Related
Project Treble [Pie] For XZ Premium
Based on Sony Open Devices
I am not responsible for bricked devices, dead SD cards.
请中文用户遵守XDA规则，使用双语留言
Required files:
[Non-Tested]
[Tested]
V1.06-Patch:Link
You can replace the same file in /system/vendor/etc with V1.06-Patch, this patch could improve the performance a lot.
V1.05:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.zip
V1.0:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.zip
V0.95:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.zip
V0.93:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v8_yoshino.zip
V0.85:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v5_yoshino.zip
EDIT: AEX 6.2 and Magisk works fine with V0.85, with Disable ForceEncrypt @LSS4181
V0.8:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v5_yoshino.zip
V0.3:Link With: SW_BINARIES_FOR_XPERIA_ANDROID_9.0_2.3.2_V4_YOSHINO.ZIP
V0.2:Link With: SW_BINARIES_FOR_XPERIA_ANDROID_9.0_2.3.2_V4_YOSHINO.ZIP
V0.1:Link With: SW_BINARIES_FOR_XPERIA_ANDROID_9.0_2.3.2_V3_YOSHINO.ZIP
Twrp:Link
First: Flash Twrp I built which supports a Vendor Partition
Code:
fastboot flash recovery < DIR of recovery.img >
Second: flash Treble-xzp-VX.X.zip in Twrp .
Third: flash SW_binaries provided by Sony.
You can download it from Sony official website.
Code:
fastboot flash oem < DIR of OEM.img >
Fourth: Flash a GSI compatible System image and boot!
Update and known BUG:
V1.05:
Update:
1. Thermal back, you will not hot in this summer.
2. CPU quiet back.
3. F2FS support for cache(Qnovo) and userdata partitions.
V1.0:
Fix:
1. Source code update.
2. Cancel 90Hz.
3. Support Erfans's Android Q GSI.
Our treble file could support Erfans's Android Q GSI, You need to flash this fix.
If you meet crash, you need to delete vendor/overlay.
If you meet endless bootanimite, Try to force reboot.
Bugs:
Need to feedback.
V0.95:
Fix:
1. Source code update.
2. 90Hz Screen frame rate.
Bugs:
Need to feedback.
V0.85:
Fix:
1. Revert to HMP to get better performance.
2. Magisk Fix.
Bugs:
Need to feedback.
V0.8:
New feature:
1. Kernel EAS support.
2. Camera HAL3 support
3. Crosshatch HAL.
Fix:
1. Sleep dead bug totally fixed.
2. Camera disconnect bug fixed.
Bugs:
1. Magisk FC.
V0.3:
Fix:
1.Sleep dead bug should be fixed, tested on PE 9.0 GSI.
Bugs:
1.Camera disconnect after screen-off.
V0.2:
Bugs:
1. May sleep dead.
2.Camera disconnect after screen-off.
V0.1:
Bugs:
1. Wifi is broken(Only G8142).
2. USB connection is broken.
3. May sleep dead.
XDA:DevDB Information
Treble For XZP, ROM for the Sony Xperia XZ Premium
Source Codes
Link
Contributors
Sjll
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Testing
Created 2018-12-20
Last Updated 2019-08-12
wow awesome I will definitely look into this, im pretty curious about how did you did it and also this could be something big for our devices thanks!!
酷安来的支持大佬！！??
Awesome job thanks!
It's like a Christmas present
用这么多the显得不自然啊（#滑稽）
leiersai said:
用这么多the显得不自然啊（#滑稽）
Click to expand...
Click to collapse
发的时候太匆忙了，没有来得及润色（笑）。
leiersai said:
用这么多the显得不自然啊（#滑稽）
Click to expand...
Click to collapse
大佬牛逼，666
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
ddwf said:
大佬牛逼，666
Click to expand...
Click to collapse
回错人了，哈哈……
Awesome! You Made me very Happy. Now can i fully Focus on Treble Development! I will Support You with Feedback and maybe some possible Bug fixes. Keep Up the Work, you did a great start for now!
