2020. Once received, a normal reboot will be required.
Hopefully, these remedies will resolve your carrier disconnect issue. It is also very important that you are updated to the latest available Android OS version/build, because updates and optimizations to your radio firmware (baseband) are often encompassed within OTA update packages. If, after performing these steps, you are still experiencing the disconnect issue, please let me know. There are some more in-depth steps we can take to resolve the issue (e.g. the Cellular Radio Menu I mentioned in the beginning of this post.) There are also some fastboot commands which can be executed to more efficiently optimize your network settings to the parameters of your provider. Good luck and let me know if this works.

Categories

Resources