@Sjll
Thanks heaps mate, hugely appreciated, downloading a few different GSI's now
@Miustone
Any recommendations? Im downloading aosp extended and lineage 16.0 images now.
Beetle84 said:
@Sjll
Thanks heaps mate, hugely appreciated, downloading a few different GSI's now
@Miustone
Any recommendations? Im downloading aosp extended and lineage 16.0 images now.
Click to expand...
Click to collapse
AEX (AOSP Extended) and other Official GSIs are the best Images You can get for now (No big Bugs). Only one unofficial GSI was running good for Me and that was Pixel Expierence from XDA. I really have to find a way to edit the Vendor Content of our XZPs to gain more Features and stuff Like that. There are just many things i miss on my Xperia which are available on My AMOLED Axon 7 after editing the Vendor/OEM Image manually with Root... But no Wonder, the OEM Images are directly from SONY... But i'm looking Forward. Treble is the best what happend to Android in all this Years
Miustone said:
AEX (AOSP Extended) and other Official GSIs are the best Images You can get for now (No big Bugs). Only one unofficial GSI was running good for Me and that was Pixel Expierence from XDA. I really have to find a way to edit the Vendor Content of our XZPs to gain more Features and stuff Like that. There are just many things i miss on my Xperia which are available on My AMOLED Axon 7 after editing the Vendor/OEM Image manually with Root... But no Wonder, the OEM Images are directly from SONY... But i'm looking Forward. Treble is the best what happend to Android in all this Years
Click to expand...
Click to collapse
AEX is working nicely so far for me, this is a gamechanger for the XZP, I was beginning to look at new handsets but not for a while now.
WiFi working fine for me on G8141.
Miustone said:
AEX (AOSP Extended) and other Official GSIs are the best Images You can get for now (No big Bugs). Only one unofficial GSI was running good for Me and that was Pixel Expierence from XDA. I really have to find a way to edit the Vendor Content of our XZPs to gain more Features and stuff Like that. There are just many things i miss on my Xperia which are available on My AMOLED Axon 7 after editing the Vendor/OEM Image manually with Root... But no Wonder, the OEM Images are directly from SONY... But i'm looking Forward. Treble is the best what happend to Android in all this Years
Click to expand...
Click to collapse
is it possible to port dsee-hx and noise canceling on other ROMs?
Beetle84 said:
AEX is working nicely so far for me, this is a gamechanger for the XZP, I was beginning to look at new handsets but not for a while now.
WiFi working fine for me on G8141.
Click to expand...
Click to collapse
Same here in all Points. What a nice Gift to the Holidays My XZ Premium feels like a actual Device again. Think i'll get one for My GF too. The Prices are low atm and it's just a Solid Piece of Hardware combined with Treble. Was thinking about Xiaomi for her but the G8141 plays Out the Most actual Devices in the Price Range (~300€). Only real Upgrade for me could be a XZ3 but looks like that has to wait now...
Edit. Think the XZ Premium has the better Design and Speaker Layout. But damn, i would Like to have a 1440p OLED SONY ?
@OP
Could You add the Vendor Partition to the Wipe Menu ,and System and OEM/Vendor Options in the Image Flash Menu from TWRP? I have that Options on My Axon 7 (OKI Labs TWRP Mod from XDA). I'm also unsure if the AROMA TWRP Patch Out of this Forum is already included. The TWRP Versions we use is a bit older i think (3.1.xxxx).
Everything besides Bluetooth is working really Well. Performance is a lot better compared to My Axon 7 and more will be possible after playing around with the Vendor Content. Great Base to Play with!
Thanks again! I'll spent a Coffee next Year!
Just modified the source codes and complied it.
@Miustone how's the camera in our XZP with AEX? Is it still as 'grumpy' as it was on Oreo?
I remember you working on enhancing the camera for AOSP.
ricardo99831390 said:
wow awesome I will definitely look into this, im pretty curious about how did you did it and also this could be something big for our devices thanks!!
Click to expand...
Click to collapse
Just modified source codes, and compile it.
Beetle84 said:
@Sjll
Thanks heaps mate, hugely appreciated, downloading a few different GSI's now
@Miustone
Any recommendations? Im downloading aosp extended and lineage 16.0 images now.
Click to expand...
Click to collapse
Hope you can enjoy it.
Miustone said:
Awesome! You Made me very Happy. Now can i fully Focus on Treble Development! I will Support You with Feedback and maybe some possible Bug fixes. Keep Up the Work, you did a great start for now!
Click to expand...
Click to collapse
The SODP team has done a lot of work on Pie GSI compatibility. I just use the existed partitions and modified source code to make treble works on XZP.
william84 said:
@Miustone how's the camera in our XZP with AEX? Is it still as 'grumpy' as it was on Oreo?
I remember you working on enhancing the camera for AOSP.
Click to expand...
Click to collapse
It is much better right now. Full Camera 2 API Support including RAW and with the right APP like Open Camera do You have full Control of everything. The Sleep Dead Bug is with AEX no problem btw. Just enable the Always on Display Option and it will never sleep. Battery is pretty good and i get over the whole day with LTE+, Wifi and 4hrs+ Display usage. The Treble Kernel is really good and with some fine tuning with Kernel Adiutor is everything even better
I'm playing right now with the Vendor Partition eg. the build.prop and gained already some nice optimizations like better responding Ok Google Commands and better Noise Reduction. I think there will come soon some good stuff to Treble on our Xperias :fingers-crossed:
Miustone said:
It is much better right now. Full Camera 2 API Support including RAW and with the right APP like Open Camera do You have full Control of everything. The Sleep Dead Bug is with AEX no problem btw. Just enable the Always on Display Option and it will never sleep. Battery is pretty good and i get over the whole day with LTE+, Wifi and 4hrs+ Display usage. The Treble Kernel is really good and with some fine tuning with Kernel Adiutor is everything even better
I'm playing right now with the Vendor Partition eg. the build.prop and gained already some nice optimizations like better responding Ok Google Commands and better Noise Reduction. I think there will come soon some good stuff to Treble on our Xperias :fingers-crossed:
Click to expand...
Click to collapse
Cheers for the always on display tip, aex will be my daily driver now.
Project treble for Xperia X Performance
Based on Sony Open Devices
If you end up with a HARD BRICK. Nobody can help you.
Features:
1. Gcam Support
2. Higher performance than SODP default.
Stable Version:
V4.2
Our treble file could support Erfans's Android Q GSI, You need to flash this fix.
If you meet crash, you need to delete vendor/overlay.
If you meet endless bootanimite, Try to force reboot.
Required files:
V1.0~V5.1: Link With:SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_tone.img
TWRP: Link
OEM: Link
Sony offcial link
How to flash:
Read README.txt in the zip file please.
GSI:
I tested Descendant.
Different GSI have different compatibility with our treble blob, try more GSI, you will solve all the issues you met.
Gcam:
Gcam must work with Google play services.
I prefer releases from ARNOVA8G2,(Gcam_6.2.030_Advanced_V2.2beta5.190704.1015.apk)
Download: Link
Enable this settings under fix
•Raw Format to Raw10
•Viewfinder Format to YUV_420_888
If you want to set Raw Format to Raw Sensor
Please enable: Buffer Fix to Fix viewfinder lags.
Update and known BUG:
V5.1:
1. Optimize EAS, more stable.
2. Support dual sim cards.
V5.0:
1. Stable EAS support.
2. I/O speed up.
V4.2:
I forget what's the updates.
V4.1:
1. Thermal back, you will not hot in this summer.
2. CPU quiet back.
3. F2FS support for cache(Qnovo) and userdata partitions.
V4.0:
1. Performance and stability improve.
2. A lot of Fixes of SODP.
V3.1:
1.Update: Performance improve.
V3.0:
1.Update: EAS supported.
TWRP V2.0:
1.Update: Fix userdata can't be read.
V2.0:
1.Update: Performance improve.
V1.0:
1.BUG: Not found.
Source
Sources Code
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Contributors
Sjll
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-07-11
Last Updated 2019-08-23
Hello,
thank you for your hard work.
Do I understand correctly that you've user 9.0.0_r10 branch of local_manifests when you built it?
Or did you actually checked out the latest one (i.e., 9.0.0_r44)?
hn40cn said:
Hello,
thank you for your hard work.
Do I understand correctly that you've user 9.0.0_r10 branch of local_manifests when you built it?
Or did you actually checked out the latest one (i.e., 9.0.0_r44)?
Click to expand...
Click to collapse
Based on lastest 9.0.0_r44.
I follow readme.txt and got bootloop. I wonder what have I done wrong.
edit: It's finally works!! I've to install Magisk, gapps right after install GSI roms. I don't know which one made it boot.
edit2: It just works so far. Sim card didn't work. Some GSI roms throw me to bootloop no matter what I've done. I would love to wait more clearly instraction and example of GSI that works perfectly
Sjll Back at treble in Xperia x again!
Performance edition this time
thaneekl said:
I follow readme.txt and got bootloop. I wonder what have I done wrong.
edit: It's finally works!! I've to install Magisk, gapps right after install GSI roms. I don't know which one made it boot.
edit2: It just works so far. Sim card didn't work. Some GSI roms throw me to bootloop no matter what I've done. I would love to wait more clearly instraction and example of GSI that works perfectly
Click to expand...
Click to collapse
You need to try different GSI, some GSI don't suit for our treble build.
I tested Pixel Experience.
I will try sim card. I noticed there is IMEI in about phone, so I think sim card should works fine.
thaneekl said:
I follow readme.txt and got bootloop. I wonder what have I done wrong.
edit: It's finally works!! I've to install Magisk, gapps right after install GSI roms. I don't know which one made it boot.
edit2: It just works so far. Sim card didn't work. Some GSI roms throw me to bootloop no matter what I've done. I would love to wait more clearly instraction and example of GSI that works perfectly
Click to expand...
Click to collapse
After I tested, on some GSI sim works, it's not related with our treble build. Please try this GSI.
https://github.com/Descendant/InOps...tZero/Descendant_ThreeDotZero_arm64_aonly.zip
Homepage:
https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578
2.0 stable
Havoc-OS 2019-07-12
So far so good. stable so far. But overheat is no joke.
edit:20/7/2019 Heat issued solved. I use this to tame down Snapdragon820. That's just cpu profile so it's will work on any device anyway.
Download the APK, install and grant root permission. No need to flash the zip file. I select Balanced >> Ghostpepper profile.
Omnirom Unofficial 15-07-2019
Best of the best. Not even had heat issues. Is that black magic?
3.1
Now It's work perfectly on my F8132. Thanks a lot.
edit: Yeah It's works. But have issues about random reboot while launching random app or perform random action. Might be rom or overheat isssue. Descendant 3.1.1
edit2: on 3.1
Sjll said:
You need to try different GSI, some GSI don't suit for our treble build.
I tested Pixel Experience.
I will try sim card. I noticed there is IMEI in about phone, so I think sim card should works fine.
Click to expand...
Click to collapse
Any bug on pixel experience gsi? Sorry for my bad english. And thanks for your hard work
Ralvindo said:
Any bug on pixel experience gsi? Sorry for my bad english. And thanks for your hard work
Click to expand...
Click to collapse
So....i dont own an xperia x performance BUT a normal xperia x
And on there the only Problem is that there is an annoying message at Boot
But except that everything is fine
Some random said:
So....i dont own an xperia x performance BUT a normal xperia x
And on there the only Problem is that there is an annoying message at Boot
But except that everything is fine
Click to expand...
Click to collapse
Ok i'll try and give a review here ?
Ralvindo said:
Ok i'll try and give a review here ?
Click to expand...
Click to collapse
:good:
I've got bootloop on latest version.
thaneekl said:
I've got bootloop on latest version.
Click to expand...
Click to collapse
Could you please test the new boot.img with old vendor.img and new vendor.img with old boot.img ?
I need to find the reason.
Sjll said:
Could you please test the new boot.img with old vendor.img and new vendor.img with old boot.img ?
I need to find the reason.
Click to expand...
Click to collapse
It's boot now. Maybe the issues is on my side since my device refuse to boot on any kernel even patched stock kernel at the time
You tried run Erfans's Android Q GSI ? I have endless bootanimation after boot. What i doing wrong?
thaneekl said:
It's boot now. Maybe the issues is on my side since my device refuse to boot on any kernel even patched stock kernel at the time
Click to expand...
Click to collapse
OK.
plombir0032 said:
You tried run Erfans's Android Q GSI ? I have endless bootanimation after boot. What i doing wrong?
Click to expand...
Click to collapse
I written "need test". It works on XZP.
plombir0032 said:
You tried run Erfans's Android Q GSI ? I have endless bootanimation after boot. What i doing wrong?
Click to expand...
Click to collapse
Our treble file could support Erfans's Android Q GSI, You need to flash this fix.
Why i can't change the minimum frequency in kernel aduitor? Cores always at high frequency, minimum not applied.
SO-04H
hi
is this work on so-04h docomo ?
Hey, I need testers that will test custom rom builds for merlin.
Anyone interested ping me on telegram at MOD EDIT: Link Removed
thx for info God bless you
itexpert.120 said:
Hey, I need testers that will test custom rom builds for merlin.
Anyone interested ping me on telegram at MOD EDIT: Link Removed
Click to expand...
Click to collapse
Bro this roms will be ported or what??? Cuz as i know Xaiomi didnt release the kernel source code yet!!
Mahmoud_helal79 said:
Bro this roms will be ported or what??? Cuz as i know Xaiomi didnt release the kernel source code yet!!
Click to expand...
Click to collapse
They are going to be built from source using the prebuilt kernel
Good morning Master, as far as I know there is not yet a twrp for this device, how will a custom ROM be installed without Twrp ..?
I also wanted to know if a Rom based on AOSP will work ..?
straikerxd said:
Good morning Master, as far as I know there is not yet a twrp for this device, how will a custom ROM be installed without Twrp ..?
I also wanted to know if a Rom based on AOSP will work ..?
Click to expand...
Click to collapse
I guess there is this... https://unofficialtwrp.com/twrp-3-4-1-root-redmi-note-9/
Not tried it, can't vouch for it
thesoupthief said:
I guess there is this... https://unofficialtwrp.com/twrp-3-4-1-root-redmi-note-9/
Not tried it, can't vouch for it
Click to expand...
Click to collapse
In the link that you cited you have an unofficial Twrp, let's remember that there are specific models such as the 4 and 3 gb ram variants, and also those that come with NFC, that Twrp reports more failures than successes.
straikerxd said:
In the link that you cited you have an unofficial Twrp, let's remember that there are specific models such as the 4 and 3 gb ram variants, and also those that come with NFC, that Twrp reports more failures than successes.
Click to expand...
Click to collapse
Good points well made
straikerxd said:
In the link that you cited you have an unofficial Twrp, let's remember that there are specific models such as the 4 and 3 gb ram variants, and also those that come with NFC, that Twrp reports more failures than successes.
Click to expand...
Click to collapse
There are different methods to install twrp on NFC one and non NFC one
If you have NFC one then follow the XDA thread(a bit complicated)
If you're like me and have thr non NFC one, then simply watch this https://youtu.be/bPBbkIEEx7M
I'll will represent as a tester will ping you in telegram
Hey @itexpert.120 Can you Help me with somethings on this redmi note 9?
THREAD CLOSED
@itexpert.120 XDA is not an advertisement platform for recruitment of testers on Telegram.
Regards,
shadowstep
Forum Moderator
This is not my build. Credit ny-hardcore for all the hard work on this. I'm just posting it.
Screen call is broken.
This is Lineage 18, Android 11 custom rom for the Pixel 4a Sunfish
If you do not want root, you can stop after step 6
1. Reboot to bootloader
2. fastboot flash --slot all boot recovery.img https://drive.google.com/file/d/1Hh7D_UbnnoTRr1XbC9i0-dvtFgbuFqrP/view?usp=sharing
3. Reboot to recovery
4. factory reset
5. adb sideload lineage-18.0-20201209-UNOFFICIAL-sunfish.zip
https://mega.nz/file/cUlVXApI#NbzUJ6UlyQvyPTitKnW7uJG_tHrsfYor9O0dH4yIiWc
6. Reboot to system
7. Install Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/canary/app-debug.apk
8. Reboot to bootloader
9. fastboot flash boot magisk_patched.img https://drive.google.com/file/d/1cONN9Ev0jdAHaRSeOeYyeRTONJ-yO_8-/view?usp=sharing
10. Reboot to system
Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.
liamwhite said:
Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.
Click to expand...
Click to collapse
Based on the fact that this is NOT my work as stated above, I'm NOT at liberty to tell you. No offense. I would contact xda member edmontonchef and ask him. He's the one who sent it to me. I would like to think this wouldn't be a issue because if it was mine, I wouldn't care, but it's not.
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
I'm using it right now. Great Rom. Thank you!!! Hope you don't mind I shared it.
Does this support signature spoofing?
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
Would doubt it, if it's just vanilla LOS
ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
Are Gapps included. Looking for a non gapps rom
EggZenBeanz said:
Are Gapps included. Looking for a non gapps rom
Click to expand...
Click to collapse
No gapps. Minimal Google play service function are included in build.
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
No
TheSayaMan said:
No gapps. Minimal Google play service function are included in build.
Click to expand...
Click to collapse
Actually it contains gapps/Google play.
ny-hardcore said:
Actually it contains gapps/Google play.
Click to expand...
Click to collapse
I guess I assumed wrong. I thought he was referring to having to flash a seperate gapps zip.
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G
ny-hardcore said:
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G
Click to expand...
Click to collapse
Oh yeah! Would love to see that. I'm ready to hop from my pixel 3xl once there's a non gapps ROM available
New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.
TheSayaMan said:
New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.
Click to expand...
Click to collapse
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
I haven't been able to check everything out. One thing I just noticed is that I am unable to pass safetynet with it but not a big deal for me.
Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.
TheSayaMan said:
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.
Click to expand...
Click to collapse
december hasnt been merged in lineage sources
Is the boot.img a twrp recovery or? I am coming from stock, so would i need to touch twrp at all for this?
I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.
GrapheneOS has test builds up for A13, which should be buildable using the normal approach. Also hardened with some extra security features.
Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.
I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com
Schnedi said:
I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help
liggerz87 said:
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help
Click to expand...
Click to collapse
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it
Schnedi said:
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it
Click to expand...
Click to collapse
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}
alvin14 said:
Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.
Click to expand...
Click to collapse
Update on this for ArrowOS. After removing connectivitythernmalmanager that fixed the issue as i am getting selinux denials with it, everything works, been testing for a few days.
alvin14 said:
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}
Click to expand...
Click to collapse
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot
Schnedi said:
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot
Click to expand...
Click to collapse
Do a logcat during boot, will definitely help with that.
card13 said:
I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.
Click to expand...
Click to collapse
There is a build of Hentai which is very good. You can even dirty flash from stock
alvin14 said:
Do a logcat during boot, will definitely help with that.
Click to expand...
Click to collapse
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?
Schnedi said:
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?
Click to expand...
Click to collapse
Adevtool. The other one works as well however i need to clean it up a bit.
hi guys,
@Schnedi what gapps package are you using for prime?
And does udfps work on your raven with your prime base?
Well, after a dozen of test builds, I finally made it work
Still have to fix things tho
Schnedi said:
Well, after a dozen of test builds, I finally made it work
Still have to fix things tho
Click to expand...
Click to collapse
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?
ny-hardcore said:
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?
Click to expand...
Click to collapse
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it
Schnedi said:
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it
Click to expand...
Click to collapse
Thanks for the reply, i spark gapps too by the way haha
i picked udfps myself so had it working already
i like your vendor /vendor/extras very clean setup.
i know how to fork, but no need for now